Reddit mentions: The best car washing sponges & mitts
We found 147 Reddit comments discussing the best car washing sponges & mitts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 26 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. AUTOSCRUB Fine Grade Sponge [AS-019]
- Lasts up to 10 times longer than clay bars
- For a flawless “show room perfect” shine
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
Features:
Specs:
Color | Blue |
Height | 2 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Release date | May 2013 |
Size | 4.6 x 2.9 x 1.3 inches |
Weight | 0.02 Pounds |
Width | 3.5 Inches |
2. Chemical Guys MIC_493 Chenille Microfiber Premium Scratch-Free Wash Mitt, Lime Green
- Premium scratch free car wash mitt: Keep your car clean without scratching it with this super soft microfiber car wash mitt
- Extra plush & absorbent: You wouldn't wash your body with porcupine right, so don't do it to your car either. This wash mitt is super soft, and holds water and soap, so your wash is easier and faster
- Double stitched elastic cuff: Tight fitting cuff keeps the mitt on your hand, not on the ground or the bottom of your bucket
- 100 Percent machine washable: When you are done with your wash, simply add the car wash mitt to your regular wash and wash it on gentle cycle; Low heat
- Make your microfiber last longer: We recommend washing all of your microfiber wash mitts and towels with Chemical guys microfiber wash (sold separately)
Features:
Specs:
Color | Lime Green |
Height | 2.2799999976744 Inches |
Length | 9.6099999901978 Inches |
Number of items | 1 |
Release date | January 2013 |
Size | Regular |
Weight | 0.14991433816 Pounds |
Width | 7.0099999928498 Inches |
3. Relentless Drive Ultimate Car Wash Mitt (2 Pack, Extra Large) Premium Chenille Microfiber Lint and Scratch Free Sponge Glove
- LINT-FREE, SCRATCH-FREE, CAR SPONGE - Double-sided gentle, microfiber wash mitt. Safe for wash car, trucks, motorcycle, SUV, RV, boat or watercraft with your favorite car soap.
Features:
Specs:
Color | Blue |
Height | 0.00393700787 Inches |
Length | 11.49999998827 Inches |
Size | Extra Large, 2 pack |
Width | 11.99999998776 Inches |
4. Chemical Guys MIC_292_08 Premium Grade Microfiber Applicators, Blue (Pack of 8)
Gentle, yet strong fabric wrapped around a plush, absorbent spongeReliable and long lastingInside stitched 2 timesReduces product waste100 percent machine washable
Specs:
Color | Workhorse Light Blue |
Height | 2.99 Inches |
Length | 10.12 Inches |
Number of items | 8 |
Release date | March 2013 |
Size | Pack of 8 |
Weight | 0.05 Pounds |
Width | 6.42 Inches |
5. AUTOSCRUB Medium Grade Sponge [AS-018]
- Lasts up to 10 times longer than clay bars
- For a flawless “show room perfect shine
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
Features:
Specs:
Height | 2 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Release date | May 2013 |
Weight | 0.02 Pounds |
Width | 3.5 Inches |
6. 845100 Mesh Bug Sponge Cleaning Wash Sponge - 4 Inch x 6 Inch - Colors Vary
- Unique microfiber mesh safely removes stubborn debris from glass and paint
- High density sponge holds plenty of car wash solution
- Perfect when you need extra scrubbing power
- Clear coat safe
- Washable and reusable
Features:
Specs:
Color | Colors Vary |
Height | 2 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.02 Pounds |
Width | 4 Inches |
7. KENT 3 Polish Applicator Pads with Handle (5.1in) (Blue/White/Yellow)
- 100% microfiber.
- Ideal for cleaning, buffing and polishing inside and outside.
- The removable handle attaches to each pad to provide even application and to keep hands clean.
- Apply polish with the yellow pad.
- Remove polish with the white pad.
Features:
Specs:
Color | Blue/White/Yellow |
Height | 2.16929133637 Inches |
Length | 1.55118110078 Inches |
Number of items | 1 |
Size | 5.1in |
Weight | 0.14991433816 Pounds |
Width | 1.64173228179 Inches |
8. Griot's Garage 10268 Micro Fiber Wash Mitt (Set of 2)
- Soft micro fiber is safe and gentle on paint
- Mitt easily releases dirt when rinsed
- Machine washable
- Holds more water than a sheepskin mitt
- No thumb area so mitt rotates easily on your hand
Features:
Specs:
Height | 3.5 Inches |
Length | 14.75 Inches |
Number of items | 1 |
Weight | 0.65 Pounds |
Width | 11 Inches |
9. The Rag Company (2-Pack Premium Soft Microfiber Chenille Knobby Scratch-Free, LINT-Free Wash Mitts, One Royal Blue and One Lime Green
- Super slick formula
- Fresh cherry scent
- UV protection
- Reduces static cling by 75 percent
- Enhances shine and protection
Features:
Specs:
Height | 1.49999999847 Inches |
Length | 9.9999999898 Inches |
Weight | 0.6625 Pounds |
Width | 6.99999999286 Inches |
10. Mothers Genuine Lambswool Wash Mitt
- Rinse thoroughly and AIR DRY after each use
- Hand wash only and AIR DRY
- Thick wool pile gently traps dirt and debris perfect for car detailing
- Thumb design with a knitted cuff for comfort and control
- Holds suds well and rinses easily during car cleaning
Features:
Specs:
Color | Tan |
Height | 1.6 Inches |
Size | 9.5 in x 11 in (24.1 cm x 28.0 cm) |
Weight | 0.3 Pounds |
Width | 6.9 Inches |
11. Chemical Guys ACC145 Bear Claw Scratch Free Premium Wash Pad
- Ultra-plush scratch-resistant car wash Pad
Features:
Specs:
Height | 2.2 Inches |
Length | 12.3 Inches |
Number of items | 1 |
Release date | July 2016 |
Weight | 0.02 Pounds |
Width | 11.4 Inches |
12. AmazonBasics Deluxe Microfiber Car Wash Mitt
- Microfiber car wash mitt absorbs 7x its weight in water for fast, efficient results; can be used with plain/soapy water or for drying
- Lint-free, scratch-free, and non-abrasive to paint for peace of mind and superior results
- Elastic wrist cuff helps keep mitt in place on hand
- Machine washable for easy cleaning; can be reused again and again
- Mitt measures 12 by 8 inches; backed by an Amazon Basics limited one-year warranty
Features:
Specs:
Color | Gray |
Height | 9 Inches |
Length | 12 Inches |
Size | Single Mitt |
Weight | 0.3 Pounds |
Width | 1.5 Inches |
13. Carrand 40305 Champagne Sheepskin Wash Mitt
- Super deep genuine sheep skin
- Lifts dirt from surface
- Perfect polishing mitt when used dry
- Elastic cuff keeps mitt snug
- Preferred by car collectors and professional detailers
Features:
Specs:
Height | 7 Inches |
Length | 5 Inches |
Number of items | 1 |
Weight | 0.15 Pounds |
Width | 1 Inches |
14. Chemical Guys MIC498 Black Microfiber Wash Mitt, 1 Pack
- Premium, scratch-free car wash mitt
- Extra plush, absorbent, and exceptionally Soft
- Durable double-stitched elastic cuff
- Gentle on paint, tough on dirt and grime
- 100% machine washable and dryable - gentle cycle; low heat
Features:
Specs:
Color | Black |
Height | 0.004 Inches |
Length | 10.9 Inches |
Number of items | 1 |
Release date | July 2016 |
Size | Standard |
Weight | 0.3 Pounds |
Width | 8 Inches |
15. RouteGurus [3 Piece] MicroCareful Car Wash Mitt Bundle with 4 Bonuses, Professional Microfiber Lint Free, Scratch Free Washing Kit for Vans, Taxis and Automobiles
- CLAIM YOUR SPECIAL BUNDLE NOW ($18 worth additional EXTRA BONUSES): We always love to offer more. So right now, Your TOP RATED MicroCareful XL Car Washing Mitt comes with Free Premium Detailing Extras: (1) FREE: Super Absorbent “WaffleX” Premium Microfiber Waffle Weave Dry Towel (sold at $7.95) , (2) FREE: “MicroMitt XS” 3.9" X 4.7" Dusting Mitt (sold on Amazon at $9.99), (3) handy zippered Storage Bag & (4) PDF owner's Manual. It's the ShizMitt! YOU GET DOUBLE the value if you purchase today.
- SPARKLING SCRATCH FREE SHINE: Our Premium & Super-Soft Washing Mitt gets dirt & grime off your car without ever scratching the paint. Cleans faster, easier, safer - and it's lint-free, swirl-free, streak-free!
- SUPERIOR FIT FOR LASTING RESULTS - Perfect Fit for Both Men & Women: Unlike too-loose mitts that can fall off your hand, ours has a snug elasticized band, designed to fit any size wrist.
- ENGINEERED TO ENDURE: Don't be fooled by its fluffy softness. This plush chenille mitt is built for the long haul, with double-stitched seams & inner fabric reinforcement. Machine washable, too!
- CLEANS VIRTUALLY ANYTHING GUARANTEED or Your Money Back. Your experience with the products is our guideline. Our RouteGurus washing accessories & detailing tools are tested by both professional detailers and car enthusiasts, but if they don’t get your seal of approval, simply send it back within 2 YEARS for a Full Refund. GEAR UP BIG TIME with the Unique Auto Detailing Supplies from RouteGurus: BUY 3 MicroCareful Mitts - GET 1 FREE. Makes the Perfect Gift for the Car Enthusiast in Your Life !
Features:
Specs:
Color | Car Wash Mitt |
Height | 1.3 Inches |
Length | 9 Inches |
Size | XL Wash Mitt (9 " X 10.5 " ) + L Towel + S Duster |
Weight | 0.53 Pounds |
Width | 10.5 Inches |
16. uxcell 5 Pcs Assorted Color 8 Shape Cleaning Wash Sponge Pad for Auto Cars
Product Name : Car Wash Sponge;Material : SpongeColor : Peach Color, Yellow, Pink, Blue, GreenSize(Each) : 21.5 x 11 x 5.5cm/ 8.5" x 4.3" x 2.2"(L*W*T)Weight : 143g;Package Content : 5 xWash Sponge
Specs:
Color | "Peach Color, Yellow, Pink, Blue, Green" |
Height | 3.94 Inches |
Length | 12.2 Inches |
Weight | 0.31526103466 Pounds |
Width | 8.66 Inches |
17. Detail King Optimum Big Red Sponge
- Product Type: Utility Sponge
- Made in United States
- Package Dimensions : 3.0 L x 7.0 H x 5.0 W (inches)
- Package Weight : 0.02 pounds
Features:
Specs:
Color | Red |
Number of items | 1 |
Release date | November 2017 |
Size | 1 Pack |
Weight | 0.015 Pounds |
18. Chemical Guys MIC_491 Extra Thick Multi-Fiber Microfiber Wash Mitt
Scratch-free, lint-free and swirl-freeOne-size-fits-all wash mitt fits comfortably on your handCan be used wet or dry100 percent machine washable
Specs:
Height | 1.29921 Inches |
Length | 9.48817 Inches |
Number of items | 1 |
Release date | January 2013 |
Weight | 0.19996577064102 Pounds |
Width | 7.28345 Inches |
19. Griot's Garage 11205 Blue Detail Sponge (Set of 2)
Foam applicator for tire and interior dressingsBuilt-in notches for easy and no-mess gripFoam material keeps product on surface, not absorbed in the padUse less product per applicationApplies even coating of dressing
Specs:
Height | 2 Inches |
Length | 7.8 Inches |
Number of items | 1 |
Weight | 0.15 Pounds |
Width | 5.7 Inches |
20. Viking Car Care Bone Grip Wash Sponge
Designed to clean large surfaces fasterBone shape offers better grip with wet handsHigh density foam holds plenty of car washing solutionHighly durableEasy to use and maintain
Specs:
Height | 5 Inches |
Length | 8 Inches |
Number of items | 1 |
Release date | December 2015 |
Width | 3 Inches |
🎓 Reddit experts on car washing sponges & mitts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where car washing sponges & mitts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've always struggled to keep my vehicles clean because 1) they were always old, 2) I've lived in condos, 3) car washes did a terrible job / detailers charged too much, and 4) I didn't realize you could do all of this yourself pretty effectively.
When I bought a new truck at the beginnging of the year, I randomly stumbled upon an Ammo NYC video and the nerd / clean-freak was intrigued. A couple dozen videos later, and I was hooked. Shout out to Larry for your passion - thank you for the insane amount of information on your channel. (Wish I could afford all of your products, or that you had some of them on Amazon!).
Living in a condo, I have to swing by my local coin wash and take up a bay with a few buckets during off-peak hours, but I've gotten it down to 1.5 hours and looking like this every time.
I've only been doing this for a few months, but thought I'd share the products I've researched and selected based on reviews and costs. Hope this helps save someone time!
TOOLS
BUCKETS
CHEMICALS
INTERIOR
WHEELS
TOWELS
Ok, after four months with the car, here goes...
​
Charging
Tesla OEM
Detailing
Third-Party
Hope this helps! This isn't an exhaustive list of the best professional products but some of the best top rated affordable and highly rated by forums and high subscriber YouTubers. I'll try to answer questions as they come. Thanks for all tye comments and positive/critical feedback. Promise is all helps in the end!
Wash/Decontamination
Wheels/Tires
Compounding/Polishing
Finshing Wax/Protectant/Plastic & Trim Restorer
Interior/Glass Cleaners
Convertible Fabric Top Cleaner/Protectant/Sealer
Microfiber Cloths/Car Drying Microfiber Cloths/Buffing Microfibers/Brushes/Etc.
I'm reposting some suggestions I made from a previous similar thread, hope it works out for you (the last person's budget was $100; not sure what yours is, but you can pick and choose!)
 
Optimum No Rinse: Concentrated and capable of being diluted as a wash, quick detailer, clay lubricant, window cleaner, light interior cleaner, and more.
Optimum Opti-Seal: Incredibly easy to use sealant (wipe on and walk away!), can be used in place of RainX on windows, good drying aid, and useful as an interior dressing as well. Opti-seal ALL the things!
Detailing brushes: Because every detailer can use more brushes!
Nanoskin Autoscrub Sponge: Makes the process of decontaminating your paint much faster. Much longer life than clay and can be used even after dropped on the ground! Use the ONR as lubricant and you save tons of money.
The Rag Company Eagle Edgeless Towels, 4 pack: These will be the best towels he's ever used.
The total for all of this should be $97.96, just under your budget :)
 
A couple other suggestions if you want to mix and match:
Smaller Opti-Seal: Since it's the biggest budget item here and a little goes a long way, you can go with the small one to include more items in your bundle.
Adam's Wheel Cleaner: The least terrible smelling wheel cleaner, but extremely effective as well. Good if that truck throws a lot of brake dust.
CarPro PERL: For protecting exterior plastics as well as dressing them, and for use as a satin look tire dresing.
Wheel Woolies: Makes cleaning wheels a much nicer experience, and won't fling brake dust into your face like the brushes do.
Hope this helps! If you want any more specific recommendations for any category, feel free to ask! As for things to avoid, Armorall, Turtlewax and Chemical Guys in my opinion.
I would reccomend these materials for the two bucket wash method. Its probably the most common method, and one of the safest. There are plenty of youtube how to's on this. These are the materials you'll need.
Not Necessarily essentials, but recommended.
I don't think you need anything like a DA at this point. Others will have recommendations for you, and I encourage you to take their advice as well. Some great youtube channels are Ammo NYC, Larry is a master at explaining how to's. He has is own line of products but they're expensive. You can even email him with questions and he'll respond quickly and go above and beyond to explain somethingto you. Junkman, also another great channel. Chemical Guys, they have some pretty good products but their customer service is shit. Their youtube videos are pretty good but all they do is upsell their products.
I'm fairly new to detailing like you. I dont have the best products, but what I use seems to work for me. There are better products out there but budgets can only be so large.
2015 Ford Focus ST
I performed my Express Detail on this 2015 Ford Focus ST for a client. This client emailed me Thanksgiving morning hoping I could help with a gift his best friend "spilled" in his vehicle. I couldn't help him since I was on my way out of town, but I gave him instructions of how to help get the gift out. He ended up booking me to come over when I got back :)
His car is pretty new (a month + if I remember correctly), so my Express Detail was perfect for his vehicle.
This package is my most popular as I believe it's the most bang for your buck (or at least I tried to price it that way).
Products Used:
Wash
Wheels
Decontamination
Clay
1-Step
Interior
Notes
I found out that there is a special trick to putting this car in reverse. It involves lifting the collar below the shift knob. It's actually pretty interesting.
Price: $215 + TIP
Time: 4.5-5 Hours
Thank you for your business fellow redditor :)
Definitely check out /r/AutoDetailing where I learned my method.
The way I do it:
Equipment:
Washing:
Rinseless washing is great when your car is mildly to semi-dirty. This means if it's mostly just dust on your car this is great. Otherwise if it's caked with mud this won't work. You'll have to go somewhere to hose your car off with water first so it's not as dirty.
Clay Bar/Nanoskin:
Note: This is only necessary if there are actually micro-contaminants. I would do it on a new car regardless since it has been sitting on a lot. On a normal basis you only need to do when your car doesn't feel glass smooth after a wash. Usually no more than 1-2 times a year.
Sealant/wax:
After you're done with claying your paint is clean so you'll want to put wax/sealant on it to protect it. It'll make your car nice and shiny too.
Start with an isopropyl alcohol wipe. What I do is dunk a towel in the alcohol solution and wipe down every panel and drying after it. You can also just fill another spray bottle with it and spray. This will get rid of oil/wax/sealant so the sealant goes directly on the paint. Then just apply the sealant/wax on following the instructions. With opti-seal you just spray and wipe. With some other items you'll need to apply and wait to cure and buff out any remaining wax/sealant.
For wheels and tires I suggest you just check out the wiki on autodetailing. I just simply wipe off the tires with ONR but ONR isn't the best at getting oil. I'm too lazy though to worry about it too much as long as the wheels look clean it's fine with me.
I'm lazy and do a rinseless wash 1-2 times (usually 1) a month. Some do it weekly. I put sealant on every 3-4 months or so. I've only clayed my current car once so far.
honestly, i wouldn't get either of those. yeah they're both good, but you really don't need all of that.
what i use:
griot's garage clay
meguairs soap
mothers cleaner wax
nu finish
and of course a (or a couple) 5 gallon buckets with a grit guard , which is completely not necessary, but highly recommended by professional detailers. i don't use one, and my car comes out fine. and a good, soft wash mitt. either a good sponge or a wheel brush for your wheels would be needed as well.
my once a year routine is as follows:
wash, claybar, nu polish, cleaner wax
usually wash every 2 weeks or so, and rewax every 6 weeks or so. if i did a bunch of off roading and the paint is gritty i'll clay as needed, but usually it's once a year.
also head over to /r/autodetailing for a lot of tips. beware though that they use a lot of very high end products, and circle jerk over polishing and getting perfect reflections. if all you're looking to do is keeping your paint in good condition, then what i do is just fine. if you're interested in keeping your paint better than factory, follow them.
Waxing is simple. There are a ton of products these days that won't require much work to keep your car protected. The easiest are the spray waxes. Use after you wash once a month(or more) and you'll be nice an protected. If you need some paint correction (i.e. polishing) and you aren't comfortable with it, you will have to spend a couple hundred if you want someone to do a good job and not actually damage the paint. Be careful of the "FUll Detail" for under $100 guys. If correction is what you need, I can suggest Odds and Ends Detailing in Sterling. If that is too far out from where you are, you might want to give them a call and ask if they can recommend someone closer. The owner is a very nice guy.
​
Some general tips on keeping your car looking good.
How To: Decontaminate your paint & wheels
Note: When using a clay bar and/or sponge, you will feel the contaminants being picked up. When running over the paint or wheels, you’ll feel little bumps. Keep the clay/sponge motion going and the bumps should go away. It’ll start to feel smooth. To be 100% sure you’ve gotten everything up, place your hand in a plastic sandwich baggy and run your hand over the paint. Because of the ‘finer’ surface area of the bag, you’ll feel what you missed. https://www.youtube.com/watch?v=Ml434m7ILNA Here is a video of Mike Phillips explaining it.
Congrats! Your car should be contaminant free and ready to be polished!
Dodo Juice Ferrous Dueller
The Mother's & Meguiar's Clay Bar Kits can be found over the counter for about $15-20.
NanoSkin Fine Grade Sponge
Optimum No Rinse
CG Citrus Wash & Gloss
Hello,
I've read the wiki and its a huge resource. Thank you to all who put it together!
Some of the product reccommedations are unavailble on Amazon so I just wanted to ask a few questions with regards a brand new car I bought and see if these products are whats needed:
So firstly, washing the exterior of the car:
I have Meguiars Gold class wash, I have two buckets, and grit guards, I will do the two buckets method. Now do I dry the car with:
this: https://www.amazon.com/gp/product/B01ERU0F3A/ref=ox_sc_act_title_5?smid=A1RKELVBY446LD&psc=1 or
this: https://www.amazon.com/gp/product/B00GXRFLY4/ref=ox_sc_act_title_3?smid=A1RKELVBY446LD&psc=1
Once I have washed the outside and dried it with the towels, I then apply the wax, I will be using #845 - can I use these to apply it:
https://www.amazon.com/Viking-Car-Care-Microfiber-Applicator/dp/B0051MYL8E/ref=pd_bxgy_263_2?_encoding=UTF8&pd_rd_i=B0051MYL8E&pd_rd_r=BG4S92NE1D9CH9E2J67C&pd_rd_w=HVEIG&pd_rd_wg=6EheM&psc=1&refRID=BG4S92NE1D9CH9E2J67C
I know I needs to get a clay bar or a micro sponge I'm just not sure where/how this fits into the process, what items do I need to buy
These?
https://www.amazon.com/Mothers-07240-California-Gold-System/dp/B0002U2V1Y/ref=pd_bxgy_263_3?_encoding=UTF8&pd_rd_i=B0002U2V1Y&pd_rd_r=BG4S92NE1D9CH9E2J67C&pd_rd_w=HVEIG&pd_rd_wg=6EheM&psc=1&refRID=BG4S92NE1D9CH9E2J67C
https://www.amazon.com/gp/product/B00CUAWJ6G/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
Lastly, I am buying this window cleaner -
https://www.amazon.com/gp/product/B0006SH4KU/ref=ox_sc_act_title_8?smid=ATVPDKIKX0DER&psc=1
Is it safe to use inside and out? I would imagine spray directly on outside windows and just use some microfiber towels like this - https://www.amazon.com/gp/product/B00WC5KQGE/ref=ox_sc_act_title_4?smid=A1RKELVBY446LD&psc=1 to clean it off? On the inside I would imagine spraying directly onto the cloth would be better.
Do I clean the outside windows after the car has been cleaned and waxed?
I understand the basic process and with this being a new car I want to be 100% I'm doing the right thing, I fully intend on washing it every other week and taking great care of it!
Thanks
Tim
I apologize in advance for this long post. None of these are "must gets", but they are what I got for my 2016 Premium forester. I'm posting this for my own future reference as well as to help some people who are wondering what accessories might be good for their new forester. I highly recommend ordering from Jackie from Annapolis Subaru @ 443-837-1422 as she can get you some good prices on the subaru accessories as well as WeatherTech products! I saved on WeatherTech shipping costs (~$20) by ordering through Jackie and the warranty is the same as if I had bought them through their website.
Please note that some of these accessory links are for my specific car year, model and configuration. I have a 2016 Premium forester without eyesight (affects the Covercraft/heatshield sunshade - they also have eyesight compatible sunshades!).
Also, I personally didn't get my windows tinted, but I think that is something that you should seriously consider doing :)
Speaker kit
Tweeter kit
WeatherTech DigitalFit floorliner (1st & 2nd row)
WeatherTech cargo/trunk liner (without bumper protector)
Weather Tech TechCare floorliner and floormat Cleaner/Protector Kit
Gorilla mud flaps
Covercraft's UVS100 sunscreen - use promo code FREESHIP
Exterior Auto Dimming Mirror w/ Approach Lighting
Luggage Compartment Cover (manual rear gate)
Rear bumper cover
Auto-Dimming Mirror with Compass and HomeLink
Rear Seat Back Protector
Two Home Depot 5 gallon homer bucket
Heatshield sunshade (driver/passenger, second row, rear windshield, sunroof) - note that their website only shows only one side window (driver/passenger), you need to call in to ask them to add the second row side window ones - on my invoice it says part #1425S-A and #1425S-B
Antigravity Batteries AG-XP-10 Multi-Function Power Supply and Jump Starter (check eBay to see if priced cheaper)
Viair 77P Portable Compressor Kit (check eBay to see if priced cheaper)
Amazon stuff:
EZ Pass Holder for VA Flex
Aux cable
Stickershield (parking stickers, etc)
Dropstop seat gap filler (driver/passenger side)
Door panel removal kit (for speaker kit install)
Two grit guards
Microfiber Drying towel
Microfiber cloths (3 pack)
Car wash shampoo
Wheel brush
Resqme (window breaker/seatbelt cutter)
Wheel cleaner
Microfiber wash mitt
Reindeer costume for Christmas
Headrest coat hanger
Road reflective triangles
Duct tape
Odor eliminator
Tire air pressure gauge
OBDII Scanner (Bluetooth)
First aid kit
Hi, Can i remove swirl marks with this equipment?
Hi,
I have a red 2015 Fiesta ST, I have looked after it quite carefully always following procedure when washing (I dont let anyone else wash my car). It still looks great, to the untrained eye it looks 'new', but as a regular visitor to this sub i can tell it could do with some polishing and general deep cleaning, as there are swirl marks.
I just bought some basic equipment, ie, carnauba wax + new wash mit, tire gel etc...
For polishing, i only bought Autoglym super resin polish, new microfibres and hand applicators, these things - https://www.amazon.co.uk/gp/product/B002PX5H9Y/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Is this enough equipment to help rejuvenate the paint? Should i have got a clay bar?
What technique should i use when applying the polish with the above applicators?
Any advice would be much appreciated.
Thanks
> sta ST, I have looked after it quite carefully always following procedure when washing (I dont let anyone else wash my car). It still looks great, to the untrained eye it looks 'new', but as a regular visitor to this sub i can tell it could do with some polishing and general deep cleaning, as there are swirl marks. I just bought some basic equipment, ie, carnauba wax + new wash mit, tire gel etc... For polishing, i only bought Autoglym super resin polish, new microfibres and hand applicators, these things - https://www.amazon.co.uk/gp/product/B002PX5H9Y/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 Is this enough equipment to help rejuvenate the paint? Should i have got a clay bar? What technique should i use when applying the polish with the above applicators? Any advice would be much appreciated. Thanks
technically speaking yes, there is nothing stopping you but your arm might be exhausted after
Wheels can be the time consuming part, but the most fun.
My set-up for wheels & tires:
Tuf Shine Tire Brush:
This is better than Mother's Tire Brush, just does the job better. Obsessed Garage talked about it, it's bound to be good.
SuperClean Degreaser:
I like this one because the smell isn't as strong as Meguiar's Wheel Brightener, and I can use it for both wheel and tires at once. Scott from Dallas Paint Correction & Auto Detailing recommend this one and it's hard to look back after using it. Buy a small bottle first before buying a gallon to see if you like it.
Wheel Woolies:
I hesitated to spend $50 on these brushes, but after buying them I had no regrets. You don't get the splash back from other wheel brushes.
Black Wash Mitt:
I used to use this one but I find that using a black microfiber mitt for the face of the wheel and in between the spokes made it a lot faster, and you can get behind the spokes too. But that brush is useful for lug nuts though.
Creeper Seat: This is a nice to have if you're working on a flat surface. Nice to have but not a necessity.
Touchless car washes don't do shit to clean your car. I spent about $8 on that useless machine, and there was still a layer of dirt on my front/rear bumper, side skirts, and grill. Best thing to do if you're on a budget is buy one of these [microfiber wash mitt] (http://www.amazon.com/Chemical-Guys-Chenille-Microfiber-Scratch-Free/dp/B003TTL0TE/ref=lp_3020674011_1_2?srs=3020674011&ie=UTF8&qid=1454030316&sr=8-2) and the next time you head over to one of those self service car washes just pre-soak the car and the mit and scrub one panel at a time and rinse off the mitt with the pressure hose.
Edit : If you're not on a budget i would recommend doing the 2 bucket car wash method once a week or so. After about 4-6 months i would clay bar the vehicle and use ONR as a lubricant. There are many sealants out there, but only a few can last nearly 6 months. Chemical guys has some great sealants and waxes, but they have so many that it confuses the shit out of people. Save yourself the hassle and get some Jet Seal, some microfiber applicators and some microfiber towels and you're set.
Edit 2: Here is a list of tested waxes and sealants i found on the interwebs a few weeks back http://www.detailingworld.co.uk/forum/showthread.php?t=85205
These have been shown to have lasted more than 4 months
"Autoglym Extra Gloss Protection
Chemical Guys: M-Seal, Jetseal 109, Speed Amor
Klasse AIO and Sealant Glaze
Hi Temp Paste
Zaino AIO, Z2 and Z5
Wolfgang Deep Gloss Sealant."
I hang out at /r/AutoDetailing a lot also - been keeping cars clean for 50+ years. Here's the destilled version before you wade through what others do. Buy some good car wash soap, I use Meguiar's, it's red in color. I've tried their up-scale one that's yellow, I don't like the film it seems to leave on the car. Buy a good microfiber mitt for the paint, (like this: https://www.amazon.com/Ultimate-Car-Wash-Mitt-Microfiber/dp/B011B25IXY/ref=sr_1_3?ie=UTF8&qid=1487081035&sr=8-3&keywords=microfiber+wash+mitt) and a good large sponge for the tires/wheels. Use the two-bucket method, have two buckets full of soap. When you wash a section, mitt goes first in one bucket, swish it around a bit, then put it in the other bucket to get fresh soap for the next wash section. Leave the wheels for last and DON'T use the mitt, use the sponge for them. Wash the wheels/tires a couple of times, you might need one of these to help (like this: https://www.amazon.com/Viking-862600-Black-Premium-Metal/dp/B0051MYLS4/ref=sr_1_2?ie=UTF8&qid=1487081149&sr=8-2&keywords=microfiber+wheel+brush). When done washing use a waffle weave for drying (like this: https://www.amazon.com/Microfiber-Absorbent-Detailing-Professional-Flawless/dp/B00MA94SOS/ref=sr_1_4?ie=UTF8&qid=1487081214&sr=8-4&keywords=waffle+towel+car). They are amazing at getting the water up and leaving your car streak free. When drying, start with the windows first.
As an experiment, I decided to try using sponges as an alternative (cheaper, maybe better?) grow medium, instead of rock-wool or grow-plugs. This is 1-week after starting new seedlings using sponges as the grow medium. Net-pots are 2-inches for scale. Most everything has sprouted, except some of the peppers which typically take longer.
The only seedlings which seem to have problems is tomato seedlings, which seemed to push themselves out of the sponge. The only other thing worth note is that it might be good to cut the tops of the sponges more than I did, so that seedlings can escape better.
Any sponge should work. I used these due to price.
I'll probably update at around 1-month, 3 months, etc regarding any issues I might face.
edit: The plants, with their locations....
|Plant|Sprouted|Column/Row|
|---|---|---|
|Fatalli Pepper|(none)|C1, R 1-2|
|Delictica Squash|3/8 sprouted, 2in high|C1, R 3-4|
|Trinidad Sweet cherry Pepper | (none) | C2, R 1-2 |
|Numex Suave Orange Pepper |2/6 sprouted | C2, R 3-4 |
|Trinidad Perfume Pepper | 1/6 sprouted | C3, R 1-2 |
|Large Leaf Sorrel |8 sprouted | C3, R 3|
|Cardamon|0/1 |C3, R4 |
|Broad Leaf Sage |1 sprouted (of ~12?) |C4, R1-2|
|Sweet Cicely |none |C4, R3 |
|Catnip| 0 / ~15 surprisingly | C4, R4|
|Bachelor's Buttons |8 sprouted |C5, R1|
|Pink Sunday Clary Sage |5 Sprouted |C5, R2 |
|Bee Balm |4 sprouted |C5, R3 |
|Caraway |0 (bad seeds?) |C5, R4 |
|Szechuan 'Buzz' buttons|2 / 15 sprouted|C6, R1-3 |
|Kiwi |0/8 |C6, R4 |
|Lemon Cumber|1/3 |C7, R3 |
|Sweet Million Tomatoes |3/4 sprouted |C7, R4 |
edit: Also worthy of note, the sprouts have been sitting on top of my grow-tent, which is 85-degrees at the top when the lights are on. I just moved them into the grow tent, so they can get some light.
My parents' neighbor has been watching as I borrow Mom and Dad's hose and he recently asked if I could take on his car and I was happy to oblige! Overall, the exterior was in okay shape - couple bugs, a few spots of tree sap and bird poo, as well as just a good amount of dirt and mud tucked in some spaces. I gave the car a two bucket wash,
clay, Iron X treatment,Iron X, clay and topped it off with a sealant. Thanks for pointing out that I listed my procedure out of order, /u/Deadfable! Here's the deets:Products Used:
0000 Steel Wool from Home Depot (used with QD for the exhaust tips)
Overall a fun job! Got rewarded with a hearty lunch of sausage and peppers on Italian bread. Happy detailer!!
Ok so there are three 2015 and newer cars in my family and we all make sure they are always looking their best
1)I, the one who is investing and discovering the joy on detailing cars, would like to ask if there are any products i can buy in concentrates that will last me a life time such as Quick Detailers, Interior cleaner, tire, spray quick wax and wheel cleaners ETC? I see so many products in the wiki its kind of over whelming. I currently only have to last me a while for my car (Megs OTC recommended kit)
2) My Car, 2016 Mazda 3 5-door SGT, has a crap load of leather and soft interior. I kinda bit off more than i can chew in terms of maintenance. Is there and interior cleaner i can use for everything (currently have Megs Quik Interior Detailer) including the leather?
3) Are these any good? [These applicators from TCG] (https://www.amazon.com/Chemical-Guys-MIC_292_08-Microfiber-Applicators/dp/B00BTGSGFK/ref=pd_cart_pd_ecc_rvi_cart_2_2?ie=UTF8&refRID=19GM4RBQY3NSV7336751&th=1) seem to be on sale. should i stock up?
Most of the clay out there is very similar, but there are different grades of clay (read: aggressiveness). Nanoskin is great for the "average Joe" who has a reasonably clean car but needs to decontaminate it, and clay is great for a 100% decontamination job like a very dirty or neglected car.
If you're new to claying... I'd suggest getting this kit, or something similar. It has everything you need as a beginner. I used these all the time when I first started detailing. I finally needed more so I bought in bulk and gallons of lube at a time.
The second thing I'd recommend is getting a small, fine nanoskin sponge. You can try it without dropping $45 for a mitt or pad and see if you like it and the results you get when working with it.
Get a Megs105 or Ultimate Polish (since its a beater I expect the paint is in need of compounding) $10
If you don't want to compound maybe a wax cleaner, its milder, cheaper and you could probably 1-step your car with it but don't put your expectations high because it only removes mild oxidation and some swirls. $7
If you need a backing plate, go get a 5 inch one $10, you need it
Get an CCS Orange Pad from lake (8-10)
Meguires Gold Class Wax on Target/walmart/amazon $10
I almost forgot but you need to clay before you start the magic and the cheapest one and most awarding one I know is this that's like $11.
Invest a few more dollars and if you want your money back you could always clean your friends car for a few bucks.
Awesome job man and beautiful Rex! I picked up a 14 about 2 weeks ago. I was wondering, how do you apply the Blacklight and the detailer? I see these on Amazon, would they be good? I'm new to detailing. Just wanted a quick tip :)
http://www.amazon.com/Chemical-Guys-Premium-Microfiber-Applicators/dp/B00BTGSGFK/ref=pd_sim_auto_2?ie=UTF8&refRID=18KSY6J0SCEKA3C6W8RK
I'm fairly new, myself. I've driven clunkers most of my life. Spent about five years downtown where I didn't have a car. Now I'm back in suburbia, so I've got a brand new GTI, and it's the first one I've ever cared to take good care of. Here's what I started with:
I should have picked up some of Chemical Guys' citrus wash and clear, too, to help deal with a winter's worth of grime left by terrible touchless car washes. I've also got a tire brush, hand vacuum, and some assorted cheap microfiber towels around already.
Your kit looks a lot more cost-effective, though. Throw in some cheap buckets, grit guards, wash mitts, and drying towel, and an extra stack of cheap microfibers and you're still under $100 for practically everything you would need for a proper two-bucket wash and wax.
Only hand wash, all the time, lovingly, with microfiber everything. It's going to be your new hobby, and on a car this size, takes less time than you would think to do it right.
Here is my amazon list, a lot of stuff has subscribe and save deals, everything Chemical Guys has been top notch.
http://www.amazon.com/Chemical-Guys-MIC_493-Microfiber-Scratch-Free/dp/B003TTL0TE/ref=sr_1_10?ie=UTF8&qid=1465225930&sr=8-10&keywords=chemical+guys
http://www.amazon.com/303-30520-Convertible-Fabric-Cleaning/dp/B000A8JNF0/ref=sr_1_1?ie=UTF8&qid=1465226066&sr=8-1&keywords=303+aerospace+protectant+convertible
http://www.amazon.com/Chemical-Guys-MIC_506_12-Professional-Microfiber/dp/B00A8MZ7IA/ref=sr_1_3?ie=UTF8&qid=1465225930&sr=8-3&keywords=chemical+guys
http://www.amazon.com/Chemical-Guys-CWS_301-Citrus-Concentrated/dp/B004K9KETY/ref=sr_1_6?ie=UTF8&qid=1465225930&sr=8-6&keywords=chemical+guys
http://www.amazon.com/Collinite-Liquid-Insulator-Wax-845/dp/B000JK2D06/ref=sr_1_1?ie=UTF8&qid=1465225985&sr=8-1&keywords=collinite+insulator+wax OR http://www.amazon.com/Collinite-No-Super-Doublecoat-Auto/dp/B000AP8DZY/ref=pd_sbs_263_5?ie=UTF8&dpID=51Nde%2B7iakL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0KRY8VA4QS2RZE3XG1R5
http://www.amazon.com/Viking-862400-Blue-Microfiber-Applicator/dp/B0051MYL8E/ref=sr_1_2?ie=UTF8&qid=1465226014&sr=8-2&keywords=microfiber+applicator
http://www.amazon.com/Chemical-Guys-TVD_109_16-Sprayable-Dressing/dp/B001TI1F5Q/ref=sr_1_3?ie=UTF8&qid=1465226032&sr=8-3&keywords=chemical+guys+tire+shine
http://www.amazon.com/Mothers-155700-Wheel-Brush/dp/B001GJ3DZS/ref=sr_1_1?ie=UTF8&qid=1465226178&sr=8-1&keywords=tire+brush
I enjoy Collinite 845, Optimum soap, drying aid, for my dash, doors interior, and vinyl on the outside , wash mitt , drying towel , interior and exterior microfibers great for buffing wax and dust on the interior. And if you want that shine and to keep the integrity of your clear coat I would wax every couple months, depending the quality of the wax you decide to go with.
For pure ease of use, I'd recommend this. It's a clay alternative that is very easy to use.
Nanoskin (AS-018) AutoScrub Medium Grade Sponge https://www.amazon.com/dp/B00CUAWEUM/ref=cm_sw_r_cp_apa_i_5TRPCbY0T67MR
Make sure to use a lot of lube (I prefer Optimum No Rinse for just about everything. Car wash, instant detailer, ultra diluted for interior cleaning and glass, less diluted as clay lube).
Also, make sure your panels are cool, which you should be doing for any wash if you can help it.
All you need is 2 buckets and a good wash mitt/drying mf towel and good soap.
Use the power washer and hose at the self wash. Done.
I recommend upgrading to a better wash mitt and drying MF over time.
Looks like you have a good list! I would suggest a couple changes though.
Meguiars supreme shine microfiber: I would recommend getting this instead. I would also recommend getting cheap microfiber for everything other than your paint. Like these.
I bought the Meguiar's microfiber wash mitt and I am really unhappy with it. Since it's microfiber, it grabs onto the dirt and puts scratches into the paint. I would recommend either the lambswool mitt or the wookie mitt.
Awesome! You definitely helped. One final question if it's ok. Will the following steps (in order) be good for a first time wash/detail?
(https://www.amazon.com/gp/product/B00CUAWJ6G/ref=ox_sc_act_title_6?ie=UTF8&psc=1&smid=ATVPDKIKX0DER), while using this as the lube for it?
Awesome! Thank you for the help.
For the Carpro Perl. Am i suppose to dilute it? Also for appying it do you recommend oine of these to apply it 1 2 3
I'm thinking #1 for applying the wax and #2 for the plastic trim.
id drop the creme glaze and get a wax instead (if budget is a problem?). meguiars gold class wax is a cheap but very effective wax.
youll need about 3 cutting pads, 3 polishing pads, and 2 wax/sealant pads.
32 oz of compound and polish is a lot. if budget is a problem, you can do a lot of cars with the 8 oz bottles.
you might want to consider getting just the nanoskin sponge instead of the mitt and a regular microfiber wash mitt. it will be cheaper and you dont need to clay every wash.
ONR is good, but since you can use soapy water as a lube with the nanoskin, you might want to just get a good quick detailer instead. it helps with drying the car too.
Sure
This is the one I currently use: Chemical Guys MIC_493 Chenille Microfiber Premium Scratch-Free Wash Mitt https://www.amazon.com/dp/B003TTL0TE/ref=cm_sw_r_cp_apa_0tgFxb1M1HBR5
Literally the only CG product I own. I like that it's green so I can see the dirt. However here is one that is highly rated, but is blue, but if you don't mind that these ones seem good too, especially if you have a large vehicle. Plus you can dedicate one to the upper and lower half or however
Ultimate Car Wash Mitt - 2 pack Extra Large Size - Premium Chenille Microfiber Wash Mitt - Wash Glove - Lint Free - Scratch Free https://www.amazon.com/dp/B011B25IXY/ref=cm_sw_r_cp_apa_0vgFxbQ8H8HA9
I don't do a ton of hand-dying anymore, but when I do I always use Eco-Flo Waterstain. I tried quite a few other dyes including Fiebings, and I really didn't like the results. The waterstain goes on really evenly (as long as you work quickly) and gives a deep, rich colour.
I don't believe there is a difference between "professional" or not. I think it's just the branding.
As for application, I buy bulk packs of firm sponges and cut them into 3" cubes, roughly. They work better than any clothes I've used. Make sure they are the plain, soft ones kinda like this and not the scrubby kind.
I agree with everyone that it's rail dust, or just iron particulates that get embedded in to your clear coat. initial removal will take care of most of it, but know that with a white vehicle, it'll show up occasionally, even with waxing.
Instead of plain clay bar, I'd recommend getting a nano-skin. works like clay bar, but much easier to use (you can drop it and simply rinse it off). I just use any quick detail spray as a lube.
nanoskin
I love Larry's videos from AMMO NYC & DRIVE Clean and have always followed his recommendations for detailing/washing.
Go to Amazon and order this (I like Meg's products),
This should run you about $345 for everything and have you setup to take care of your car for a long time. You can find a 20% discount code online for harbor freight to bring the price down $55 for the DA. Go to home depot and buy a couple buckets and you will be good to go.
Edit: To add, I went to Lowes and bought a cheap inline sprayer for my hose and it works fine for foaming up the vehicle, plus it only costs $5.
Edit2: If you are going to downvote me please post why you don't like my recommendation.
The next step up is to try a microfiber bug sponge, it's a little more scraping power but still pretty gentle.
I got one of these and it's not bad: https://www.amazon.com/dp/B001GJ7HCI
I just got mine Wednesday; super easy to setup if you can follow instructions. Utilize all the tools they give you, even the filter wrench and plumbers tape.
Overall impression:
Holy crap, why did I not buy one of these sooner?! Absolutely no water spots washing in 80 degree weather letting it air dry. I was even able to clay my car while I wash panel by panel, then rinse away. Normally 30+ minute wash and clay (when I have to clay) turns into a 15 minute wash while I clay. I can't even imagine how easy it will be once I have my car dialed in with wax and just doing upkeep washes. Tip: buy chemical guys bear claw wash mitt, this thing is a beast.
Link : Chemical Guys ACC145 Bear Claw Scratch Free Premium Wash Pad https://www.amazon.com/dp/B01IRJ2S4G/ref=cm_sw_r_cp_apa_HBkkzbBSMXQVM
Hi There.
We recommend the MicroCareful Wash Mitt from RouteGurus because they come with a FREE microfiber waffle weave dry towel and FREE dusting and waxing mini microfiber mitt.
It-s a One-In-All Kit at the lowest cost possible.
You can get one or find out more on Amazon: https://www.amazon.com/dp/B00OHYPFV4
If you wanna keep it under $30 and want a very basic method of keeping your car clean then I would recommend the tried and true 2-Bucket Wash method.
TOTAL: $45ish
I know that $45 is over your budget of $30, but I highly recommend using the 2-bucket wash method. You can get away with using 1 grit guard and 1 wash mitt if you want to cut a little bit on cost. You could also buy a smaller size of car wash shampoo... this may get you closer to budget.
The reason I buy 2 grit guards is to use 1 in each bucket. You can buy only 1 and use it in the rinse water bucket for when you rinse your mitt.
You can also get away with having 1 wash mitt and look at different brands. I personally use 2 (one for upper half, one for lower half) to reduce contamination.
---
If you want to expand later on to go beyond cleaning the car... then you can put some money into additional products. You will want to look into wheel brushes, all-purpose cleaner, glass cleaners, detail sprays, waxes, etc.
Once you start, you cannot stop!
Are you using a sponge, brush, or something else? I’ve had best luck with an automotive wash mitt like this.
Never knew about the clay towel; nice tip. The Nanoskin sponges are great. Links below for those curious.
Sponge:
https://www.amazon.com/Nanoskin-AS-018-AutoScrub-Medium-Sponge/dp/B00CUAWEUM/ref=sr_1_5?ie=UTF8&qid=1496785409&sr=8-5&keywords=nanoskin+sponge
Towel:
https://www.amazon.com/ABN-Grade-Towel-Detailing-Cloth/dp/B00Y1OBG8Q/ref=sr_1_3?ie=UTF8&qid=1496785236&sr=8-3&keywords=clay+towel
Soap
Interior Cleaner
Foam Cannon
Scratch Free Wash Mitt
I'm really enjoying what chemical guys has to offer in their cleaning line up. I'm going to pick up hydro charge from them soon. It's a spray on ceramic coating.
The chamois and quick detailer help to remove grime, oil spots or whatever they are. It's very apparent on a white car. but glad I can actually see it too remove it versus another color car.
​
cc: u/simply_lime
Hello!
So I've been lurking here for several weeks trying to soak up what I can. I've checked out the wiki page on starter kits and I guess I'm just wondering a couple things based on the list to get myself going.
Gonna get the buckets and the grit guards. I've got a ton of microfibers I use for my car already.
I was thinking of getting the Griot's DA polisher recommended (here)[https://www.amazon.com/Griots-Garage-10813STDCRD-Orbital-Polisher/dp/B009UKUUWE/ref=as_li_ss_tl?s=automotive&ie=UTF8&qid=1462198536&sr=1-1&keywords=griots+da+polisher&linkCode=ll1&linkId=3a68733089f6c8d0f136c31b5c3bb8d1]
I guess I'm wondering what chemicals I should be using on my vehicle?
I do live in an apartment complex though so I DO NOT have access to a hose because our landlord has got it under lock and key. I read a few days ago about a product that someone used outside and it was still ok (though I do have access to a garage!).
I guess I'm just more lost as to where to start besides the DA polisher.
edit: Oh! I've used a clay bar before and while it was nice, I was wondering about this nanoskin sponge that's also recommended.
https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=as_li_ss_tl?s=automotive&ie=UTF8&qid=1462198361&sr=1-1&keywords=nanoskin&linkCode=ll1&linkId=4c532041fcdbfa6b35f768083c70423e
Is that like a 1:1 sub for clay bars? Same thing just not wasted if dropped?
I've been using something like this. It's a wonderful pad, highly recommend it.
Chapin pump sprayer from Walmart is $5. ONR is $55 for one gallon on amazon (wash+wax instead of just wash), which is good for ~200 washes (more or less depending on your dilution and use). Big microfiber towels are $6 for 3 on AmazonBasics. The mitt for washing on AmazonBasics is $5ish. China washing mitts are too small for European hands, but they are less than $1 each. I went with AmazonBasics for the mitt. Grit guard from china is ~$6 each -- get the smaller diameter, 23cm vs 26cm, one so you know it fits for sure. Get buckets from Lowes or Home Depot for $5 each. When you read China, read 30 days for shipping.
If you experience bird poop or something like that, like salt or big bugs, go to a self-service car wash where you can power wash off the crap before ONR. Or just do a touchess carwash before ONR for about $7 a wash, which is the most basic wash at my local touchess carwash.
[Nanoskin Mitt] (http://www.amazon.com/Nanoskin-AS-016-AutoScrub-Fine-Grade/dp/B00DOS0LH2/ref=sr_1_3?ie=UTF8&qid=1422296825&sr=8-3&keywords=nanoskin)
There is also a medium grade sponge that is smaller but works really well, as well as a combo pack that has medium and fine grade together.
Note that you shouldn't use this as a standard 'wash mitt' though. It is literally a substitute for a clay bar.
Definitely:
There’s a mothers I use, I’m on my third one. When yo I first get it rinse it to get all loose hairs off. I’ve had it for 2 years. I buy them every 2-3 years just to make sure they’re clean, even though I use good practice. I know there’s a chemical guys that’s cheaper but I’ve never used it so I can’t comment on it. This one works for me. I like the shorter hairs, they don’t get caught in things. Once they go bad I recycle them by using them for dirty sections like lower sills, rear quarters etc... perhaps buying the chem guys for that would work too.
When I’m done washing it, I lay it on my clean grit guard and power wash both sides, then squeeze the shit out of it, and then hang it on a hook in my garage to air dry. Don’t leave it to dry in your bucket, it’ll smell like ripe ass, I promise. It’ll get hard when it dries so toss it in when you’re filling your wash buckets and let it soften up.
mothers mitt
The Rag Company has a green and blue set on Amazon that I love to use. For the price, they perform amazingly well and have lasted me months
-
(2-Pack) THE RAG COMPANY Premium Soft Microfiber Chenille Knobby SCRATCH-FREE, LINT-FREE Wash Mitts, One Royal Blue and One Lime Green https://www.amazon.com/dp/B00R54ULN0/ref=cm_sw_r_other_awd_QAD-wbJ18XVTF
It is an 05. Paint is in decent condition but a lot of contamination. It was sitting under a sap tree for 2 years. I spent about an hour claying the hood and it removed maybe 70% but there was a lot of stuff. I was using chemical guys clay.
Thank you..glad you said something :)
Like this
I believe clay bar qualities are different. Just like with most stuff, generally the higher the quality, the more expensive it is. The cheaper ones I've worked with have streaked heavily and more often. Depending on the vehicles condition, and how often you detail, a clay bar can last a long time. This CLAYBAR is pretty cheap & plenty of people like it. For a clay sponge it does the job.
ARGH! HEY HEY, READ THIS!
GET THIS NOW!
ok, quick learning time. Subaru paint is terrible, very thin, and not durable. Bug blood is acidic and will eat the clear coat off and then go after the paint, i know first hand. Spray that shit on the bumper, let it sit, then use a bug sponge to clean it and wash it. There's a lot of wax in it and it'll clog up your sponge but it's either that or paint job. I did los angeles to denver, long way, and tried to see how dirty i could get it and I'm paying for that now. My car is no garage queen but the bumper can strike the eye with a dull thud now :( do this every other day, it's only a few minutes and you're protected. Something about the way you look in this photo instills me with confidence, take the time to wax the entire front end, that will protect even better so all you do is rinse and light wash and all buggies go bye bye.
Here are the videos i watched months ago, hooe they help.
1
2
Cannot find the other.
Sure thing! $18 on Amazon. Here you go:
https://www.amazon.com/dp/B01DKC6IY6/ref=cm_sw_r_cp_api_i_MWRaBbN5EZXP7
And I used Meguiar’s Gold Class soap, $10 for a gallon at Advance Auto. And I picked up four (2 2-packs) of these in X-Large size (having 4 is nice because you clean one section of the car with one, then grab a brand new one for the next section of car, no rinsing required):
https://www.amazon.com/dp/B011B25IXY/ref=cm_sw_r_cp_api_i_iYRaBb1CG00GR
And lastly, a 9-pack of these:
https://www.amazon.com/dp/B00S1U5TWA?ref=yo_pop_ma_swf
Oh, and a wheel brush:
https://www.amazon.com/dp/B001GJ3DZS?ref=yo_pop_ma_swf
So my first ever detail is planned out like is this
My understanding is polish basically scrapes a layer off in order to go deep, is there anything i need to "refill" that digging?
Does my order of detailing sound good, in other words do i need to add anything else?
I'd go with this much more economical size:
https://smile.amazon.com/Optimum-NR2010Q-Rinse-Wash-Shine/dp/B00D8DR0AO/
I haven't used the chemical guys version, but ONR seems to be loved by detailer nerds the most out of any of the products.
I use a meguiar's microfiber wash mitt or the ONR sponge make ( https://smile.amazon.com/Optimum-22516-Big-Wash-Sponge/dp/B078DPCYFV )
One bucket method if car isn't that dirty. If really dirty, I'd use two. I do full washes about 60% of the time because my ceramic coating has degraded down to where a lot of dirt remains behind if I drive through rain and I like using my power washer. When I do that I use the same wash mitt or red sponge. The wash mitt is much easier to clean (laundry) than the big red sponge (hand wash usually), but the big red sponge is maybe a bit more mar preventative.
I used to use those microfiber circular applicator pads but didn't like them. No where to really grip it from and it just felt awkward using it. And then I found the microfiber blocks and they made the job MUCH easier. Bigger coverage as well as a place for your hands to hold. I'd recommend these over the circle pads any day.
https://www.amazon.com/gp/product/B00BTGSGFK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Don't use just water.
You can pickup blue ONR https://www.amazon.com/Optimum-NR2010Q-Rinse-Wash-Shine/dp/B00D8DR0AO/ref=sr_1_1?ie=UTF8&qid=1510851008&sr=8-1&keywords=optimum+no+rinse which you can use as clay lube, detailer, rinseless wash depending on the dilution with your distilled water.
Clay lube: ratio 1:64 or 2 oz/1 gallon
Those types of clay do the job and some people perfer it to traditional clay. I haven't heard of that brand, but i'm sure its the same stuff. I personally have little sponge from Nanoskin. https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=sr_1_3?ie=UTF8&qid=1510851254&sr=8-3&keywords=nanoskin
I like this better than that "towel" since this has a nice grip.
Well I've just started getting together my own kit and felt I HAD to get these:
I still feel like there are atleast ten other products that I NEED!
-Pressure Washer
-Foam Cannon
-Detailing brushes
-Sealants/Compounds combined with a proper rotor drill
-ETC
Thank you for all the feedback and tips! Is this what you were referencing to?
Also that is hilarious, how was cleaning my car compared to other cars?
i use Amazon.com: Nanoskin (AS-019) AutoScrub Fine Grade Sponge and as lube some shampoo diluted in water. does an amazing job and quite quick!
And just think, some of the suds dripped off BEFORE I got this shot. Here are the links to the Foam Gun/Cannon and the soap:
Foam Gun/Cannon
Soap - Chemical Guys Honeydew Snow Foam
I also grabbed the mitt that was offered with it from Amazon.
I added some soap to the canister with the water to dilute it. I just poured in what I thought was good. My pressure washer is a gas powered Troy from Lowes rated at 2900 PSI.
Hope this helps you out.
I personally have only used the Nanoskin sponge to decontaminate my car. It's a highly recommended clay alternative.
As for a sealant/wax, I'm not sure if my recommendations will be of any use since I just started detailing my own car over the last ~6 months. I have only tried one wax (Meguiar's Ultimate Liquid Wax) and one sealant (Opti-Seal). Longevity of the Ultimate Liquid Wax wasn't great IMO. I'd look into Collinite 845 since it's highly regarded and there are plenty of tips/tricks on how to use it.
Honestly, easiest solution may be go to with CarPro Essence or HD Speed. I don't think there are any special tips/tricks on how to use Essence or HD Speed, and both will allow you to polish and seal your paint in one step. Admittedly, I haven't looked into either much, but they are next in line for me to research.
I have three that I alternate between, and I like all three of them equally. I actually think 2 of the 3 are identical.
TheRagCompany - http://www.theragcompany.com/knobby-microfiber-chenille-mitt/
Autopia-Car Care - http://www.autopia-carcare.com/super-plush-wash-mitt.html
Chemical Guys - http://amzn.com/B003TTL0TE
Sounds like you need a clay bar. Or my favorite, a Nanoskin sponge.
https://www.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G/ref=sr_1_1?ie=UTF8&qid=1503197119&sr=8-1&keywords=nanoskin
That's what I use. Works great.
I use a sponge that is exactly like this one;
https://www.amazon.com/Griots-Garage-11205-Detail-Sponge/dp/B003POIYJM/
I "prep" by simply washing the vehicle, wheels and tires are the last step I do so using a wool mitt I'll just scrub the tires with it. I have applicator bottle filled and just squirt on the sponge and wipe it on like I would any other tire product.
I was actually looking into getting the Nanoskin version of this and I am so scared of it instilling swirls into my paint. Somebody please help me make a decision, I need some pros / cons.
Did you not decontaminate the paint with clay or alternative??!
Oh boy. Your paint is supposed to feel VERY smooth after a wash, clay, and wax. Here's a review of a nanoskin sponge which is 100% worth it I wrote. My car feels so smooth it's ridiculous.
http://www.amazon.com/gp/aw/d/B00CUAWJ6G/
http://www.reddit.com/r/AutoDetailing/comments/2bjc99/the_best_10_ive_spent_detailing_nanoskin/
Not decontaminating your paint also results in you rubbing abrasive particles into your clear coat and swirling it.
Here's my advice-
I dunno how well dryer sheets actually work, but something like this is actually made for the job.
I guess this wash mit is pretty Awwdorable .... ish?
So … I have a TD-6 that's over ten years old. I was having trouble with the triggers not firing. Pulled the heads off, and yeah, the cones are squashed. I did the same searches I'm sure you're doing. Official cones are about the price you've found. Don't try contacting Roland directly - they won't respond.
I fixed my kit myself, for a couple bucks.
Go buy one or two of the thick yellow sponges meant for cleaning your car - like this one, thought I bet you could find even cheaper. Cut it to shape, maybe just a little too tall to ensure the head holds it down. Use double-stick tape to stick it to the piezo.
I have no idea how long this will hold up, since my practice is rather sporadic recently. But, it got the triggers firing nicely.
Can you feel anything when you move your fingers over it? It may be worth asking r/AutoDetailing. Another option is to use a nanoskin which works like a clay bar.
When using a clay bar alternative like this, do you apply it the same as you would a clay bar? Wet the surface with an auto detailing spray, then gently pass back and forth with the bar until it slides smoothly?
I'm not sure what barrels are on wheels, but I clean my wheels with this.
One other thing - I would do a hand wash versus a pressure wash only. I love self-service car washes for maintenance but they don't remove stuck-on dirt and grime that you'd want off before claying or applying sealant. Also ONR assumes the use of a wash medium like a wash mitt. If resources are an issue I'd just pick up a cheap MF wash mitt, a $4 bucket from Home Depot, and maybe a grit guard.That + ONR should be plenty. If your self-service car wash won't bother you about bucket use I just put in $1 and go straight to pressure soap to blast most of the dirt, then fill the bucket with water + ONR and dry with a MF towel. I'd also try to do as much as I can in one place since the drive home would introduce a bit of new dirt.
If this seems like too much of a hassle, I'd say just hand-wash with ONRWW + MF towel-dry at the car wash and you're set and waxed with protection until you can find a place to do a hand wash, dry, and seal in one place. I do it in my apartment's stacked garage, personally.
Save your money, just get this and this instead and start washing. You'll find out what else you want/need as you go.
Yes you can use that one, I actually have this one. I bought a two pack in case something happens with one so I'll have one on hand.
The interior was easy. Vacuum, wiped down with Nextzett Cockpit Premium, and dressed some parts with 303. The only bad thing was I was vacuuming in the sun, so it was hot af. The paint had oxidation, but the owner didn't have much time so I only washed it and sealed it with Sonax Polymer Net Shield.
Sure!
Foam Applicator 1
Foam Applicator 2
Microfiber Applicator these also come in packs of two
What I used:
Mothers Microfiber Performance Drying Towel.
AmazonBasics Microfiber Cleaning Cloth, (Pack of 24).
Chemical Guys MIC_701_01 - Glass and Window Waffle Weave Towel.
Stoner 92164 Invisible Glass for Window, Windshield and Mirror Cleaner.
Rain-X 800002243 Glass Treatment.
Griot's Garage 10268 Micro Fiber Wash Mitt.
Optimum (NR2010Q) No Rinse Wash & Shine.
Eagle One 665854 All Wheel and Tire Cleaner.
Mothers Wheel Brush.
Mothers 10324 Reflections Tire Care.
Chemical Guys ACC_300_2 - Durafoam Contoured Large Tire Dressing Applicator Pad.
Meguiar's G14422 Ultimate Quik Detailer.
303 Products 30350 Aerospace Protectant.
Black & Decker CHV1510 Dustbuster 15.6-Volt Cordless Cyclonic Hand Vacuum.
(I live in an apartment complex... otherwise I'd probably get a shop vac).
Two 5 gallon buckets.
2 of The Grit Guard Inserts.
Most people I have seen use this method say it works great. But some say it causes micro-scratches in the glass. ¯\_(ツ)_/¯ I Just avoid it all together and use my Medium Nanoskin Sponge.
I have this, which you can use with this stuff or any other ONR product really and keep them with you. Just spray it on, let sit for a few seconds, and use the bug sponge to wipe off. Should come off easy.
For bug removal, I highly recommend these products:
https://www.turtlewax.com/en-us/our-products/renew-restore/turtle-wax-bug-tar-remover/
https://smile.amazon.com/Viking-845100-Car-Care-Cleaning/dp/B001GJ7HCI/
They are super generic but this is the style I prefer which is a sponge and a microfiber mesh on the outside. Coincidentally I bought one at home depot yesterday for under 2 bucks
https://www.amazon.com/Viking-845100-Microfiber-Sponge-Colors/dp/B001GJ7HCI
I have quite a process now for this car.
I use the 2 bucket method with the following:
My Process
Extra stuff:
At first this took me almost 2 hours to wash my car, but after doing it every other week I'm now down to only an hour. It's extreme but it's detailed and allows me to also check if there are any rock chips, which I can then cover with some touch up paint.
Nanoskin Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G/ref=cm_sw_r_awd_6.eWub0G5AWXB Sorry for long link on mobile. I only use these now. I do think you need to use more lube with these then normal clay but it last longer. If you drop it just rinse it thoroughly and ready to go again.
How sticky/tacky should my nanoskin sponge be? After doing the recommended break-in, I never got the white or foam/bubbles they described and it is definitely not tacky. At the edges of the rubber, it sticks a little, but the overall face of it never changed.
wax for the interior? I was thinking of the 3m style spray on plastic stuff that I assumed was used on the seats and other surfaces to prevent dust buildup.
The brush is the Nanoskin (AS-019) AutoScrub Fine Grade Sponge http://amzn.com/B00CUAWJ6G
obviously should have called it a sponge!
Soapy water + big loofa e.g. https://www.amazon.com/dp/B003TTL0TE/ works reasonably well without having to take it apart.
I use the following wash mitt can confirm it works well. Haven’t observed any swirl marks as of yet.
I apply 303 with these. They are great. Interior towels honestly aren't as important as exterior towels. Simply because you are much less likely to scratch anything on the interior, versus paint. I buy the Costco yellows and use them on the interior, exterior and simply degrade from: paint to interior, jambs, tires, wheels, trash as they get dirty.
Sure, here's everything...
Spotless water system:
https://www.autogeek.net/cr-spotless-water-systems.html?utm_campaign=8008446&utm_source=google&utm_medium=cpc&utm_content=201591135968&utm_term=cr%20spotless&gclid=CjwKCAjwqfDlBRBDEiwAigXUaEk4pHWhh9zjMsvhRa1Z6l3EDMUboth8Z32WUsxP2YX64rWOXEucNxoCm50QAvD_BwE
Air Dryer:
https://www.amazon.com/gp/aw/d/B01B79BD6C?psc=1&ref=ppx_pop_mob_b_asin_title
Wash Mits:
https://www.amazon.com/gp/aw/d/B00R54ULN0?psc=1&ref=ppx_pop_mob_b_asin_title
Grit Guards:
https://www.amazon.com/gp/aw/d/B07KR6KGQ6?psc=1&ref=ppx_pop_mob_b_asin_title
Pressure Washer:
https://www.amazon.com/gp/aw/d/B00LX8Z03K/ref=ppx_yo_mob_b_old_o1_img?ie=UTF8&psc=1
Ryobi wand. https://www.amazon.com/dp/B00QMKHNM0/ref=cm_sw_r_cp_api_i_nN08Ab1AVTA48
Foam cannon. https://www.amazon.com/dp/B0798NQTQS/ref=cm_sw_r_cp_api_i_.N08AbJNV28Y7
Home Depot buckets. https://www.homedepot.com/p/The-Home-Depot-5-Gal-Homer-Bucket-05GLHD2/100087613
Wash mitt. https://www.amazon.com/dp/B003TTL0TE/ref=cm_sw_r_cp_api_i_IQ08Ab8VGZPNJ
Soap. https://www.amazon.com/dp/B00AFBXQNC/ref=cm_sw_r_cp_api_i_dS08AbSYF7T4H
Pressure washer. https://m.harborfreight.com/1750-psi-13-electric-pressure-washer-63255.html
Micro fiber rags/towel can be had at AutoZone or O'Reilly's. I suggest getting a pack with multiple colors and dedicate a color to windows, front of the car, above the belt line and below the belt line. Then a big microfiber drying towel or two. Somewhere around $20 for all that depending on where you go.
Also check out r/harborfreight for a coupon. 20% are pretty common.
Soap is lubrication it helps the dirt glide over the paint, where as if you had no soap you would just be pushing the dirt into the paint causing scratches. Also sponges are bad use a chenille wash mitt like this one
https://www.amazon.com/gp/aw/d/B003TTL0TE/ref=mp_s_a_1_1?ie=UTF8&qid=1485112376&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=chemical+guys+wash+mitt&dpPl=1&dpID=5133hxCtSML&ref=plSrch
If you need any other advice I'd be happy to help
Unless you specially needclay, go with Nanoskin (AS-019) AutoScrub Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G/ref=cm_sw_r_cp_api_i_SEotDbSTMY8MQ
MF mit.. no brillo or bounty towels :)
Don't recommend using RainX on your front windshield - it makes the wipers squeak something fierce.
Use a wash mitt to reduce chance of scratching.
https://www.amazon.com/Microfiber-Cleaning-Absorbent-Detailing-green/dp/B00MQM0KB4
https://www.amazon.com/gp/aw/d/B003TTL0TE/ref=psdcmw_15718691_t2_B00MQM0KB4
https://www.amazon.com/gp/aw/d/B00BQYCKE8/ref=psdcmw_15718691_t1_B00MQM0KB4
https://www.amazon.com/gp/aw/d/B0128S0FS8/ref=mp_s_a_1_5?ie=UTF8&qid=1491827279&sr=8-5&refinements=p_72%3A2661618011&pi=AC_SX236_SY340_QL65&keywords=clay+bar
And a M3 wax that I found on a local supermarket.
Why not get a few of these? https://www.amazon.com/Ultimate-Car-Wash-Mitt-Microfiber/dp/B011B25IXY/ref=sr_1_2?ie=UTF8&qid=1496868503&sr=8-2&keywords=microfiber+wash+mitt
Wash: https://smile.amazon.com/Meguiars-Hyper-Wash-Foaming-Leaves-D11001/dp/B0006SH4IM
Clay: https://smile.amazon.com/Nanoskin-AS-019-AutoScrub-Grade-Sponge/dp/B00CUAWJ6G
Decontamination: https://www.autogeek.net/carpro-iron-x-cleaner.html
DA: https://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-69924.html
Polish: https://smile.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B003LMGDHI
Compound: https://smile.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B003LMGDHI
Pads: https://smile.amazon.com/dp/B004104678/ref=twister_B00NN89SGI?_encoding=UTF8&psc=1
Coating and Sealant: https://www.autogeek.net/cquartz-uk-edition.html
Chemical Guys microfiber wash mitt for ~$6 on Amazon
Amazon/Ebay!
MUCH cheaper prices than buying it locally.
Grit guard;
https://www.ebay.com/sch/i.html?_from=R40&_nkw=grit+guard&_sacat=0&LH_PrefLoc=1&_sop=15
​
Wash Mitts;
https://www.amazon.com/dp/B011B25IXY/ref=sspa_dk_detail_6?pd_rd_i=B016NGZWVG&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=f52e26da-1287-4616-824b-efc564ff75a4&pf_rd_r=MSCN7C5STT7GCSY8JXVC&pd_rd_wg=d3TEz&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=QB1ot&pf_rd_i=desktop-dp-sims&pd_rd_r=bbafadfb-b84f-11e8-940e-2fb2dccbe537&th=1
​
Drying Towel:
https://www.amazon.com/Chemical-Guys-MIC_721-Absorber-Microfiber/dp/B001TZBQ0S/ref=sr_1_1_sspa?s=automotive&ie=UTF8&qid=1536951373&sr=1-1-spons&keywords=microfiber+drying+towel&psc=1
​
General use microfibers (these tend to shed fibers on glass though);
https://www.amazon.com/Chemical-Guys-MIC_506_03-Professional-Microfiber/dp/B00BQYCK8O?th=1
Meguiars Gold Class Shampoo
Chenille Wash Mitt
Turtle Wax Seal n Shine
Adding on to this - if you don't have access to a hose you can use
ONR with washmitt then dried with microfiber towels.
Oh, and nanoskin wash mitt or pad?
Edit: I meant Nanoskin Sponge
http://www.amazon.com/gp/product/B00CUAWEUM/ref=ox_sc_act_title_7?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Chemical Guys Microfiber Applicators
Griots Garage Microfiber Speed Shine Cloth
Royal Auto Shop & Car wash towels 36 pack
Gummi Pflege Stift
Shurhold Buff Magic Compounding Pad 2 pack
Yacoto Microfiber Chenille Wash Mitt 2 pack
303 Fabric Guard
Invisible Glass 32 Oz - 6 pack
Griots Garage Microfiber and Foam Pad Cleaner
Chemical Guys Foam Cannon and Honeydew cleaner
Optimum No Rinse Wash & Shine 32 oz
Mothers Clay Bar Kit
Sonax Wheel Cleaner Full Effect 169 oz
Griots Garage Microfiber Drying Towel
303 Stain Guard
303 Speed Detailer
Detailer's Choice Leather Chamois
Natural Boar Hair Detail Brush Pack
303 Spray Wax
MATCC 5Pcs White Flannelette Polishing Wheel Cone-Shaped Wheel Grinding Head
Chemical Guys Premium Microfiber Applicators
I used the nanoskin sponge to clay the entire car since the car is pretty new. I let the wax sit for an hour. I've never had much success with 845 even on different cars. I get about maybe 2 weeks MAX. That's on all waxes I have used. I always just wrote it off as my car not being able to be garaged and maybe dirty/mineraly hard water that my city has to use. Also, the way that I'm checking if the wax is still there is by observing how/if the water beads after rinsing and how the paint feels. Most of the time, it's no longer silky smooth and the water doesn't bead in nice circles anymore. The water beads in messy blobs.
 
My process goes:
This takes me about 4 hours...
 
The products I use:
Optum
I’ve heard bad things about the clay mitts. Supposedly they fall apart instantly. Try this guy : Nanoskin (AS-019) AutoScrub Fine Grade Sponge https://www.amazon.com/dp/B00CUAWJ6G. I spray the car heavily with ONR (two cap fulls into a 32 ounce spray bottle, fill the rest with water). Then I brush every section both horizontally an MF vertically with this sponge. If you drop the sponge just dip it in a bucket of water to get everything off. Smooth as glass afterwards. Top it off with some Collinite 845 and your whip will be looking tippy top!!
Just get something from a reputable brand. Meguiar's is good and readily available. Another option you have is using a Nanoskin sponge, which does the same thing as clay, but can be re-used and can be rinsed off if you drop it on the ground, where with clay, if you drop it that piece of clay is done.
2 buckets with grit guards are way too expensive, that's at least $40! Pair that with 2 reusable quality mitts at $30, you're looking at $70 wasted away.
SCREW THAT! Let me break out my $150 pressure washer, my $20 foam lance and $75 for 10 wash mitts It's so much better to do it my way and I save so much in product! /s