(Part 2) Reddit mentions: The best electronic accessories & supplies
We found 63,570 Reddit comments discussing the best electronic accessories & supplies. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 15,404 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Hosa CPR-202 Dual 1/4" TS to Dual RCA Stereo Interconnect Cable, 2 Meters
Dual 1/4-inch Phone Plug to Dual RCA male. 2 Meter cable (6.6 feet)
Specs:
Color | Black |
Height | 0 Inches |
Length | 79.2 Inches |
Number of items | 1 |
Release date | July 2017 |
Size | 6.6 Feet |
Weight | 0.35 Pounds |
Width | 0 Inches |
22. Beyerdynamic EDT250V Headphone Ear Pads Black
VelourSold as set of 2 eachOriginal beyerdynamic replacement ear pads
Specs:
Color | Black |
Height | 1 Inches |
Length | 5 Inches |
Weight | 0.08157103694 Pounds |
Width | 4 Inches |
23. Brainwavz Hybrid Memory Foam Earpad - Black PU/Velour - Suitable for Large Over The Ear Headphones - AKG, HifiMan, ATH, Philips, Fostex
- Replacement earpads made with made with high quality memory foam.
- EAR PAD REPLACEMENTS FOR OVAL HEADPHONES: Our state-of-the-art replacement ear pads are designed for comfort, suitable for ATH M50, M50x and Brainwavz HM5 and many other oval headphones. See below for list of compatible models and dimensions of earpads.
- THE BEST SOUND INSULATING EAR COVERS: Constructed of superior grade memory foam, this ear pad set insulates your ears with a perfect fit so nothing but the purest sound reaches your ear. Out performs your standard earpads and other competitor brand replacements.
- COMFORTABLE ON-EAR PLACEMENT: Relax in comfort with Brainwavz replacement ear cushions. They fit comfortably on your ear without distorting sound. Savor the notes with clarity and comfort.
- SUITABLE FOR BUT NOT LIMITED TO: Audio Technica ATH M50, ATH-M50x, ATH-M30x, MSR7NC, ATH-A900X, ATH-AD900X, ATH-900, ATH-M40x, ATH-R70x, BPSH1, ATH-M40FS, ATH-PRO700, ATH-AD700x. AKG K551, K553. Shure SRH 440, SRH-840. Takstar HI 2050, Pro 80. Ultrasone HF 580. Sony MDR-ZX770BN, MDRRF985RK, MDR-V700, V900, MDR-1A, MDR-RF6500. Fostex T50RP T50, th-x00, T40rp, 20RP MK3. Monoprice 8323
Features:
Specs:
Color | Hybrid Oval |
Height | 4.3307 inches |
Length | 1.1811 inches |
Size | large |
Weight | 0.09038952742 pounds |
Width | 3.5433 inches |
24. Terk 60 Mile Range High Performance Amplified Indoor HDTV Antenna - Supports UHF, VHF 1080 HDTV Broadcasts for Free
- refer the resources at the bottom of the page for proper usage
- Supports up to 1080i HDTV broadcasts for high-quality picture and sound - within 45 miles of the towers.
- DISCLAIMER: Reception quality and channels received will depend on distance from towers, broadcast power, terrain and other factors.
- UHF and VHF elements for reception of all available broadcasts (channels 2-69)
- Highly directional UHF element reduces signal interference - delivers maximum gain
- Integrated amplifier boosts weak signals and preserves signal purity
- Great complement to streaming players and a dependable source when storms knock out cable or satellite television
- Designed and engineered in the USA and meets or exceeds CEA performance specifications for indoor antennas
Features:
Specs:
Color | One Color |
Height | 3.7 Inches |
Length | 14.3 Inches |
Number of items | 1 |
Release date | October 2018 |
Size | One Size |
Weight | 3.3 Pounds |
Width | 12.9 Inches |
25. AmazonBasics 3.5mm to 2-Male RCA Adapter Audio Stereo Cable - 4 Feet
Adapter cable connects a smartphone, tablet, or MP3 player to a speaker, stereo receiver, or other RCA-enabled device3.5mm Male connector on one end and two Male RCA connectors on the other endWorks with left and right audio input and devices with a standard 3.5mm auxiliary jack (typically used for ...
Specs:
Color | Black |
Height | 0.7 Inches |
Length | 48 Inches |
Size | 4 Feet |
Weight | 0.1168438 Pounds |
Width | 0.7 Inches |
26. The Anchor - THE ORIGINAL Under-Desk Headphone Stand Mount
- Guaranteed to hold strong: We recently upgraded to an even stronger European made 3M adhesive. We guarantee it. Contact us if you have any issues.
- Keeps your headphones out of sight & easy to reach.
- Mounts in seconds & holds ultra-securely (with genuine 3M adhesive) to clean/finished surfaces - we guarantee it. Will not hold to unfinished wood or fibrous surfaces.
- Thick premium silicone construction + steel inner reinforcement (new).
- Lessens cord clutter. Can hold two sets of headphones.
Features:
Specs:
Color | Black |
Height | 2.1653543285 Inches |
Length | 4.1338582635 Inches |
Size | Anchor |
Weight | 0.110231131 Pounds |
Width | 1.3779527545 Inches |
27. 2 RCA Male and 3.5mm Stereo Female, 6 Inch Gold Plated Connector, Y-Cable CNE63102
- 2 x RCA Male / 1 x 3.5mm Stereo Female, Y-Cable, 6 inch Gold Plated Connector
- Audio / Video Products
- Audio / Video Adaptors; 30S1-01260
- Connection: 3.5mm Stereo Female Jack
- Length: 6 inches
- Color: Black
- Weight: 0.04 lbs.
Features:
Specs:
Color | Black |
Height | 1.2 Inches |
Length | 1.2 Inches |
Number of items | 1 |
Release date | December 2018 |
Size | 6 Inch (Single Pack) |
Weight | 0.02425084882 Pounds |
Width | 1.2 Inches |
28. StarTech.com 3.5mm 4 Position to 2x 3 Position 3.5mm Headset Splitter Adapter - F/M - 3.5mm headset Adapter Cable (MUYHSFMM)
Connect a 4-position headset to a computer that has separate microphone and audio portsConnect your newer headsets (audio & microphone) to a PC or Laptop for use with VOIP applications (Skype / chat programs)Compact design for maximum portabilityConnect your newer headsets (audio & microphone) to a ...
Specs:
Color | Black |
Height | 0.39 Inches |
Length | 3.54 Inches |
Number of items | 1 |
Size | Female to Male |
Weight | 0.014991433816 Pounds |
Width | 4.92 Inches |
29. J-Tech Digital Premium Quality 1080P HDMI To HDMI + Audio (SPDIF + RCA Stereo) Audio Extractor Converter (JTDAT5CH)
- Extract the digital HDMI audio signal from the HDMI input and convert it to 2 channel analog stereo output or 5.1 channel Audio output. Does NOT support ARC function. Search ASIN:B00YHS5E6Q to find the version that supports ARC.
- Supports the highest video resolution to 1080p. Supports 225MHz/2.25Gbps per channel bandwidth.
- Supports 12bit per channel (36bit all channel) deep color. Supports HDCP, Video EDID Pass Through; Plug & Play.
- Audio EDID Settings: 2CH for L/R or SPDIF stereo output; 5.1CH for SPDIF Output, Supports uncompressed audio such as LPCM. Supports compressed audio such as DTS Digital, Dolby Digital.
- Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH, Support 3D video (To get 3D, all units connected to the splitter outputs must support 3D). This item supports Apple TV and various Blu-ray player and satellite receivers.
Features:
Specs:
Height | 0.8 inches |
Length | 3.3 inches |
Size | HDMI Audio Extractor 1080P@60HZ |
Width | 2.6 inches |
30. VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH
- A pair of side clamping speaker mounts
- Easy Install, 10 degrees up or down tilts adjustable and 360 degrees pan
- Clamp adjusts from 5.3 to 11 inches
- Supports up to 33 lbs; Cable management
- Heavy duty steel construction with wall plate cover. Standard mounting hardware and user manual included
Features:
Specs:
Color | Black |
Height | 2.7 Inches |
Length | 12 Inches |
Weight | 5.55 Pounds |
Width | 10 Inches |
31. Maeline 3.5mm Female to 2 Male Gold Plated Headphone Mic Audio Y Splitter Flat Cable
- 3.5mm Mic Audio Y Adapter: You can connect your newer headsets(audio & microphone) to a PC or Laptop for use with VOIP applications, such as Skype or chat programs, MSN Messenger, Yahoo, Google Voice, etc.
- Quality Sound: Polished 24K Gold-plated connector, aluminum shell, oxygen-free copper wire ensures higher audio transmission without signal loss and noise. Bring your superior stereo sound in both outputs.
- Premium Materials: Durable shielding with pure copper, aluminum housing. Gold-plated plugs and nylon braided cable significantly enhances the durability for a longer lifespan. The strain-relief rings of the connector make it more stable and flexible.
- Widely Usage: Work with most devices, such as Laptops, PC. The cable length is 20cm/8inch, which is compact and lightweight for your road trips and plane rides.
- What You Get: 3.5mm Headphone Splitter Cable. Important Notes: It's only compatible with CTIA standard Android headphones, not compatible with CTIA standard Apple Earbuds.
Features:
Specs:
Color | Black |
Height | 0.2 Inches |
Length | 5 Inches |
Size | 1 Pack |
Weight | 0.02 Pounds |
Width | 3 Inches |
32. Logitech Harmony Companion All in One Remote Control for Smart Home and Entertainment Devices, Hub & App, Works With Alexa – Black
- Works with Alexa for voice control. Performs activities like Lower the blinds, dim the lights, fire-up the TV for movie night—all with a tap of the finger.
- Use your Smartphone (with available app) or included Harmony Remote for one-touch control of your entertainment system and home automation devices such as Philips Hue lights or Nest Learning Thermostat
- Companion remote includes full featured home entertainment controls including dedicated home automation controls
- Included Harmony Hub lets you control devices hidden behind cabinet doors or walls, including game consoles such as PS3, Wii, and Xbox 360
- Simple setup on computer or the available smartphone app – works with over 270,000 devices, including your TV, satellite or cable box, blu-ray player, Apple TV, Roku, Sonos, game consoles, Philips Hue lights, and more
- Model: 915-000239 (Control up to 8 Devices). Please refer to the system requirements mentioned in this page.
Features:
Specs:
Color | Black |
Height | 3.5 inches |
Length | 10 inches |
Number of items | 1 |
Size | 1 |
Weight | 0.2437430768672 pounds |
Width | 5.4 inches |
33. Steam Link
- Commemorate 500 million playstation systems Sold with this limited
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 2.3 Inches |
Number of items | 1 |
Release date | September 2019 |
Weight | 1.9 Pounds |
Width | 2 Inches |
34. Audioengine D1 24-Bit DAC, Premium Desktop Digital to Analogue Converter & Headphone Amplifier
- Audioengine D1 Digital-to-Analog Converter
Features:
Specs:
Color | Grey |
Height | 0.393700787 Inches |
Length | 1.47637795125 Inches |
Weight | 1.10231131 Pounds |
Width | 1.3779527545 Inches |
35. Logitech Harmony 650 Infrared All in One Remote Control, Universal Remote Logitech, Programmable Remote (Silver)
- Replaces up to 5 other remotes, reducing complexity and clutter in your living room
- Supports 5000+ brands, including devices you own today and add tomorrow
- Simple online setup using your PC, live customer support available
- Bright color screen shows your favorite-channel icons plus commands for easy navigation
- One-click activity buttons like "Watch a DVD" automatically switch the right devices to the right settings
Features:
Specs:
Color | Silver |
Height | 5.75 Inches |
Length | 10.79 Inches |
Size | Small |
Weight | 0.4188782978 Pounds |
Width | 1.61 Inches |
36. Mediabridge 3.5mm Male to 2-Male RCA Adapter (6 Feet) - Step Down Design - (Part# MPC-35-2XRCA-6)
- Ideal for connecting portable audio devices, such as a Smartphone (iPhone), MP3 player (iPod) or tablet (iPad) to a stereo receiver, speaker or other RCA-enabled device.
- A beveled step-down design allows plugs to be fully connected, even when bulky cases are on your device.
- Built with dual-shielding and corrosion-resistant gold-plated 3.5mm connectors.
- Seamlessly transmits stereo audio for high-quality sound, while ensuring reliability and reduced signal loss. The cable's flexible jacket is perfect for tight spaces. You can also charge your devices while in use (separate cable required).
- 3.5mm audio cable, 3.5mm cable, audio cable 3.5mm Male to Male, 3.5mm Male to Male stereo cable, 3.5mm Male to Male, iPhone cable, iPod Touch cable, MP3 cable, RCA Y, RCA audio splitter.
Features:
Specs:
Color | Black |
Height | 6.4566929068 Inches |
Length | 1.1023622036 Inches |
Size | 6 Feet |
Width | 6.4566929068 Inches |
37. EarStudio ES100 MK2-24bit Portable High-Resolution Bluetooth Receiver/USB DAC/Headphone Amp with LDAC, aptX HD, aptX, AAC (3.5mm Unbalanced & 2.5mm Balanced Output)
Specs:
Height | 0.5 Inches |
Length | 1 Inches |
Weight | 0.0440924524 Pounds |
Width | 2 Inches |
38. RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit
- Includes 1x RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit
- Great for many applications including general radio, air traffic control, public safety radio, ADSB, ACARS, trunked radio, P25 digital voice, POCSAG, weather balloons, APRS, NOAA APT weather satellites, radio astronomy, meteor scatter monitoring, DAB, classroom learning, or for use as a low cost panadapter with a traditional ham radio.
- Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.
- Comes with our portable dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions.
Features:
39. RCA ANT111E Indoor Digital TV Antenna, Non-Amplified, 40-Mile Range
- High Quality, New, Very Durable Hdtv; Energy Star Certified; Sleek Design
- Results may vary depending upon location, distance from towers, terrain, broadcast power, etc
- Enjoy top-rated HDTV network programming and your favorite shows for Free with no monthly fee or subscription
- Supports up to 1080i HDTV broadcasts for high-quality picture and sound and FM radio broadcasts
- Integrated loop for digital and analog channels 14-69
- Dipoles extend and adjust for digital and analog channels 2-13
- No-scuff pads protect your furniture’s surface
- Designed and engineered in the USA and meets or exceeds CEA performance specifications for indoor antennas
- Note: Kindly refer manual provided for troubleshooting tips
Features:
Specs:
Color | Black |
Height | 9 Inches |
Length | 8 Inches |
Number of items | 1 |
Release date | February 2019 |
Size | As pictured |
Weight | 1.61 Pounds |
Width | 7 Inches |
40. ViewHD 2 Port 1x2 Powered HDMI Mini Splitter for 1080P & 3D | Model: VHD-1X2MN3D
- The model "VHD-1X2MN3D"may come under two labels: U9 or ViewHD; HDMI 1.3 supports 480i/576i/480p/576p/720p/1080i/1080p + 3D; for 3D application, both of the connected displays must support 3D for 3D to work.
- This model is for 1080p@60Hz or lower video. Please check our latest "U9-Pluto" model instead, the U9-Pluto model can completely replace this model and is compatible to HDMI v2.0 source and displays
- HDMI 1x2 Splitter provides the same video and audio signals identical to HDMI input signal at both outputs at the same time.
- Durable and reliable full metal jacket construction; package includes: universal 100V - 240V AC to DC 5V1A Universal power adapter with US plug, user manual and 1x2 DHMI splitter
- Edid duration 4 seconds. This model doesn't support CEC, CEC is not a suitable feature for HDMI splitter, it is good for HDMI switch.
- Max Cable extension 10 meters by 28Awg HDMI cable 15 meters by 26Awg HDMI cable
- For HDMI 2.0 4k@60 application, check our latest HDMI 2.0 Models: UHD1X2S and UHD1X2SA
- Please feel free to contact us if there is any questions, please always contact us when encounter any application problem
- ViewHD / U9 one year replacement warranty
Features:
Specs:
Color | 1x2 |
Height | 0.7874 Inches |
Length | 2.7559 Inches |
Number of items | 1 |
Release date | April 2017 |
Size | v1.3 | 1080P |
Weight | 0.5070632026 Pounds |
Width | 2.3622 Inches |
🎓 Reddit experts on electronic accessories & supplies
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where electronic accessories & supplies are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Yeah it's crazy the little details we think are super important when getting into a hobby that seem to be pretty unimportant later on. I had a Lamy Safari as my first pen, but going into it I thought that the snap cap would be a huge issue. I thought it would be super loud or annoying to put on and off or something like that. Turns out it's not even a problem now that I've got the pen lol.
That pentel looks awesome! I really like the simple and classy look of it. That's a big reason I like the Lamy 2000. It looks like a black pen at first, but is much cooler once you really look at it.
Honestly with speakers, cheap stuff is a lot more fun that expensive stuff to me. I've got a pair of Quad Z-3 towers. Yeah, of course they sound good. If they cost that much and don't, there's a big problem. The thing I like about cheaper speakers is how they all have a very fun character. Once you're spending a lot of money, every speaker out there just tries to sound exactly the same. Cheaper speakers do different stuff though. There are some speakers that focus on midrange, so vocals sound really sweet and warm. There are some that focus on the top end, so you get every little detail up top. There are some that focus on dynamics, so you get that "front row of a concert" sorta feel. I like experimenting with all that stuff. It's just fun. And you don't have to spend a ton of money and get those KEFs to really get into it.
Just for fun, I'll build a cheap setup for you, so you'll know what to get in the future if you ever feel inclined haha.
The Micca MB42X are really the "go-to" starter speaker. They're one of the cheapest that sound decent. And, honestly, they sound really good.
SMSL SA50 to power them. That's on sale for the same price as the SA36 right now. They're the same thing, just this has more power. You don't need it, but you might as well have it haha.
Some speaker cable. You need to cut it and strip it to put it into the speakers. There are quite a few tutorials out there on it. It's pretty easy.
Cable to plug it in.
Boom, just like that you've got a sweet stereo speaker setup that will blow any single speaker out of the water, and easily impress anyone! It comes to around $150 with everything.
I'm not trying to talk you into anything, but I'm basically pointing out that you don't have to spend thousands of dollars to get a respectable system.
While we're on this, another thing I like about hobbies is that anyone can be in it at any price range, and that's super cool to me. If someone only has money for a $15 Pilot fountain pen, who cares? That's awesome that they like fountain pens! They don't need to have a $200 fountain pen to be cool. Just anything is sweet. Same with speakers. You don't need a multi thousand dollar system to be "into audio" or whatever you'd call it. If you've got a setup that you like, at whatever price, that's sweet! I'm glad we both enjoy music.
No matter what you do, it's always better to start small. Start small, make small mistakes. Start big, make big mistakes. The important thing is to experience a little of everything while spending as little as possible. Then, you can make your money go further, to maximize your fun and experience.
Don't get all-in-one radios. They're expensive, and if you break something, nothing works. It's better to get a bunch of separate radios that are a lot cheaper, so if something breaks, you're not off the air.
u/ElectronSpiderwort recommended a Kenwood TM-D710GA:
Absolutely consider getting this radio. Even if you get other radios, you will still love this one. You can do so many different things with it, it will keep you busy for a long, long time, even if that were the only radio you got. My favorite feature is the ability to send text messages. You can even send to cellphones via email. Each phone company has an email alias for SMS messages, so search for the SMS email address for the particular phone (phone company) you want to reach, and you can send text messages to that phone even the user is not licensed. They can watch your travel on a map if they want to see where you are.
It's an expensive radio, but you can save a lot of money buying it used. People take care of these things, so you should have no trouble finding one in near-new condition. Buy two, one for your vehicle and one for home.
A Mirage B-320-G 200 watt 2 meter amplifier is the only amplifier you will ever need, if you need one at all. It will work equally well with a handheld, or a mobile radio, and at 200 watts, it's not in the price-capability region where it's cheaper to just buy a dedicated high-power radio. You can buy it for a mobile, or buy it for a handheld, and eventually use it for both. It actually puts out about 240 watts at full power. That's impressive, and way more than you will ever need. If you put lower input power, it outputs lower power, so it basically covers everything, which is awesome.
One HF radio I would like to have is a Motorola Micom 3, because it can work any HF frequency, and it does a great job of it, but it's almost $8000 with no accessories:
Marine is a big part of life in Maine, and having access to marine frequencies could be helpful. I have forgotten if a Micom is type accepted for marine used, but if it is, you might save money by getting one. It's as good mobile as it is at home, and there's even a backpack version if that's your thing.
A Motorola APX 8000 handheld costs about as much as a new Micom at $7000+, but you get 4 bands and lots of features. I would prefer to get a Yaesu FT-60R with the AA NiMH pack. It's cheap, works great, and it's designed for AA NiMH batteries! I currently use a Kenwood TH-F6A, which is much more expensive with amazingly fast scanning speed on 2 receivers simultaneously, but the radios I use the most are Motorola MT352R FRS radios I can buy nearly new after holidays for about $23 each (people return them and they get sold as "open box" or refurbished for half price). The performance beats any ham radios I have ever used, and they're so cheap you can loan them out like candy. I keep them in plastic bags so they're always clean and new, and nearly waterproof. They are also designed for AA NiMH! AA batteries are important. See r/AAMasterRace.
I have a nice selection of fine quality BNC telescoping antennas tuned to all the frequencies I care about, from Smiley Antennas. Put a low profile BNC adapter on your new radio as soon as you get it, and get those big antennas from Smiley. The Kenwood TH-F6A goes down to 0.050 watts, so with a big antenna, you save battery above all. People think of antennas as being for a lot of various purposes, but they don't often think of battery life, because most radios can't go as low as the Kenwood TH-F6A. With the big antenna, the low power gets out just fine, and no matter how rich you are, batteries are bulky and heavy and it's always better if you don't need more of them. I got the biggest 2 meter and 440 MHz antennas Smiley makes. I got their tri-band antenna, and antennas tuned for FRS, MURS, marine, and probably a few other things I have forgotten. Be sure to mark your antennas so you know what frequencies they're tuned for.
An ADS-SR1 simplex repeater with the larger memory option will get a lot more use out of all your handheld radios and mobile. It runs on AA batteries, and it has a voicemail system. It's not a lot of money to greatly expand your capability.
I want an MTR3b_LCD, because it's the only radio small enough to EDC that can go around the world, on 40, 30, and 20 meters. Nobody else has a smaller, more capable radio. The radio, the antenna, and batteries, will all fit in your back pocket. Ridiculously amazing.
Contact K1EL and tell him to make a Morse code keyer that emulates a USB keyboard, so you can practice Morse code in your routine PC usage at 45 WPM. You will become an expert very quickly that way.
Begali Adventure Mono will work equally well portable as it does on a desk. If you buy one key, this will do it all. Don't get a 2-lever iambic key, they suck. All the fastest Morse code operators use single lever keys. NOBODY codes faster with an iambic key. NOBODY. I have no idea why people think they must have this useless feature. Palm Pico Single, N3ZN-SL (single lever), American Morse Equipment Mini-B, and any nice touch key, would round out your collection of keys. Again, avoid iambic 2 lever keys like the plague. They are poison.
An Elecraft KX3 (10 watts) with a KXPA100 (100 watts), and a KPA500 (500 watts), along with all the other accessories like a PX3 (SDR waterfall display) etc, will cover all of your regular ham radio HF needs, from portable QRP, to high power at 500 watts. You will have a lot of flexibility with this setup, and it's not super expensive. The best part is Elecraft gear has a high resale value, so you will have no trouble dumping it if you decided it's not for you.
If you like luxury gear, take a look at Elecraft's other radios. You might decide to buy nothing but Elecraft. A lot of people do, and Elecraft has rightfully earned that loyalty.
Airspy HF+ SDR. It's the most bang for your buck, and outperforms most radios at any price, but it only costs about $160, if I remember correctly. You can never have too many inexpensive, high quality receivers.
RTL-SDR. It's $30, and does everything up to gigahertz range with mediocre quality, which is what you would expect from a receiver that costs 5 times as much. This thing is versatile. When you just need to test something, or monitor something extra on the side, these are handy. Many people own 2 or more. I like to dedicate mine to monitoring FRS frequencies, because I wouldn't want to dedicate a more expensive receiver to such a low job. An RTL-SDR is probably the smartest first purchase you can make, especially if you believe in my "start small" philosophy. Even when you go big, you will still find uses for these things.
You need test equipment, like dummy loads, watt meters, SWR meters, antenna analyzers, etc. And power supplies. You need to know what your equipment is doing or not doing.
Get a nice antenna system. You don't need to spend a lot of money at first, but antennas should be on your mind while you're selecting radios. Antennas make or break your station, regardless of what radios you have.
That's all I can think of for now. I'm sure you will have a lot of fun shopping for new gear!
Just upgraded from my ATH-M50s. Well not price wise, but imo, soundwise.
I bought them for $50 off Newegg on Sale. Incase you haven't figured it out yet, they are the Phillips SHP-9500s.
__
First impressions:
Comfort:
____
Sound:
Bass
Midrange
Trebel
Soundstage:
_____
Overall the sound is very good in my opinion.. especially considering the $50. It's an absolute steal if you ask me!
__
Notes: Remember these are openbacked headphones, so not really made for public use as everybody will be able to hear what you're listening to, as well as you be able to hear all the noise around you.
This isn't really a con, because it's how they're made, and it's to be expected. So if you're looking for public use, you should not be looking for a pair of open backed headphones.
____
Extra Information: The intergrated amp you are seeing is a Cambridge Audio Azur 640a v2. I use for my Vienna Acoustic Mozart Grand speakers. I use the headphone port for my headphones. The dac that it's being run through is a Fiio D3 (D03K).
Absolutely.
For your controller needs, if you want to use a DualShock4, DS3, Wii U Pro Controller or WiiMote, all you need is a mini Bluetooth dongle and a driver such as DS4Windows (google "[controller] driver windows"). With the proper driver they should be supported under most games, but they might require a button mapping tool to work with some stuff (we can help you with that).
If you want to go the easy route and have a controller supported by most games with no driver configuration as soon as you plug it in, an Xbone controller is your choice. However, it will require a special M$ dongle to work wirelessly, and be warned that this dongle only works under Windows 10. Alternately, if you can live with some inferior design features, you can get a 360 controller (which still works with nearly all controller games) and its corresponding dongle, which has the added benefit of working with all Windows's back to XP. However, be aware that both of these controllers require AA batteries rather than the rechargeable packs found in DualShock/Nintendo. You can buy a rechargeable pack for Xbox controllers but it obviously costs extra.
All of the aforementioned controllers will also work over USB with any operating system.
Now to the second part of your question. I assume that you mean you want to play on your TV–this can be accomplished one of two ways and is easy to setup. The first and most obvious way is to simply keep your PC in your entertainment center and hook it to your TV over HDMI, in much the same way that you would your PS4. Steam's Big Picture mode tries to emulate the homescreen of a console to make controller navigation easier, and does a pretty good job of it. Coming from the PS4 interface I'm sure you'll feel right at home–but you do still need a KB+mouse to get in Big Picture from a cold PC startup. This shouldn't be an issue as there are many cheap wireless keyboards with inbuilt trackpads on offer.
The second way is to use a Steam Link. This is a very handy little set-top box that will stream video input over the internet from a PC in the house–if you've ever heard of the PlayStation TV, this is similar. In order to use the Link you must have fast (at least 10mbps; check using speedtest.net) Ethernet on both ends (your PC and the Link) and a controller that connects over USB (either thru a USB cable or a USB wireless receiver. The Xbox receivers mentioned in a previous paragraph currently don't work with the Link but Valve says they are looking into it). It's very simple to setup–hook the Link to internet, plug in your controller and HDMI cable for TV connection, and pair it with your PC. Then you'll have total access to all your controller-supported PC games from the couch, with no loss of graphics.
Also, as a PC gamer, I have a word for you–there are some games that do play better with KB+M, especially shooters. Trust me, once you try something like Call of Duty with a mouse, you will never be able to go back to aiming with controller sticks. If you want this benefit but still find KB+M uncomfortable, there is the Steam Controller which features a more accurate trackpad in place of the right stick, and will work with most of the games that an Xbox controller works with.
One final word. If you are actually, legitimately serious about getting into PC gaming–please for the LOVE OF GOD do not buy a pre-built one. BUILD. YOUR. OWN. Seriously, if you are looking to surpass consoles and get value for money, I CANNOT stress this enough. Although it may seem daunting at first it's really little more than high-tech LEGOs–/r/BuildaPCforMe will furnish you with a parts list so you don't have to bother with that, and then the build will take two hours tops (even if you're inexperienced). There are tons of great videos on YouTube that will show you how–this is my personal fave, although I do advise you not to use any of those parts since that vid is considerably old.
If you have any questions feel free to reply to this and I can help you out.
Gallery: http://imgur.com/gallery/7N0G8
The end of 2016 brought in some really nice upgrades to my AV setup, including:
TV - Samsung KS8000 65" - Not too much to say about this TV as it's very widely discussed on this subreddit. I scored it with EPP pricing and 10% (doubles to 20%) cash back through discover for around $800 all said and done.
http://www.samsung.com/us/televisions-home-theater/tvs/4k-suhd-tvs/65-class-ks8000-8-series-4k-suhd-tv-2016-model-un65ks8000fxza/
AVR - Yamaha TSR-7810 - This is the Costco version of the Yamaha RX-V781. Purchased new for $464 after a $25 off coupon. Very capable unit for the price.
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/tsr/tsr-7810/
Game Console - Xbox One S - Used for gaming, streaming and as UHD player.
http://www.xbox.com/en-US/xbox-one-s
Front speakers - Axiom M60 V2 - Scored these audiophile grade speakers along with the side surrounds for $400 dollars total on craigslist. Great price for 4 higher end speakers imo.
http://www.axiomaudio.com/m60-floorstanding-speakers
Side Surrounds - Axiom M3ti - Purchased these along with the M60 fronts for $400. A little large for surround speakers, but I figured I may as well use them since I have them.
http://www.axiomaudio.com/m3-bookshelf-speakers
Speaker Stands - Pangea Audio LS300 - I needed 36" speaker stands and these fit the bill. Reasonable stands for the price of $139. I have the columns mass loaded with play sand.
https://www.amazon.com/gp/product/B01EVNE96C/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1
Speaker Mounts - VideoSecu speaker mounts - Some cheap wall mounts, pretty sturdy and have decent positioning capabilities.
https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
Here is the existing gear that I did not upgrade yet but is still being used:
Center Channel - Polk Audio CSi3 - Part of my older entry level stuff. This is the next thing I am looking to upgrade as I'd like to match the center to the fronts. TBH I don't really notice difference in timbre as much as others may.
http://www.crutchfield.com/S-JdQDXbhbK4P/p_107CSI3B/Polk-Audio-CSi3-Black-oak-finish.html
Subwoofer - Velodyne CHT-8 - Go ahead, laugh. Yeah it's only an 8" subwoofer but it does the job for now. Provides pretty good LFE for it's size, just doesn't extend very low. I currently live in a rented townhouse and the wall where the TV is is shared with my neighbor. I'm looking to upgrade to a 12" in the future, either SVS or HSU. But most likely won't happen while I'm living here.
http://www.audioreview.com/cat/speakers/subwoofers/velodyne-acoustics/cht-8/prd_286736_2741crx.aspx
Rear surrounds - Polk Audio M10 - These are pretty cheap speakers, but they could be worse. I don't have any plans on upgrading these unless i find a great deal on something used, or if they break.
https://www.amazon.com/polk-audio-m10-bookshelf-cherry-pair/dp/b002bsha66?tag=indifash06-20
Moving forward and comments:
I would like to get a 2 channel amp to power my front speakers to really wake up their full range. If anyone could recommend a good stereo amp that I could hook up to my pre outs that would be great. I have no experience in external amps and am pretty clueless to it honestly.
I know my cable management is not the greatest ,but unfortunately being a rented house there is not too much I can do.
I do realize that my rear soundstage is a little on the cramped side, the Side surrounds are rather close to the couch and so are the rears. I am lucky enough as it is that I got my GF to agree to moving the couch from the wall in the first place. Honestly, even with it being cramped I get a good effect and immersion, so I'm happy.
Subwoofer placement - This isn't really where I want the sub to go, but I did the crawl and it sounded decent here. Having a neighbor sort of forbids me to place it in the front soundstage.
TV is crooked. I have the TV mounted on the cheapest stand ever from Wal-Mart about 5 years ago. Eventually when I'm a homeowner the TV will get a proper wall mount, but this will do for now.
If anyone has any critiques or comments feel free to give me input. I'm always looking for ways to improve my setup.
After I finished building my PC, I still wanted to build but had nothing else to put into it... so I went a little buck with the peripherals.
Mouse: Cyborg R.A.T 9
I got this mouse for two reasons: it's extremely ergonomic, versatile and comfortable to use and it looks like it could probably transform into a Decepticon.
Keyboard: Razer Blackwidow 2012 Ultimate
The keyboard was actually a gift, I have really enjoyed everything about it though. Besides the glossy finish that does get really mucked up, I have no complaints.
Mousepad: Razer Goliathus Extended; Control Edition
I wanted my mouse and keyboard to both be on my mousepad so I opted for this giant ass thing. It's worked really well for me, besides collecting crumbs when I snack and game...
Speakers: Audioengine A5+ Bamboo Edition
Picked these guys up for a steal, they sounds completely phenomenal. Owning these speakers kind of pushed me into the world of high end audio, which eventually lead to me getting my DAC and my headphones.
DAC: Audioengine D1 DAC & Integrated Amplifier
Got the DAC here on Massdrop for like 40% off or something, I've found that it really rounds out the low end of the speakers and gives them more transparency overall.
Headphones: Sennheiser HD598s
I can't speak highly enough of these headphones. If you're into electro or metal, these probably aren't for you merely because of the fact that they are a very neutral sounding set of cans. The low end is definitely there, but it's not pounding and overpowering like many other headphones I've owned. I still swap over to my old HD408's for anything I want to rattle my skull with.
Headphone Stand: Cheap Knockoff of the Seivking Omega stand
Same thing, off Massdrop for a good price. It's a cheap Chinese version of a very high end stand but it has actually been really nice to keep my headphones on and compliments the speakers really well.
Headset: SteelSeries Siberia v2 Frost
Very comfortable headset, and really good surround effects on them. I could always tell where Elizabeth was in Bioshock Infinite because they have great directional sound.
I'm also running 2 of these fans on my desk to keep everything nice and cool during those hot summer days. Throw some LED accent lighting, a couple of USB hubs and some monitor mounts and you've pretty much got everything that sits on my desk.
Oh, and I almost forgot the best part! It probably gets the most use of any of my peripherals =]
Hope this helps your decision! I would certainly recommend a mechanical keyboard, you'll never go back after you've tried one out and there's many inexpensive options for them out there!
Jesus, this turned into a really long comment...
Hey all!
This is probably old news for many of you but for those thinking of setting up GroovyMAME with CRT_EmuDriver, do it; you won't be disappointed. It is a little bit of mucking around but the fruits of your labour are well worth it.
Some helpful links that I've collected along the way:
GroovyMAME -- Get the latest GroovyMAME from here. This forum is also pretty active so if you get stuck, you may find someone else in a similar spot as you. A great resource!
CRT_EmuDriver -- Get the latest CRT_EmuDriver versions here. Also has guides for setting up based on your selected hardware / software setup.
Wavebeam Guide -- Excellent and comprehensive guide from Wavebeam detailing the entire setup (including software and hardware requirements). Given that it is over a year old, use it as a reference to give you an idea of what is involved. The hardware aspects are pretty much the same now, but some of the pieces relating to software you will want to seek more up-to-date info.
Buttersoft Windows + CRT / PVM Guide -- buttersoft's supremely thorough thread on hooking your PC up to your CRT / PVM. Lots of great info here.
GroovyMAME Setup Thread -- Recap's thread on setting up GroovyMAME. The guides and posts on the Eiusdemmodi forum are descriptive and thorough. In particular, you should read this post as it has useful information pertaining to audio latency (search for 'PortAudio') and I foolishly missed it the first time and wasted a lot of unnecessary time with ASIO4ALL.
As for my setup, before I begin, I will point out that it is not ideal for someone planning to avoid Windows and boot directly into a MAME frontend. For that, you should really consider a discrete card that be flashed with Calamity's ATOM-15 -- more info here. I went the way I did because I wanted to be able to keep my computer relatively versatile given that I already have a dedicated cabinet.
With that out of the way...I spent probably more than I needed to getting this up and running. I couldn't find a whole lot of info about people who have set this up on relatively "new" hardware. Most people tend to favour older OS's and discrete cards, whereas I was more interested in Windows 10 and an AMD APU based system after reading this post outlining the hardware behind the recent SkyCurser arcade game. Enough waffling on:
It is all hooked up to my Olympus OEV-203 via a VGA to RGBHV cable, with the H/V sync on a BNC Y adaptor (male to dual female). I am just running the audio through the mono speaker on the PVM at the moment using a 3.5mm to RCA cable with a RCA Y splitter.
Hope this helps some of you. Good luck!
Oh man. Brace yourselves, I am a total Amazon junkie. (Note: These may not all be BIFL, but I'm responding to the OP in specific.)
And, saving the best for last:
----------
EDIT: As requested by /u/Mogrix, I posted List Part II: Electric Boogaloo, with more items from my Amazon history.
Headphones:
Headsets:
I have Audio-Technica ATH-AD700X, Beyerdynamic DT990 (600 ohms), Philips Fidelio X2 and Sennheiser HD598 of these.
AD700X has subdued sub-bass and emphasized treble. It has clean bass and a little harsh treble. It has a huge soundstage, excellent imaging, separation and clarity, and great detail retrieval.
DT990 has subdued sub-bass, emphasized mid-bass and very emphasized treble. It has clean bass and a little sharp and splashy treble. It has a huge soundstage and excellent imaging, separation, clarity and detail retrieval.
Fidelio X2 has emphasized sub-bass, mid-bass and treble. It has clean bass and, as far as I remember, smooth treble. (The stock earpads caused channel imbalance, so I discarded them around a year ago, and haven't bought new stock earpads yet.) The soundstage is very wide, like the others I've mentioned, but it lacks some depth. It's probably only noticeable if you play competitively or compare it side-by-side with headphones that are deeper. This affects the imaging from front to back. The imaging from left to right is excellent. Separation and clarity are excellent. Detail retrieval is great, but the bass overpowers/masks sound cues a lot.
HD598 has subdued sub-bass and is mid-forward. It has clean bass, smooth treble, and excellent clarity. I haven't used it much, so my impressions are that it has a large soundstage and good imaging, separation and detail retrieval.
K701 and K702 are too hard to drive for the MixAmp. K612 might be loud enough, but is said to sound much better with a dedicated headphone amplifier. You can use an amp with the MixAmp. You'd need a 3.5mm-to-RCA cable and a TRRS Y-splitter. The featured amp is Schiit Magni, which has been replaced by Magni 3 and is a very powerful amp. It can also drive the 600-ohm version of DT990 and DT880.
To use an amp without the MixAmp, you'd need a DAC (digital-to-analog converter), e.g. FiiO D3, Schiit Modi 2 Uber or Topping D30. There's a common problem with reversed left and right channels when using USB DACs, so use one with optical unless the product officially supports PS4. You'd need an RCA-to-RCA cable to connect the amp to the DAC. You could use a DAC-amp instead, like Micca Origen G2. It can't be connected to the MixAmp, only separate amps can.
As far as wireless headsets that are surround sound, you have the following compatible with Xbox One:
>Turtle Beach
>* Elite 800X - $299 - Great when it works. I personally had issues with 3 sets and decided it wasn't for me.
> Astro
> A50 - $299 - There is an A50 that is out now that is commonly referred to as the "Halo A50." It is the current generation model that comes with the headset stand, base station, etc. It's a great headset that is mostly wireless. For chat, it requires a cord from the headset to the controller.
> A50 (new) - $299 - This version is not out yet, and has been delayed. The biggest difference between the newest model and the previous generation is this model is completely wireless with no cords from the headset required.
>SteelSeries
> SteelSeries Siberia X800 - $309 - This wireless headset uses a cord to the controller for voice chat. I am unfamiliar with the headset but it seems like a valid third brand option, in no particular order.
>Wired Headsets
> This requires some type of surround sound receiver, headphones, and a mic. There are bundles available from Astro, Turtle Beach, Razer, SteelSeries, etc., but one can obtain better quality by mixing and matching the best of each part: the receiver, the headset, and microphone (if it isn't included in the headset)
> Surround sound receivers
> This is pretty much between Astro's Mixamp Pro TR and Turtle Beach's
> Astro's Mixamp Pro TR for XO, PS4, PC and Mac - $130 This is one option for dolby digital 5.1/7.1 surround sound decoding and Dolby Headphone encoding for any standard stereo headset.
>* Turtle Beach Elite Pro TAC - $199 - This is a second option for DTS surround sound via DTS Headphone:X 7.1 Surround Sound. A lot of options that aren't available on the Mixamp Pro TR are on the Turtle Beach TAC such as being able to adjust background noise, microphone boost and mic monitor levels instantly and physically.
> Differences between Astro and Turtle Beach They both do a great job at providing situational surround sound to stereo headphones. With the current firmware updates for each respective unit there does seem to be a sound quality difference with a lot of people prefering the Astro. I recommend plugging in headphones and watching this video and hear the differences for yourself: Astro Mixamp Pro TR vs Turtle Beach TAC
>Headsets
> Some of the best headsets recommended by those on HeadFi.org can be read about here. This is where I had come to my selection of the AudioTechnica ATH-AD700.
> If you would rather buy a wired surround sound headset ready to go out-of-the-box
> For a wired ready to go set, I'd have to put my money on the Astro A40 Mixamp Pro TR, although I personally prefer open-back headsets instead of sound isolation closed-back headphones.
If it were me buying a set today...
I would want something wireless so it would be the newest Astro A50 that comes out in October, or the SteelSeries X800, but then again, it is because I've went down the wired path, using a mixamp or DSS with many different wired headphones and mics. Even if I didn't have cord-loving cats, I'm glad that I have a wireless headset. It really is a personal preference that you can't really pin down, until you try some yourself.
A side note: I have an average sized head, but larger than average protruding ears. Every headset I've purchased, I've swapped out the earcups with aftermarket sets. Most notably brainwavz HM5 earups. They are deeper and more comfortable for me and have worked on most sets of headphones without modification. I highly recommend them. They come in Pleather - various colors, Hybrid pleather + Velour, and just Velour
Nice, a sleek black and white aesthetic. Nothing is out of place here. Glad you went with a mouse mat with a small logo.
I don't have any suggestions really since it's all but perfect. I can offer a potential upgrade or two if you have money that needs spending!
A headphone stand has already been mentioned but the style of headphone stand that you decide to go with is also a consideration. You can get ones that stand on your desk. These are good if you want the headphones to be a point of attention on the desk. They are nice-looking Grados so might be a good idea.
If you want headphones on your desk but not to take up any space then you can get ones that attach to the edge like this or to the underside of the desk like this.
If you don't want them to be anywhere near the desk then you can find wall mounted ones or something you can stick to the side of a desk leg if it's wide enough à la this.
If you want a better quality LED bulb for your lamp (because it is a nice lamp!) then it might be worth investing into some high CRI (90+, ideally ~95-97) LED bulbs. They can be expensive but they are very nice. Make sure that you double-check the base type of the bulb already in the lamp before you buy. Yuji LED sell what are probably the best LED bulbs you can buy right now. You can also choose between colour temperature. If you only use the lamp during the evening then go for the 3000K option for a warmer colour.
For a future and more expensive investment (that could also become a hobby), you should look into buying or building a custom mechanical keyboard. Your setup would love it! Check out /r/MechanicalKeyboards if you're interested.
Hope this helps!
Miles.
hey friend, i recently wrote a "how to" setup APRS with a HT, Direwolf, and YAAC on linux. copy paste is below ...
edit:
If audio is getting from the radio to direwolf, check the volume levels on the radio output, and check the mic gain on your computer. These are really the only two settings that will affect how direwolf can rx and decode. Direwolf logs out when it receives something, and it tells you on a scale of 0-100 the volume level. I try to shoot for 50-60 and I get very consistent decode.
Tutorial: APRS software user interface, with software based audio TNC, and RF gateway
Overview:
APRS is a tool that was designed to convey information about objects, telemetry, and reporting, as well as communicate between individuals and groups with direct, and group messaging. Many people have the experience, or mindset, that APRS is used primarily for location tracking. This is partially due to the limitations on many hardware implementations of APRS that vendors have provided. One way to learn more about APRS as a broader, and more powerful system is to utilize software to visualize, and interact with other stations, and objects. This short tutorial will discuss how to setup a software based user interface (UI) for APRS that will provide you with mapping, messaging, and object manipulation abilities, as well as how to connect that UI through a software based audio modem, or TNC, directly to a radio, so that other users within your immediate range, as well as the range of any digipeaters will be able to interact with the same local APRS data without any reliance on the internet, or internet gateways.
User interface:
There are several different user interfaces available that have been designed for APRS.
UI-View is a popular piece of software which is no longer being maintained as the original author has passed away.
YAAC is a successor/replacement to UI-View which is cross platform (Java) with a intuitive interface, and many capabilites. We will be using YAAC for this tutorial.
Xastir is primarily a Linux application built on the X windows library system. It is quite functional, but is less intuitive and is currently less activly developed than YAAC.
Audio Modem (TNC):
TNC's originally were AX.25 packet assembler/dissasemblers with the addition of a modem to convert baseband digital signals into audio tones. In the case of a software TNC, it has the same capabilites, encoding and decoding both the AX.25 layer, and data layer to and from audio so it can be transmitted or received from a radio.
Direwolf is the premier audio tnc, which is documented to run on Windows, OSX, Linux, and single board computer Linux environments such as Raspberry Pi BeagleBone Black etc.
RF Gateway:
The RF gateway is probably the simplest piece in the equation. You need only a radio that supports audio in, audio out, and VOX. There may be some complexity if you choose to make your own cables, however there are ready made cables for popular and inexpensive radios (Baofeng) which are available for under $20 from amazon, which feature isolation to protect both your computer, and your radio.
Here is a link to a high quality cable available on Amazon, which works for Boafeng radios: https://www.amazon.com/APRS-K2-Connector-BaoFeng-APRSDroid-Compatible/dp/B01LMIBAZW
Supplementary:
It can be very helpful to have a radio that is capable of broadcasting an APRS beacon to test your setup as you go.
Your laptop may have a single plug for both headphone and microphone (TRRS) or it may have two seperate plugs. If you have two seperate plugs, you will need a splitter to seperate the microphone, and headphone connections from the cable linked to in the above RF gateway section. The cable linked below will split the two should you need it.
https://www.amazon.com/StarTech-MUYHSFMM-Headset-Splitter-Adapter/dp/B0058DOWH6/
System setup:
We are going to build the APRS system from the ground up, starting with Direwolf, the audio modem/tnc and the RF gateway. If you are a Linux user, there are packages for direwolf in ubuntu/debian as well as yum based systems:
sudo apt-get install direwolf or sudo yum install direwolf
For Windows and OSX go to https://github.com/wb2osz/direwolf and follow the instructions to download the latest release and run direwolf from a command window.
direwolf does not need any configuration for our initial setup, simply run direwolf, connect the audio and microphone jacks between the computer and your radio, and tune your radio to 144.390.
Be certain that you do not have any rx-CTCSS or DCS tones setup. Set your squelch as low as it will go, and enable vox with the lowest setting possible on your radio. Now is the time when it is handy to have a HT that is capable of beaconing APRS data. If you have one, set it to beacon and you should start see data coming in on the terminal where direwolf is running. You may need to adjust the volume on the output of your radio, the output of your computer, as well as the microphone gain on your computer to get everything decoding properly.
Once you can reliably decode becons from a local HT, or from a digipeater within range, you can move on to setting up the YAAC user interface, and connecting it to direwolf.
YAAC, the APRS user interface software we are using, is a Java program and requires that your system has the Java runtime environment installed. For Linux users, be certain that you install the full JRE, and not a "headless" JRE, as the headless versions do not come with the graphical libraries that YAAC requires to run. Also as of this writing YAAC did not work with Java 9, however I experienced no problems using the OpenJDK Java 8 JRE so be sure to check the version you are installing.
After you have the Java Runtime Environment installed, download the self upacking binary for your operating system from the YAAC website at http://www.ka2ddo.org/ka2ddo/YAAC.html#install
For linux users, the file was not set as an executable, so I had to chmod +x YAAC_linux_x86.bin before running ./YAAC_linux_x86.bin
NOTE: YAAC does not extract itself into a directory - so you likely want to create a directory first, then move the self extracting file into that directory so that you dont end up with a bunch of files all over.
After the package has extracted, simply run the YACC.jar program. You can do this from the command line with: java -jar YACC.jar
YACC will ask you if you want help configuring it, select yes and walk through the steps configuring your call sign, latitude/longitude etc. When you get to the part about adding and configuring interfaces, select the option to "Add AGWPE Port". YACC will create a new window with default information populated - you MUST add your callsign, and change the transmit dropdown from "disabled" to "enabled". Click finish, and on the next screen you can decide whether you want to beacon or not (I chose yes) along with any free form comment you want, then click finish.
That is it - you have a basic APRS software station set up that can transmit, and recieve via RF link. You should see objects start to appear on the YAAC map view, and the direwolf command line output should match up with data YAAC is displaying.
Homework:
From here you can learn how to create message groups, chat directly with stations, place objects on the map so that they are only visible to other local RF stations, or so that they propegate out through the internet via a digipeater I-Gate (if one is in range) so that they show up on the APRS-IS backbone (e.g. aprs.fi).
> are there bluetooth headphones that actually sound good?
I've been on a quest for actually good sounding bluetooth headphones myself recently, and the conclusion I came to was - no...not without some help.
Get this: ES100. Clip it to something (it's incredibly tiny and lightweight) + whatever headphones you want (if the cables are swappable, then look for some short ones... Fiio makes some short MMCX cables for instance). Bam, any headphone you want is now bluetooth at basically its full potential. It drives everything I've tested it with amazingly well (quite a bit better than my Schiit Fulla, at any rate) and sounds amazing.
If you will also be using the headphones for gaming or movies/TV, then instead get the BTR3 ... the ES100 is slightly better (more gain, more firmware updates, more configurable options, etc) overall for AptX-HD music playback (or LDAC, or AAC), but it doesn't support AptX-LL (low latency) mode, which is important for anything interactive. BTR3 supports all of those including AptX-LL. In low latency mode, I can just barely perceive a slight delay in terms of lip synchronization, but only just barely if I'm doing my best to look for it, and I might just be imagining it. For any casual media consumption or gaming bluetooth via AptX-LL, at least with the transmitter I'm using and this receiver, is good enough.
I've tested both of these with my Fiio FH5 and Etymotic ER4XR IEMs (both of which are quite resolving IEMs), and in both cases it sounds 100.00% indistinguishable to my ears compared to just plugging them into my smartphone. On the other hand, when I connected them via SBC codec using a USB bluetooth dongle, I could easily tell. Though, actually, even via SBC things still sounded better than I figured they would....goes to show that the default SBC codec isn't the only problem with most bluetooth headphones. Decent headphones via SBC still sound fairly decent, if not at their absolute best.
Oh, and the ES100 has an optional "high gain" mode, but even with that disabled, it gets me significantly higher volume if I pump it up to painful max levels (as a test) compared to the BTR3. The BTR3 was never too quiet at max volume for me, but if I had headphones that were hard to drive then that might sometimes be an issue.
I ended up tightening my budget quite a bit on this new home theater, so some of my choices aren't as nice as what I had before, but I'm very happy with what I got in the end. I want to thank everyone who gave me advice in my last post here. It was all very helpful!
I went with a 65" Samsung 120Hz smart TV. I decided against getting the 240Hz because I couldn't see a difference between the two when looking at it, and the 3D makes my wife sick in any case. That saved me almost $500.
For the receiver, I took everyone's advice and opted away from the all-in-one set I'd been looking at. Instead, I got a great price on a Pioneer VSX-824 that I've been very happy with.
I know the Denon reciever is what everyone recommended, and it's what I bought at first, but strangely enough my PS3 didn't work with it. It worked just fine connected to the TV directly, and other devices worked with that HDMI cable and port, but the PS3 just told me to go fuck myself. A quick google search told me that it's a flaw in the way the HDMI handshake works with Denon receivers, so back it went.
I went with Pioneer speakers as well, hooking up a
pair of tower speakers for front left and right, a pair of matching bookshelf speakers for the rear, and the matching center speaker.
The subwoofer will have to wait, for now, but the plan is to purchase the matching subwoofer when we're ready.
Instead of the Harmony Ultimate, which didn't seem to get any good remarks, I opted for the much cheaper Harmony 650, which has made my wife very happy. No more frayed tempers about what button does what on which remote. I'm even buying my parents one for Christmas.
I'm hugely pleased with the upgrade over my previous setup, even if it's not everything it could have been. What do you all think?
I drew on your map for the hell of it :P Probably not necessary to do that to give recommendations, but it was fun. Witness!
C9 is a great TV, call it $2k.
I would get two subs. A pair of VTF-2 is fine, but go VTF-3 if you don't want to wonder if you got enough sub. I marked the corners in the image with 1/2/3/4, I'd first try opposing corners and see how that sounds and/or measures. $1150 shipped for the pair of VTF-2, $1750 shipped for the pair of VTF-3. For $600 more you get a pair of 15" subs and no wondering. I say $1750 on the sub category.
I've drawn your setup from the top, so I'll go ahead and tell you what I drew for speakers - it's probably hard to tell from the black rectangles :)
The fronts are a pair of Paradigm Premier 200B bookshelfs on short stands, so they don't look stupid up on that shelf. You might not even need the stands, if the 24" from the shelf gets the tweeters to your ear level. $1k/pair, 20% off right now so $800.
The matching 600C center channel is a BEAST and is also on sale for $800, front stage total $1600. I just can't say enough good things about this lineup, if you have a dealer nearby, go give them a listen.
The surrounds I've shown on swivel mounts turned inwards to face the seating. You can also aim them a bit out into the room for a less direct sound, but I find with modern receivers and decoders, this isn't necessary. I'd suggest a pair of Paradigm Premier 100B, $640 on sale for these, on a set of the sturdy and affordable VideoSecu side clamping mounts, $25.
Tops, again, Paradigm, this time the P65-R in-ceiling speaker. I'm actually suggesting these based on personal use. They are the flattest, best measuring speakers in my system, and never mind the aimable tweeters - these speakers are designed for good, even dispersion, and it's amazing how well they work. Aimable tweeters are there to make up for dispersion and placement shortcomings, and you will have neither if you go with the P-65Rs. Don't pay retail for these, ask the dealer for at least 20% off since you're buying a full set of speakers. If they say no, find another dealer. It's a poorly kept secret that Paradigm very seldom sells for full MSRP. Call it $500 for the pair.
For the receiver, I know people like to suggest buying a refurb from accessories4less, but I've heard too many horror stories about broken equipment and poor support. I'd suggest the X3500h from Crutchfield, a rock solid company that will have your back if anything is wrong with the gear. The receiver itself has plenty of power for my recommended speakers, and has the best version of Audyssey, XT32 - important to get the most out of your subwoofers in particular. The X2600h you mentioned only has Audyssey XT, which is rather inferior to XT 32. $600.
Totals, then, are:
65" LG C9 TV $2000
Paradigm Premier 200B Front L/R $800
Paradigm Premier 600C Center $800
Paradigm Premier 100B Surrounds $665 with mounts
Paradigm Pro P65-R Tops $500
2x Hsu VTF-3 Mk5 Subs $1750
Denon X3500h Receiver $600
Total before cables $7115
($10 subwoofer cables and any decent copper 14 gauge speaker wire are fine)
Now, all that said, I would strongly consider the 77 inch LG C9. You'd still be just under budget, and sitting as far as you will be, the extra size will really help the system come together. The only question is if you have enough vertical space over the center channel speaker. If you do, grab the 77" and don't look back :)
I also disagree on tops/Atmos not being useful if you only do sports and TV. Asides from native Atmos content, receiver upmixing with the Dolby Surround upmixer is really quite awesome. It adds an immersiveness to the sound that you just can't get with a 2d audio setup.
I love the look of the old rack systems. They may not have top of the line components but they still sound pretty good.
It looks like your setup was well taken care of! If I were you I would do the following:
Not a dumb question at all. Personally I don't agree with many of Logan's reviews/opinions when it comes to audio, but having a decent driver for your headphones/speakers is a great investment if you are an audiophile. [I think you are after something like this though. It is a very good unit.
I am sure others will also have input/suggestions but this is just one of the top of my head
An alternative is an internal sound card to drive your audio and a good entry level card that makes a world of difference over most onboard audio drivers is one of these.
There are alternatives to fit most use cases and budgets so if you want more info, feel free to ask.
It is worth adding that audio will only sound as good as the weakest link in the chain. If the initial quality/bit rate or the headphones/speakers aren't that good, purchasing a good driver will not make a difference. I can also expand on this if you want
Well, I don't know enough about amps to recommend you a perfect one. That's pretty cool that the E17K and K5 can dock. But you are pretty much absorbing the price for a portable DAC with a Desktop AMP.
You might do better with recommendations on /r/headphones though they don't really recommend Schiit much.
I myself, have an Earstudio Portable Amplifier. Basic 100 dollar, Bluetooth up sampling from 16 bit to 24 bit with 3.5mm Jack + 2.5mm Balanced Jack DAC/AMP portable combo.
However best part, for a 100 dollars you get a portable DAC/AMP (USB to USB including your phone/PC) and bluetooth to boot as well. I pretty much only got it for dual usage, it's connected to my PC right now via USB and if anyone calls me or play video from my phone, while connected, it diverts audio via bluetooth. Using it with the AKG K7XX, powers loudly to my PC and phone. Also has App control on smartphone, which almost no other portable dac/amp does except creative I think.
Anyways, whatever you choose, hope it goes well switching to new headphones. I have gaming headphones and pretty much just bought AKG for the experience. Everything sounds better at least.
That receiver is a good choice if it meets all your needs. There are certainly better receivers, but those added features don’t matter if you don’t plan to use them.
Bookshelf speakers can be fairly easily mounted. If you’re lucky, the speakers you decide on will have built in wall mounts. This isn’t super common anymore, but there are some. Another option is speaker stands, which are pretty straightforward. Lastly there are lots of speaker wall mounts you can get on amazon. I’ve used these wall mounts for my JBL LSR305 monitors which are pretty heavy and had no issues what so ever. They aren’t the prettiest but they get the job done cheaply.
Your room size is actually very close to mine. I too debated on what size speakers to get. I settled on 5.25” woofer bookshelf speakers and feel these are the smallest I’d go for this room. I think the next size up would be ideal, but if you have a sub you can probably do 5.25” no problem. It seems the Miccas are best served in small applications like offices, bedroom sized room. I can’t speak personally about them, but through my own research this is what I discovered.
I assume this is all hypothetical and you haven't bought anything yet?
Assuming you haven't bought anything...
If you're thinking of multiple people around the same desk, you may think of going for headsets. The Audio-Technica BPHS1 is way better than any "1337 gamer" headset out there and is basically a ATH-M40x with a dynamic mic attached. Earpads meant for the M40x/M50x fit too. Pads from Shure are good here, Brainwavz not so much.
This will definitely be the cheaper option but there are still some newer stereo receivers with phono inputs. I have an Onkyo TX 8020 and it has a phono input. Looks like all/most of the Onkyo stereo receivers include a phono input.
But yeah OP, check your local Craiglist/Kijiji/whatever, people sell their older receivers for cheap all the time. That will definitely be the cheaper option if you are okay with going used. Receivers tend to age pretty well, just check to make sure it works.
EDIT: pretty much all receivers will have a headphone out on the front. It's often a 6.3 mm, but you can pick up a 3.5 to 6.3 adapter for pretty cheap.
As for aux in, a lot of stereo receivers will only have RCA inputs, but you can also pick up a 3.5 aux to RCA cable for cheap too. Something like this: https://www.amazon.com/dp/B01D5H8JW0
Ooooo, yay I can actually contribute to something on here. So I basically had the same problem but I think it was a comfort thing in general that I wasn't happy with. I decided to look into some mods to improve the comfort and ended up going with the Sennheiser headband pad that you can get anywhere on Amazon really and some new ear pads. At first I was skeptical changing the pads cause I knew it would change the sound signature but after searching for awhile I found one person that actually did this and went with a hybrid pad. This was my initial thought cause I like the feel of velour on my skin but it's able to keep some of the lows with the pleather around the side. The guy who did this said it actually made them sound better by bringing the mids forward without changing anything else really ( if I remember correctly) and felt much more comfortable. So I decided on buying them and I can attest to them feeling way better and I actually agree with them sounding better too. The mids are definitely better and the bass is recessed ever so slightly but overall a must upgrade if you're unhappy with the comfort.
Brainwavz Hybrid Memory Foam Earpad - Black PU/Velour - Suitable for Large Over The Ear Headphones https://www.amazon.com/dp/B00ZGGG3KY/ref=cm_sw_r_cp_apa_5KE4Bb714QMK3
The PS4 only supports digital connectivity (old school analog A/V plugs have finally bitten the dust). So for video, it sounds like you're good -- HDMI will work great, as you mentioned your monitor supports it (alternatively an HDMI to DVI setup would also work for a monitor).
But for audio, that's another story... The PS4 uses digital / optical audio cables (also known as a TOSLINK connection). You need a decent speaker system for this type of connection. You mentioned that your monitor doesn't even have speakers (does it have an audio out port though? if so, you may be in luck and can just plug a pair of cheap computer speakers or headphones in). Otherwise, you pretty much only have three options:
http://amzn.com/B004C4WPXA), along with a digital / optical (TOSLINK) audio cable and an [RGB-to-headphone style adapter](
http://amzn.com/B000I23TTE). From there, you can get a cheap set of computer speakers (even something simple like these would work). Attach the cables together and plug in the speakers and boom -- you'll have sound. (Note: if the PS4 is anything like the PS3, you'll need to enable "multi channel output" under its sound settings.)
http://amzn.com/B002V3R2SM) I could find on Amazon that supports it -- it's a surround sound / DVD Player combo, in case you're interested.) You'll also need to buy a digital / optical (TOSLINK) audio cable, of course, which I linked to in the above example.
I have refurbished / reconditioned or otherwise repaired just about every component in my theater. The KEF speakers are all same era and generation, plus or minus a few years.
Front Channels: KEF 103/4 Reference speakers - owner replaced foam surrounds on the internal push/pull woofers - and I refurbished the ferrofluid in the tweeters. $175 off craigslist
Center Channel: NOS (new old stock) KEF Model 100 - found on craigslist. Someone found it in their garage, sitting new in box for 20 years. Refurbished the tweeter (ferrofluid replacement). $60 off craigslist.
Surround Channels: KEF C55 speakers that I found at Goodwill for $20. Complete cleanup - ferrofluid treatment of tweeters. Great condition otherwise.
Rear Channel: KEF Model 90 "center channel" speaker - bought this before I found the Model 100. Roughly the same speaker, but smaller tweeter than the model 100. Tweeter refurbed, cleaned up inside and out. I went with a 6.1 configuration because my room wouldn't benefit much from 7.1 - and the window placement made that difficult. Mixing 7.1 down to 6.1 doesn't change much. $40 off Craigslist.
Subwoofer: PA-120 Premier Acoustics 12'' Subwoofer had this sub for 8 years now, and love it to pieces. Very punchy, very powerful, very affordable. Weighs a metric ton - and customer service was top notch. (Amp malfunctioned after 6 years - got a new one from them free of charge).
Surround AV Receiver: Marantz SR6008 receiver I bought for $200 on ebay because it was 'for parts/not working.' The HDMI1 output (there are two) was burned out. Bought a new HDMI board from Marantz for a hundred bucks and the thing is good as new.
Speaker Mounts: The left C55 surround and rear channel are on custom made speaker mounts - the rear is half custom - mounted to one of the speaker mounts I got from Amazon.
Projection Screen: Custom 105'' Screen Frame and made from a canibalized Da-Lite screen I got for free from work. (was hiding in the plenum when we purchased our office space.
Projector: Benq HT1075 - bought new, because it's already so cost effective. Found it on sale at Frys for $699 a year ago. Very happy with this little projector.
Theater/Home Automation: Home Assistant running on an iPad 3 in the theater room. The iPad was sitting in a drawer, not in use for at least a year, and found an OEM apple dock for $5 on ebay for when it's not in use. I can control my Smart Things devices (z-wave dimmer) - MiLight LED strips behind the screen, in the EXIT light, and the bulbs in the uplight/spotlights in the room, I also integrated Broadlink RM2 support for controlling cheap 433mhz outlet switches for the air purifier, popcorn machine, and whatever else I need to control.
Movie Posters: Marketing department had a bunch of these frames in storage from an old PR campaign. Tore out the foamcore inserts, found high res posters, and ordered them on this silk-like fabric directly from China for $9 a pop. They look incredible up close, almost lithograph-like.
RGB Lighting: Generic RGB Strips I bought for $5 a pop on price mistake with Milight RGB controllers. Milight 9W RGBW bulbs I got for $13 each in $15 brushed steel uplights from Lamps Plus. All controled with the Milight WiFi controller through Home Assistant.
Seating was transitioned from the living room when we bought new sofas - raised the rear seating on 10'' platform. 12GA Speaker wire from my local wire wholesaler (similar price to monoprice). Looking for some carpet options - and have a lead on a local seller of OC703 for acoustic panels.
It's come a long way in a year - here's a before and after - December 2015 and April 2016 -- not the most recent, obviously - but I'm very proud with how it's coming together.
Hello guys, First of all, idk if this is the right place to post this but i am going to try and hope you guys can help me becuase the guys at r/buildapc couldn't help. Here is my original post at r/buildapc https://www.reddit.com/r/buildapc/comments/4b8mgm/recording_audio_not_working/ . This post has my pc build and the statement of my problem.
Restatement of the problem from my other post: I built my pc last summer so it has probably been a good 10 months since i had it. After a few months of gaming, i finally play a game with my friend and then just noticed that the recording audio doesn't work. Not on skype or any other platform. I tried a whole bunch of stuff to try to fix it like going through the audio settings in windows 10 and reinstalling the realtek drivers. I even bought a headset splitter to see if that was the problem. This is the headset splitter http://www.amazon.com/gp/product/B0058DOWH6?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 . All the wiring in my motherboard seem right so idk what could be the problem. Any ideas guys?
If you guys can help that will be great. If not can you guys recommend me a cheap DAC or soundcard to buy becuase i got pretty cheap headphones so i dont need anything significant. Headphones: meelectronics air-fi af32. I would rather get an internal soundcard so i can just leave it in the case and not worry about it but i would still like to use the front speaker jack on my case, would the soundcard let me do that or would i have to use the speaker jack on the card. Any info would help. Thank you so much.
I live pretty close to the corner of Fairfield and Gulf Beach, so I wouldn't say that makes me the definitive authority for the West Pensacola/NAS area on antenna television, but I think it makes me pretty close to being an expert on the subject.
This is the model of antenna I have, made by Terk. The main element is relatively average in size, as illustrated by the picture taken with the water bottles. If I were to estimate, though, I would say it's about 12" tall and 18" wide and deep. The "rabbit ear" elements, though, are inestimably tall. It sits on top of our rather large (6' tall) entertainment center and easily can touch the ceiling with them. Fully extended, though, they're probably about 36" long, each.
Now for what matters: reception. In all honesty, it's not entirely bad. I regularly receive: 3.1, 3.2, 5.1, 5.2, 5.3, 15.1, 15.2, 21.1-5, 23.1-4, 33.1, 35.1, 35.2, 42.1-3, 44.1, 55.1, 55.2, and 58.1. All-in-all, not too bad. Now for the bad news: there are a couple of channels that are intermittent, if present at all. Fox is one of those channels. As a fan of football, this infuriates me! So I researched the signal levels for our area. Alas, Fox is one of the weakest stations for our area. It's based out of the west end of Mobile. So, unfortunately, if you're like me and are craving any shows from Fox (like my fiancee does for Glee), you're going to have no choice but to go with an outdoor antenna.
If you want to shop for that locally, try RadioShack. Truthfully a great selection there. Otherwise, every review I've gone over has pointed that the model of indoor antenna I have is one of the best on the market. Good luck out there!
Harmony Remote 650 or 700. They are identical, except the 700 is rechargeable (both use AA batteries, but the 700 has a built-in charger). The 700 has been discontinued but you can still find them pretty easily.
Harmony 650: http://www.amazon.com/Logitech-Harmony-650-Remote-Control/dp/B004OVECU0
Harmony 700: www.amazon.com/Logitech-915-000162-Rechargeable-Discontinued-Manufacturer/dp/B004OVECUA
I have one of each and have been really happy with them -- I'm using them with Roku 2XS, Roku 3, Samsung TV, LG soundbar, Sharp TV, a set-top digital antenna box, my XBOX360, bluray player, air conditioner, etc... it's all programmable via a webapp and highly customizeable as well.
The Harmony series operates a little different from "normal" universal remotes. Once you have your devices defined, you create "activities" that use them. Push the button for an activity and the remote figures out what settings need to be applied. IE "turn the TV on and to HDMI1, switch the soundbar to optical2,set the volume controls to soundbar, the menu & arrow buttons to ROKU, and dim the lights to 40%" -- it makes it REALLY easy to use.
Ok. So you don't need to push a ton of wattage through your mains and a decent, but not insane, sub will do.
My, personal opinion, recommendations.
Receiver(In no order. These are just brands I respect with good enough features and wattage):
I have always had good to great experiences with the above brands. If looking stylish is at all important, do the Harmon Kardon. Also, in my experience, HK power is very very clean. All of these include wireless networking and HDMI switching. I would buy the denon personally. But, I'm biased towards denon.
Subs:
When it comes to these two subs, it's a crap shoot deciding which to get. Velodyne and Klipsch subs are both fantastic. I'm leaning, personally, towards the Velodyne. But that's just me.
So, in conclusion, you had a budget of $800 dollars. If you did the Denon or Onkyo and one of these subs that puts you at 650. As a bonus, here's a used KEF center channel for 150 bucks on Ebay. It would give you 3.1 channel.
http://www.ebay.com/itm/KEF-HTS3001-Piano-gloss-Black-2-Way-Uni-Q-3000-Series-center-channel-Speaker-/281195898826?pt=Speakers_Subwoofers&hash=item417894e7ca
Also, do yourself a favor and get something similiar to this:
http://www.amazon.com/Logitech-Harmony-Remote-Control-Silver/dp/B004OVECU0/ref=sr_1_1?ie=UTF8&qid=1383164516&sr=8-1&keywords=harmony+remote
It will replace all the remotes in your system and make switching from TV->Games->DVD much easier with Macros.
Find out if your local public library uses Hoopla (a Netflix-like service that has movies, TV shows, audio books, etc.) and if it does, get yourself a free library card and you will have a nice library of movies and shows at your disposal. My local library just became a part of this last week so I've only begun exploring it, but it's pretty sweet. And free.
If you have a friend who has Comcast or a similar cable provider, ask nicely for their log-in and you can stream some live cable TV channels and have access to almost-full current TV series. My father was kind enough to lend me his username and password, but I admit that I rarely use this for anything other than watching films that haven't yet arrived on Netflix or Amazon Prime.
And, obviously, get yourself an OTA. I have this one on one TV and this one on another TV. Both are great, and both are inexpensive.
Just launched a balloon this week using this set-up. It worked beautifully. I'm assuming you're following the makezine article? If so, be careful to adjust the values of a couple of the surface mount resistors in the software because the trackunio expects values of like 10kOhm and the article lists like a 6.x kOhm one. There are variables to do so either way.
A few quick notes: learned the hard way, it's better to over-inflate your balloon than under inflate it. A difference in 1m/s ascent rate can have big effects on your time to go retrieve things. It pushed us into a really heavily forested area and made retrieval hard. I'd make a complete dummy payload that you attach to your filling apparatus, so when that lifts off the ground, you know you have the right mass + free lift. Then remove the dummy payload and attach your real flight line. It can be hectic at launch but our transmitter worked for much longer than the 4 hour duration of the flight (used disposable AA lithium batteries) so you've got some time to go. Likewise, our CHDK hacked camera worked well past landing. Patience at launch will save you frustration later.
Secondly, the trackunio code we used wasn't well configured when it comes to repeats. I thought I had fixed it but apparently I didn't flash the most recent code over to uno. Anyway, we ended up asking for repeats through the whole flight, and not just when we were less than 5kft above the ground. I feel pretty bad about this because balloons cover a big area and I don't want to clog up 144.390. In hindsight, I should have tested this by setting my threshold below my current altitude when I was driving around.
For recovery, i found typing the exact lat/long (in hours, min, sec) into http://www.sygic.com/gps-navigation and putting it in pedestrian mode to work beautifully. Got us to within 50 feet of the balloon, with a countdown of how far away we were. This was great.
While I used aprs droid to decode things out of my 2m radio, I actually got better performance from a cheap sdr receiver and gqrx. We didn't fail to decode a single packet with that set up and a cheap magnet mount 2m antenna, while APRS droid + the dedicated radio missed a couple. I'd highly recommend the little dongle if you don't have one. They're loads of fun outside the ballon.
Finally, just in case you've not seen them balloon performance calculator and landing predictor.
The MSR7s are my favorite closed cans, and ive tried a lot. The clarity is astounding for a closed back, and almost as clear as my HD600s. I don't find them sharp either. Remember this, the headphone will only sound as good as your source. I use an audioengine D1 dac paired with my MSR7, and using a amp/dac combo will bring out the best in them, tighting up the highs and giving you slightly more detailed bass. If you use spoitify, make sure you enable high quality, or download some flac files to really see what the MSR7 can offer. When done right you will love them. These are some of the most accurate cans you can get for under 400, (excluding the 600s) And yes, the comfort is way up there in the top of closed back cans. Remember, the source of your sound is VERY important!!! Youtube songs will not do!
https://www.amazon.com/Audioengine-D1-24-bit-Digital-to-Analog-Converter/dp/B006IPH5H2
I started out in search of a wired Bluetooth cable for my ibasso's and ended up getting This one off ebay. For $30 i'm quite happy with it. Build quality is good, memory wires are great and battery life is excellent, but the bluetooth calling has some static glitches when adjusting volume and the call quality is shrill at times, this could be my Ibasso's though. The Mic seems to work well even when it's behind my ear. The manual says there is an AI voice, but mine just beeps. If i didn't know better i'd say this cable has the same chipset and software as Taotronics TT-BH026US I returned before I started focusing on sound quality ;-) It beeps between songs, when adjusting the volume and between chapters of Audiobooks, which is annoying, but not a deal breaker. Also, I just purchased the EarStudio ES100 It sounds fantastic!! The sound quality is almost indistinguishable from a wired connection using ibasso it01's and UE Tri-Fi 10's and it sounds much better than wired directly in to my iphone 7 plus via lightning to 3.5mm. It supports (AAC, AptX, AptX HD etc. and it's tiny. The app is also pretty awesome, shows streaming bitrates and which codec is in use. There's also a feature to allow ambient noise in via the mic on the unit. My only issue with it is where to place it on my body so the mic is close enough to use for phone calls.
Btw, nice effort on the è but you want the other one: fiancé
It's easy to remember: é the stripe goes on and so does the sound. è the stripe stops and the sound is short
Everyone here is making this so unnecessarily complicated. I just picked up DJing last year myself and it's not hard to start at all. I did quite a bit of research on what DJ controller would be the best for someone who is just starting, but also wants to have something more than a simple mixer.
Good luck and have fun! It's a blast to get into
I FORGOT you obviously need a laptop and some speakers. Any speakers will do, just make sure it's RCA output. Here is a cheap converter if you currently have a 3.5mm output.
The video I linked is the raw livestreamed video, no re-uploading or editing from a vod. I livestreamed it on YouTube and after the stream it was saved onto YouTube like that.
I use GPU to record and CPU to stream. Since my GPU is significantly more powerful than my cpu.
The recorded footage, I was going to use as a backup in case something went wrong with the livestreamed footage for whatever reason. Like a bunch of dropped frames or something. But that hasn't happened yet.
My cpu usage when streaming is only around 51% and GPU usage is only 20%.
I have a hard drive that is literally only used for recorded footage. It is fragmented but that's fine because the footage doesn't need to be defragmented. If the footage gets used, it'll only be thrown into Adobe premiere, edited, uploaded, then deleted from the drive. No use in keeping it around if it'll be on my YouTube account forever. But recently I haven't had to use the recorded footage because the livestreamed footage is good enough.
Hope that helps answer your questions! Not trying to debunk anything you're saying, just giving more intimate details about my setup!
I do use a hdmi splitter inbetween the HD 60 pro, ps4 pro (any console for that matter), and my monitor. But that hasn't been an issue for months. I think the purpose of it, if I recall correctly, was to use it to record / stream older consoles like the Xbox 360 with the HD 60 pro. And it works very well for that. So I just kept it in the hardware loop. This is the one that I'm using: https://www.amazon.com/dp/B004F9LVXC
I hope that helps you guys help me!
Maybe I didn’t spell it out easy enough for you or explain it well enough for you, or maybe you simply didn’t actually read what I wrote. So, let’s try this again.
There is NO quality loss with the es100 or any of the FiiO Bluetooth receivers. Quite the opposite. They have a built in AMP(this AMPLIFIES the sound and outputs more power to drive the headphones better), and on the es100 a DAC chip(Digital to Analog Converters that increases the sound quality). So it takes the Bluetooth signal and enhances it greatly. It sounds significantly and noticeably better and louder, than if you were to take the same set of headphones and plug them directly into the phone with the provided lightning to 3.5 headphone jack dongle. It also sounds way better than a set of Bluetooth headphones. Believe me, I have 4-5 different high-end Bluetooth sets, and have tried out all these different situations. Some of them sound ok, but don’t really get loud enough, and you lose a lot of detail in the music. There is no comparison to the es100 or Fiio Bluetooth receivers. They sound amazing! And you still have your phone wire free. The only thing that is wired is your headphones to the tiny Bluetooth receiver which you can just clip to your shirt or put in pocket.
Plugging directly into most phones sounds like shit. Phones don’t output enough power to really drive a decent set of headphones. So they also does not get loud enough for me personally.
If your someone that is content listening to music with the set of pods that come with the iPhone, then these devices are probably not for you. I myself have quite a few sets of headphones that require a cable, and I was pissed that I was basically being forced to use one of these dongles to keep plugging them directly into the phone, or use Bluetooth headphones. The dongles I kept losing/misplacing because they are so damn small and they are expensive to keep replacing, and I didn’t want to use Bluetooth headphones as the sound quality isn’t the best. Especially since Apple uses only the AAC codec and not better ones like aptx, aptx hd, or LDAC. So it forced me to look at different options and the es100 was the answer. I didn’t know how much I didn’t like plugging directly into the phone via dongle until I used this thing for a few weeks. Music that I have been listening to for years, all of the sudden sounded better, more alive. I was hearing micro details and sounds that you just usually couldn’t hear. It’s amazing!
Best $100 I ever spent. I know that that could be too much money for some folks, but it’s about the cost of a few of the Apple dongles! If $100 is too steep, the FiiO options uBTR is $28, the BTR1K is $50, and the BTR3 is $70. They can all be found here:
https://www.amazon.com/FiiO-BTR3-Bluetooth-Receiver-Portable/dp/B07FVN14FH/ref=mp_s_a_1_1?ie=UTF8&qid=1549717742&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=fiio+btr&dpPl=1&dpID=31GuLdGu5jL&ref=plSrch
Es100:
https://www.amazon.com/EarStudio-ES100-24bit-High-Resolution-Bluetooth-Unbalanced/dp/B078H4YD2L/ref=mp_s_a_1_2?ie=UTF8&qid=1549717742&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=fiio+btr&dpPl=1&dpID=31e1njGDDpL&ref=plSrch
Just so people know, I have no affiliation at all with either of these companies. Just products that have helped me get over the lack of a headphone jack on iPhones. And not having your phone connected to any wires is amazing. But you still get amazing audio quality which is important to me. Hope this helps some and clarified what I was trying to get across in my first post. Or not...
Ok, here's a plan that will cost you NOTHING if you don't like it.
Assumption: Your TV has an HD Tuner built-in, this is key. Let me know if you need more clarification on this.
Go somewhere and get an "HD Antenna." They range from thin indoor panels to big gaudy outdoor arrays. Make sure they have a powered amplifier as well (think most do). I would recommend a store first, so you can try one (smaller/cheaper), then take it back if it doesn't work out and try another, once you've found the perfect one, either keep it or buy it online for 50% of the store cost. There are a LOT out there, and the right one depends on a LOT of variables (elevation, obstructions, interference, etc). I have the Terk Klingon Sword looking one. It's more of a directional antenna, but works fine pointing North to split the difference of the two closest sources. I have mine pointing out a window, and then have it plugged into the the main splitter of the house (outdoor TWC junction box) to feed to all my TVs. The good thing is, you only need one antenna. Point it where you think first, then do a channel scan. Your TV should have a signal meter. May take two people yelling if your antenna is far away from your TV. Too far one way may mean Channels from the East coming in great, and Channels from the West not coming in at all. Fine tune and then repeat the channel scan to find the sweet spot! It may take a couple hours, but just think of the pleasure you'll get from never paying for cable and calling TWC up to tell them to go Fuck themselves!
Just message me if you have any more questions or need more details. I have 4 HD TVs and they all receive CBS, ABC, NBC, FOX, PBS, WJZY, UNC, and more off that one antenna.
Also, don't get too discouraged if the first one doesn't work worth a shit, I tried a flat panel one first and it wasn't worth a SHIT. Then I tried another terrible one with the same result. Good Luck!
My 2 cents for a $1500 budget Coffee Shop...
I recommend mounting these brackets up-side down so you can aim the speakers down at costumers. (presuming you have high enough ceilings to support it)
$80+100+100+230+30+500+320+140=$1500 ON THE NOSE!
I'll just mention stuff I've tried myself.
If money is no object, multiple monitors or at least headless ghosts are ironically useful in virtual desktop applications like Bigscreen. I run 3x2560x1600 in one large screen. Bigscreen has an update coming for multiple monitors too. Big physical screens are nice for spectators/multiplayer.
Until the wireless adapter comes out, a decently long displayport cable and longer USB cable running to the link box to cover the large play area and if you have an original Vive, the new 3-in-1 cable with a sleeve.
I've been looking at [this overhead pulley thing](https://www.amazon.com/MDW-Retractable-Management-Headset-Adhesive/dp/B01M6EB8DM/
) but I haven't actually tried it yet.
Two Vives would be good, you can run them off the same 2 base stations and partition the space with chaperone. I run a Rift and a Vive in the same room.
Get an assistant/intern/wife/child to help you set up/put things away, maintain everything, patch/update, find new content, etc...
Accessories:
You might want a good recording setup with mixed reality support as well.
e: stuff I forgot
Not sure why you would want the l/r and the center, other than it's a good deal. Are you hoping to fill it out to 5.1 eventually?
I've never heard Fluance, but the go-to recommendations around here are one of these two Pioneer speakers, or the Miccas. Search this sub to look for reviews (and double check the model numbers if you're interested. I'm doing this from memory). If you get the Pioneers you should be able to afford the subwoofer that goes with it. Also, you can usually find a Polk sub like this one on sale.
There are better options, I'm sure, but these get a lot of recommendations for budget systems. I have a brother in law with the Pioneers and no sub and he's pretty happy.
As for hooking it up, you just need a 3.5mm to RCA jack cable like this one. Also, if your receiver has an s/pdif input you could go from the sound card to the receiver that way. If you use the first cable, the sound card will be decoding the digital into analog. If you use the s/pdif cable, your receiver will do the decoding. Depending on the DACs in the card and receiver, one might be better than the other.
I used these mounts in my home office (which is a bedroom) with a pair of Micca MB42X bookshelf speakers. The room is 14x17. Ceilings are 9 feet. I mounted them with the arm 16 inches below the crown moulding. They mounted with two wall anchors a piece. Took longer to measure and mark the wall than it did to hang them. Less than an hour in total including putting the wired speaker in them.
They hold the speakers with tension so you don’t have to put screws in your nice speakers. You turn a screw on the mount and the sides squeeze the speaker base with rubber lined jaws. That’s nice because you can change your speakers in about five minutes when you want to upgrade. Just need a screwdriver and a chair to stand on.
They have angle adjustment, but not enough for my room. I put a black rubber doorstop under each speaker and it worked fine. Can’t even see them because they match the speaker and mounts.
You can run the wire through the mounts if your wires are in the wall and you want that super clean look. I didn’t do that because we had just painted the room a few months prior and I didn’t want to cut into the sheetrock. I’m going to do that if we decide to stay in this house a few years.
I’m really pleased with them. They look nice. I’ve had lots of compliments on them. They were easy to put up. I have absolutely no room for floor or tower speakers and these worked perfectly. I couldn’t have speakers in this room without them.
https://www.amazon.com/gp/product/B000X9O8SI/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
Welcome to the sub! Congrats on passing your Tech.
First up pick up an RTLSDR, these are great little receivers that will cover 30MHz-1700MHz which covers a tremendous swathe of spectrum. Definitely check out the different types of antennas you can make over on Antenna-Theory, the RTL-SDR blog and /r/rtlsdr
Then if you want to transmit on the post popular amateur bands for techs (which are local to your area) pick up a VHF/UHF Baofeng radio like a UV-B5, UV-82 or UV-5R. Not a whole lot of difference between any of them; I think the UV-B5 is the better one, since it has a better antenna and a rotary encoder. But it's very much up to you as to what you get (style > substance after all :) ).
Now from there its a question of what where you are. City? Rural? Nearby airport? Ports or ocean?
Edit: I should start linking to the wiki more often: Baofeng radios and Your First Radio are good places to start.
Absolutely, and I don't think it would look bad with black pads on white headphones personally.
Here are the ones I bought. They took a little effort to put on there, but are very snug and don't move around. (The amazon picture isn't correct, as it looks like they are the plastic/leather pads, but what you get is the velour) http://smile.amazon.com/gp/product/B0016MF7W2/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
These Shure pads apparently work as well, although I don't have any experience with them. Looking at the reviews they seem like they fit a little bit looser and can freely spin a little bit. http://smile.amazon.com/Shure-HPAEC940-Replacement-Velour-Headphones/dp/B005OM06RG/ref=sr_1_1?ie=UTF8&qid=1395931310&sr=8-1&keywords=srh+840+velour
When I get home tonight, I can take some pictures of them on my M50's if you'd like. I love them and well worth the $20 I say.
> so I picked up a cheap indoor antenna
This is why you're having trouble picking up local stations.
Cheap antennas are only good in two situations: Either you live right next door to the only television station you want to watch, or you need to hook something up to your TV in an emergency (power outage, moving and haven't set up cable service yet, cable outage, etc).
If you're going to use an antenna as your primary source for television, you need to invest in a good antenna. A $15 indoor antenna might've cut it decades ago back when there were only three channels and no wireless interference from things like cellphones, microwaves and home routers, but they don't cut it anymore.
[This Terk amplified antenna] (http://www.amazon.com/Amplified-High-Definition-Antenna-Off-Air-Reception/dp/B0007MXZB2) remains one of the best on the market. You can pick one up at Fry's or Best Buy for around $80, or on Amazon for $40.
You mentioned you live in an apartment and, unfortunately, this alone could limit your ability to pull in certain channels. Since your apartment tends to face only one or two directions, your line of sight to the broadcast towers for your area could be really limited. The good news is you're well within your right to put an antenna [like this one] (http://www.amazon.com/dp/B007VTXUJ6?psc=1) outdoors. A landlord can only restrict what you attach to the building, so how you put it up is something you'd have to think about.
Last, are you sure your complex doesn't receive basic cable for free? A lot of landlords cut deals with the cable company to provide basic cable to tenants for free, mainly so the landlord doesn't have to deal with antenna and satellite dish issues. If you receive basic cable, it would solve your issue of getting some of the networks. If not, I'd highly recommend the Terk amplified antenna linked above.
Thanks! I love the HAF 912... good airflow, lots of space, and it was easy on the wallet.
The headphones are actually a pair of Panasonic HTF600s with Beyerdynamic velour pads installed. I first heard about them on Head-Fi (audophile website, I'm not an audiophile but I was in the market for a new pair of headphones and they have a lot of trustworthy reviews) where they were rated pretty highly. They sound pretty awesome and feel great on the head.
http://www.amazon.com/Logitech-Harmony-650-Remote-Control/dp/B004OVECU0/ref=sr_1_1?ie=UTF8&qid=1414427392&sr=8-1&keywords=logitech+universal+remote
that is the most popular logitech universal remote on amazon. Regular price is $90. Sounds like kinect is on par with the cost of a universal remote but instead uses ultra useful voice commands and also turns your smart phone into a universal remote. Sounds like a great deal and great value for only 100 bucks
I read a lot about separate amps and DACs but I wanted something portable and cheap and easy. I'd been looking at the the EarStudio ES100 which is $99 but while at the Brooklyn aloft hotel one night after getting tipped at King's Theater, my phone popped up that it was on special for $74.25 and I went ahead with the purchase
I hadn't realized this at the time the ES100 started as a kickstarter to have studio level quality and it exceeded my expectations. My only gripe is that every time I plug it in or unplug it, it turns on and I have to hold down a little button to turn it back off. I miss old fashioned on/off toggle switches
There's an iPhone app where I can EQ it to take advantage of my headphones (lots of BASS)
I still have a wire from my headphones to this little thing and I also have a conversion cable 1/4" to 3.5mm or whatever. Ideally a high quality bluetooth receiver like this would be built into my headphones but I'm guessing that professionals don't take headphones seriously if they come with bluetooth built in
anyway, I highly recommend if to anyone that loves music without any sound limitations
cheers
They're light and you can adjust their clamping, and they might be the best you can do in your budget. Which, and I'm being blunt here but it's the truth: your budget doesn't really afford you the opportunity to be picky here. You could buy the Monoprice 8323 and add Brainwavz velour ear pads or these Beyerdynamic ear pads (http://www.amazon.com/Beyerdynamic-EDT250V-Headphone-Pads-Black/dp/B0016MF7W2) and get more comfort, but you could be spending more than the headphones themselves (on Monoprice for $16, more on Amazon) for the ear pads. Same situation with the KSC75, they're $15 and use the same drivers as the PortaPro, but more comfortable quality ear pads seem to run as much as they do. Maybe that's worth it to you. But I think your money's best spent buying the best sound quality you can and dealing with whatever annoyances may possibly exist.
Yeah I actually really enjoy bass but not when the mids and highs are suffering from it. But yeah on the 18s 100% would say to not hesitate to pick these up. Overall they feel on the flat side which is a good thing to me, very authentic. I feel like I'm hearing exactly what the recording engineer intended for me to hear in incredibly clear detail. With none of the bass issues I felt with the 11's even though the bass and sub do show up when they should. Love Them!
Also I use the Ear Studio Es-100 because I really wanted a decent wireless option. Good Luck picking a pair of monitors! Post them when you get them!
https://www.amazon.com/gp/product/B078H4YD2L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
put a ball point pen in your mouth and close your eyes and you should be able to see everything perfectly... changing stations i can't help you with.
​
problem you have is you are just a few miles from some strong broadcast towers and you want to pickup stations at a long distance. and this won't happen normally and the use of an amplifier will wipe out all your signals because you will overload your tv set's tuner once you go over about 90db
your only hope to pick up baltimore stations is to point a directional antenna northeast at baltimore
see but look at your signal strength .. for DC you are in the mid 70's db and for baltimore you are in the 35's
it is like twice as strong and the DC stations are close to the top margin where you overload your tv's tuner.
Remember these signal levels are only approximate but your distance of 2 to 4 or so miles says $10 rabbitear antenna is all you need.. but baltimore might not be an option .. I think unfortunately all you are going to be able to pickup are the stations that say GOOD on your Rabbitears listing
try something like this
https://www.amazon.com/RCA-ANT111E-Digital-Antenna-Non-Amplified/dp/B000HKGK8Y/
or maybe something like this pointed northeast at baltimore
https://www.amazon.com/Channel-Master-STEALTHtenna-CM3010HD-Antenna/dp/B00PKLOA7I/
​
I am in delaware and I try to get Baltimore and Philly and .. I am equally about 50-60 miles out and I use huge antennas and the strongest amps you can get.. and it is rough getting signals from 2 markets because
​
Look on your tvfool report... see all the A and C boxes on the left of your table readout .... that means those channels have interference from other stations that are nearby .. meaning trying to get both DC and Baltimore might lose you every station with a A or a C red box... Or maybe not.. you never know until you try..
but I have those problems where I live and some days its just a crap shoot as to which tv stations are going to be available.. and even the really strong 5 out of 5 bar stations get knocked off.
​
so yeah .. its cool .. give it a shot.. im just saying don't be surprised heh because it can get weird trying to do what you want to do.
good luck
So, lots of information there, you've got some god questions.
In regards to the headset, you're right that a 50Ω set really shouldn't need an amp on its own to power them to a sufficient volume out of a computer. The reason to get a DAC/Amp would be to get cleaner sound from a discrete piece of hardware. If you aren't looking for ultimate sound quality out of your headset, you're probably fine with the outs on your PC (As unpopular as that opinion is around here, it's true). You can always try the headphones out without an amp, then if you're hearing hissing or lack clarity with your PC headphone out, then you can get a separate DAC/Amp and split the mic out using something like this.
In regards to the surround sound, I would probably save some cash and go with two sets of LSR305s rather than a set of those and the Logitech system. This way you can tune the speakers for your room individually, and I'm certain that the 305s are much higher quality than the Z906, even without the sub. The only hitch there is that you won't have a center channel, but many of us here use a phantom center provided by the front mains rather than a dedicated center channel.
You might need some fancy switchgear to have your audio interface connected at the same time as your surround sound, and all of that, but if you can sort that out, I think having quadraphonic 305s will sound better than the Logitech system.
Also, you can probably use your audio interface for whatever second set of headphones you go with, save a bit of money there. If you do go with a separate DAC/Amp for the second set of headphones, I've really come to appreciate the price/performance value of my Modi2u. I've returned higher priced DACs because I just couldn't tell the difference, or thought they sounded worse. It's a matter of preference, though, so demo what you can.
Hope that helps!
I know that if you get teh M-50 this might be out of your price range. but The Audioengine D1 DAC I've heard is pretty good.
Plus on amazon, someone already had the Fiio E-10 and is comparing it between the two. It should be the top comment. http://www.amazon.com/Audioengine-D1-Premium-24-Bit-DAC/dp/B006IPH5H2
theres a Massdrop for the Audioegine D1 DAC for 100 dollars. basically a group buy that passes the savings onto you. normally it cost around $150. https://www.massdrop.com/buy/audioengine-d1
Again, I think you're good with the headphones alone, but if you want the DAC, thats a pretty good deal for a pretty solid DAC.
I'm going to suggest a few things because your setup has a lot of potentials. First, mount that CRG9. That behemoth is a great monitor but the stand just takes up too much space, once you mount it, it will give you an unbelievable amount of desk space. Second, drill a hole and route your mouse and keyboard cord thru it. Also, get something like this to hang your headset underneath the table. Last but not least, put some pictures or your collection or what not onto the wall to make it more personal. Afterward, your setup will look much better and super clean. Hope that helps.
Does it have to be motion control? My experience with them has been that they're awful to use. I find a touchpad works a lot better. Maybe you've a different use case than I do.
I use something like this. They can control volume just fine, but you'll need to make sure HDMI-CEC passthrough is enabled on the Shield, and whatever equipment you have for audio accepts CEC. I, personally, do not like CEC because it can often get confused and start turning off the wrong thing, stuff like that. I have older components though, so maybe it works better on newer stuff?
I used one of those controllers for Keyboard/Mouse struff. But I use a Harmony remote for most stuff. I don't need the keyboard/mouse all that frequently so it just sits on the end-table. The Harmony remote controls a Flirc that's plugged into the Shield. Between the Harmony Remote and the Flirc I can use the remote to do just about anything. It's really amazing. You can even macro multi-key commands, assign them to a specific key, you name it.
Harmony has some newer remote systems as well. They look like they could do just about anything, you might want to look into that.
Lastly, Google's Android TV Remote App has a touchpad to.
Again, if you really need motion control, I'm not sure. I've not had luck with those.
If you're opening up your ceiling to run wires and install speakers, depending on how the floor joists are (engineered vs straight up 2 x 8's) you may want to think about blown in insulation to help with noise transfer to the rest of the house.
> but any other suggestions for good looking sound proofing would help.
Check out http://www.soundproofingcompany.com/ they do free reviews/estimates to help give you an idea on what is feasible and what you can do.
As a side note, acoustic panels are less about sound proofing and more about fixing room acoustics (echos, bouncing).
> I do want Dolby Atmos and DTS:X capability but was not sure the best setup, looking at either a 5.1.6 (all 6 ceiling speakers) or possibly doing a 7.1.4 (setting 2 of the 6 ceiling speaker listed as mid-highs possibly?)
Just be aware that 6 channels of atmos is expensive, you're looking at something like the Denon X8500 to do 6 channels of atmos right now. Your 7200 can't do 6 overhead channels, maxes out at 4.
If you're hiring someone, wire for everything (Top fronts, top middles, top rears, front heights and rear heights) once its opened up the cost will be minimal for adding all that.
> Lastly, the rear speakers are limited on placement due to windows, but it appears to have just enough room between the windows and the sliding doors.
Speaker stands, they never hurt anyone and allows you to run rear surrounds.
That or the small section of wall you do have between the patio door and the windows could easily wall mount rear surround speakers.
If this was my room that is probably what I'd do, is wall mount the speakers with Speaker mounts like these on each side of the patio door.
I'm surprised there are analog channels still around. I love OTA TV and cut the cord a long time ago, but I thought we'd completely switched over to digital in 2011 (two years after the US killed analog TV).
I don't know what reception is like in deep rural areas, but if you live within 100km of a major urban centre you can probably pick up its digital transmissions. You just need a TV with an ATSC tuner—any TV manufactured after 2007 will have one built in—and a sufficiently sensitive antenna. If you have the land to put up an antenna mast you're even better off.
If you live near an urban centre you can get by with "rabbit ear" antennas. Even in Toronto I only got about three stations on my rabbit ears until I upgraded. I own a Terk HDTV-A now. I got about twenty stations in Toronto, and in the US I get lots more. Most of those Toronto stations came from Grand Island New York, about 90km away, but you can do a lot better than an indoor antenna if it's important to you.
I love digital OTA TV so if you have any questions I'd be happy to try to help.
Absolutely no prob :)
My mom reviews electronics for a living so we end up getting tons of new devices really often and generally need to find cables to match so things are being switched out and added in all the time. To make it more convenient instead of having to go sort through a box or into a drawer and untangle cables I wanted something super easy access to so that if i needed an hdmi , bam, I had one. Same with the others.
For the controllers I used Stick-On Game Controller Hooks 2 Pack. The snes and nes usb controllers are simply hung via a tack.
I got a simple ~$10 corkboard from walmart, used a label maker for the labels and then used CraZy TACKz 36tacks to hang the cables. I wouldn't recommend them though, a standard tack works better honestly ( In theory a hook is great but they loosen and then swing around making it a pain to re-orient them when you're taking things on and off frequently.)
The headphones under the desk is The Anchor Great adhesive, super cheap and can orient it vertically or horizontally which lets you fit two pair ( in my case one for skype/discord+gaming and the other for general use since it has better quality but no mic)
---
For anyone else curious about the other pieces of the set up:
the desk is Series A:72inch Desk by Bush Business Furinture.
The lights are EconoLed RGB 5M 3528 LED Strip Light 300leds
Mousepad is Reflex Lab Huge Gaming Mouse Pad
The headphones are :
SteelSeries Arctis 5 and Audio-Technica ATH-A900X
Monitors are : ASUS VN279QL and Dell U3417W FR3PK
Keyboard is : Razer BlackWidow X Tournament Edition Chroma
Mouse is : Razer Naga Hex v2
I've had this one for going on 8 years now...
http://www.amazon.com/Amplified-High-Definition-Antenna-Off-Air-Reception/dp/B0007MXZB2/ref=sr_1_1?ie=UTF8&qid=1417550944&sr=8-1&keywords=terk+antenna
I would recommend it, it looks a little goofy, but it works wonderfully. Some might recommend getting a powered antennae because it might help boost reception but I feel like that is just more wires and hassle. This guy can perform with the best of the powered antennae out there.
You actually have one of the best android devices for that second to the LG v20. It supports Bluetooth and USB microphones. Otherwise get a splitter like this
https://www.amazon.com/gp/aw/d/B00PYZ2BT4/ref=mp_s_a_1_3?ie=UTF8&qid=1486925540&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Headphone+mic+splitter&dpPl=1&dpID=41p4oX5fWXL&ref=plSrch
Go to the galaxy apps store and get the stock voice recorder it works great. It'll record with dynamic gain so no matter how loud it still won't distort. You can scream into it and it'll sound fine. It's amazing.
There are also great Samsung pro audio solutions too that'll let you do professional 24 bit recordings with live processing
The Windows 7 boot logo screen is always 1024x768 (some TVs report this incorrectly, or the GPU upscales, mine says is 1080p even though it obviously isn't) unless your monitor doesn't support that resolution (and will fall back to the legacy 640 x 480 Vista boot screen, but that's very rare nowadays). Once the video driver starts it will go to your normal resolution. So yes, the resolution change is normal.
I found an interesting thread here on stack exchange.
http://gaming.stackexchange.com/questions/169632/ps4-video-takes-a-long-time-to-show-up-over-hdmi
In other words, HDCP (High Definition Copy Protection) was causing his PS4 to have an extreme delay before displaying HDMI video. You may be having a similar issue.
Check the AMD Radeon Control Panel and look for something along the lines of "HDCP Status" in the monitor/HDTV settings. HDCP should be enabled. However if it isn't, something is not allowing the GPU and TV to establish a secure connection.
Make sure there are no devices (capture cards, splitters, etc) between the TV and video card. Make sure your GPU drivers are up to date too and try doing a clean reinstall of them. Otherwise, I would try is to replace the HDMI cable, as some can be built pretty shoddily. But it could be an issue simply between the GPU and TV. It does happen sometimes. If the issue is HDCP though, you might be able to use certain TV services like Amazon Video, Netflix or play Blu-Rays. If that doesn't concern you, you could just live without it.
I've heard that some HDMI splitter will remove HDCP. However, I have no experience with any for this purpose so I can't vouch for a specific one. Supposedly, this one will: http://www.amazon.com/dp/B004F9LVXC/?tag=hotoge-20
I have jerry rigged plenty of turntables up for sampling so... let's see what we can do here...
(1) Pick up a used turntable from your local craigslist or used electronics shop (follow the guide or post here for recommendations). Depending on your location, $100 will find a basic vintage turntable. Make sure you get a new stylus, maybe even a new cartridge depending on what you want to do. If you want to do backcueing, starting and stopping on the fly, or scratching, get a DJ-oriented cartridge. I recommend the Shure M44-7, it's a workhorse and widely available, you can even pick them up at Guitar Center if there is not an audio shop around you. Runs about $60-70. DO NOT DO NOT DO NOT backcue, start and stop on the fly, or scratch with a regular cartridge. You will fuck up your stylus and your record.
(2) As long as the 2i2 has a built in preamp (not sure if the mic preamps on it will work for all turntable--see comment below) all you need to go from your turntable to your 2i2 are adaptors that go from RCA to 1/4 jacks that you can then plug into your 2i2. You can pick them up at Radio shack or order them online. You can use a regular RCA cable and then use these RCA-to-1/4 adaptors, they are like $3... Radio shack will have them if you don't want to order them online. You could also pick up a RCA-to-1/4 cable, these are more expensive and I would just go with the first option as it also allows you to use better cables, but that's up to you. These are your cheapest options to get you started. The best way to sample is to run your turntable into a dedicated audiocard with RCA/phono jacks on your computer... something to think about in your future.
(3) If the mic preamps on the 2i2 do not work or sound weird because they do not have RIAA equalization, then you might need a phone preamp amp. The cheapest one that gets recommended around here is the ART DJPRE II which is $50. You would hook up your turntable to the preamp and then run the cables with the adaptors mentioned in (2) to the 2i2.
(4) If (2) and (3) don't work or seem like too much you could always pick up a preamp with a USB output. I know that there is the ART USB Phono that has built in USB output for $80. I have not used this and cannot comment on the sound quality.
Good luck.
I personally use the Sony MDR7506 as they're pretty much a standard for basic monitoring. Crisp, detailed high end, tight punchy base. Comfortable for hours on end and if you take decent care of them they should last years with the only wear and tear being the earcup material flaking off a bit. They're definitely made for desk-use as they have a very long coiled non-detachable cable.:
http://www.amazon.com/Sony-MDR7506-Professional-Diaphragm-Headphone/dp/B000AJIF4E
There's also the Sony MDRV6, which are very similar, but apparently have a little more low-end.
http://www.amazon.com/Sony-MDRV6-Studio-Monitor-Headphones/dp/B00001WRSJ
__
As far as speakers go, I've been using the Audioengine A5+ for a few years now and have been very satisfied. Great sound and more power than I'll ever be able to use in my small apartment. They look nice too (I got a good deal on the white ones). They are powered speakers (opposed to the A5) and thus don't require a separate amp. They also come with a small remote for volume/mute:
http://www.amazon.com/Audioengine-Active-2-Way-Speakers-Black/dp/B005OA3BSY
For a DAC I use the Audioengine D1 plugged in through USB, which gives me higher quality audio and a convenient headphone out and volume knob:
http://www.amazon.com/Audioengine-D1-24-bit-Digital-to-Analog-Converter/dp/B006IPH5H2/
CPU | Intel - Core i9-9940X 3.3 GHz 14-Core Processor | $1815.75 @ shopRBC
Motherboard | Asus - ROG RAMPAGE VI EXTREME OMEGA EATX LGA2066 Motherboard | $1027.44 @ Amazon Canada
Memory | Corsair - Vengeance RGB Pro 128 GB (8 x 16 GB) DDR4-3200 Memory | $1179.87 @ Amazon Canada
Storage | Samsung - 970 Evo 2 TB M.2-2280 Solid State Drive | $659.99 @ Amazon Canada
Storage | Samsung - 970 Evo 2 TB M.2-2280 Solid State Drive | $659.99 @ Amazon Canada
Video Card | Asus - GeForce RTX 2080 Ti 11 GB Dual OC Video Card (2-Way SLI) | $1569.99 @ Amazon Canada
Video Card | Asus - GeForce RTX 2080 Ti 11 GB Dual OC Video Card | $1569.99 @ Amazon Canada
Case | Corsair - 1000D ATX Full Tower Case | $412.33 @ Amazon Canada
Power Supply | EVGA - SuperNOVA T2 1600 W 80+ Titanium Certified Fully Modular ATX Power Supply | $465.18 @ Amazon Canada
Case Fan | Noctua - NF-A12x25 PWM 60.1 CFM 120 mm Fan | $37.90 @ Amazon Canada
Case Fan | Noctua - NF-A12x25 PWM 60.1 CFM 120 mm Fan | $37.90 @ Amazon Canada
Case Fan | Noctua - NF-A12x25 PWM 60.1 CFM 120 mm Fan | $37.90 @ Amazon Canada
Case Fan | Noctua - NF-A12x25 PWM 60.1 CFM 120 mm Fan | $37.90 @ Amazon Canada
Monitor | Asus - PG279Q ROG Swift 27.0" 2560x1440 165 Hz Monitor | $799.99 @ Amazon Canada
Monitor | Asus - PG279Q ROG Swift 27.0" 2560x1440 165 Hz Monitor | $799.99 @ Amazon Canada
Main Monitor | Asus - ROG SWIFT PG27UQ 27.0" 3840x2160 144 Hz Monitor | $2398.99 @ Powertop
Keyboard | Corsair - K95 RGB PLATINUM Wired Gaming Keyboard | $269.99 @ Amazon Canada
Mouse | Logitech - G502 LIGHTSPEED Wireless Optical Mouse | $199.99 @ Amazon Canada
Headphones | Sennheiser - HD 650 Headphones | $492.29 @ Amazon Canada
Microphone | Rode NT-USB USB Condenser Microphone | $225.00 @ Amazon Canada
Headphone Amp | Audioengine D1 24-bit Digital-to-Analog Converter | $229.99 @ Amazon Canada
Custom Loop | EK Water Blocks EK-CoolStream SE 480 (Slim Quad) Radiator | $132.28 @ Amazon Canada
Custom Loop | EKWB EK-Cable Splitter 4-Fan PWM Extended, 2-pack | $32.99 @ Amazon Canada
Custom Loop | EKWB EK-ACF Compression Fitting for Soft Tubing, 10/16mm (3/8" ID, 5/8" OD), Black, 4-pack | $53.11 @ Amazon Canada
Custom Loop | EKWB EK-ACF Compression Fitting for Soft Tubing, 10/16mm (3/8" ID, 5/8" OD), Black, 4-pack | $53.11 @ Amazon Canada
Custom Loop | EKWB EK-ACF Compression Fitting for Soft Tubing, 10/16mm (3/8" ID, 5/8" OD), Black, 4-pack | $53.11 @ Amazon Canada
Custom Loop | EKWB EK-ACF Compression Fitting for Soft Tubing, 10/16mm (3/8" ID, 5/8" OD), Black, 4-pack | $53.11 @ Amazon Canada
Custom Loop | EKWB EK-Furious Vardar EVO 140 PWM 140mm Fan, 2500 RPM, 2-pack | $88.00 @ Amazon Canada
Custom Loop | EKWB EK-Furious Vardar EVO 140 PWM 140mm Fan, 2500 RPM, 2-pack | $88.00 @ Amazon Canada
Custom Loop | EKWB EK-Velocity CPU Waterblock, Intel CPU, Copper/Plexi | $138.42 @ Amazon Canada
Mousepad| Logitech Powerplay Wireless Charging Mat| $203.00
Custom Loop| EK-CoolStream CE 420 | $135.00
Custom Loop| EK-XRES 140 Revo D5 RGB PWM| $255.00
Custom Loop| EK Vector RTX RE Ti RGB| $230.00
Custom Loop| EK Vector RTX RE Ti RGB| $230.00
Custom Loop| EK-Vector RTX Backplate – Nickel| $72.00
Custom Loop| EK-Vector RTX Backplate – Nickel| $72.00
Custom Loop| EK-FC Terminal X2 3-slot – Plexi| $50.00
Custom Loop| EK-DuraClear 9,5/15,9mm 3M RETAIL| $27.00
Custom Loop| EK-CryoFuel Solid Cloud White (250mL) BUY 5| $20.00
| Total | $16914.49
This uses a custom cooling loop, it is not very hard to make since I used soft tubing, but if you don't want to use that, you can get 2 of THIS or THIS GPU and THIS CPU Cooler and just remove all the Custom Loop parts.
For the main monitor, I chose a 4K 144Hz monitor and 2 secondary 1440p 165Hz monitors which can also be used for gaming or can be used when you stream.
For the CPU I chose a 14 core i9 CPU, which has the best balance of cores and clock speed of the i9 CPUs, you could get more cores but the clock speed will drop a lot and so will your gaming performance.
If it were me, I'd go for something really versatile/nice like the ES100: https://www.amazon.com/dp/B078H4YD2L
But that might be overkill... still, it's a very nice little device with some amazing audio capability due to its built in DAC and great software. Lots of folks really like this device and for good reason.
A more budget friendly receiver (pretty plain and more utilitarian) would be something like: https://www.amazon.com/TaoTronics-Bluetooth-Transmitter-Receiver-Simultaneously/dp/B01EHSX28M
So you can mix and match speakers as long as your front speakers(left, right, and center) are all the same series. You would have two options for when you sold your house, either remove them and patch the drywall or leave them in. If you aren't planning on staying there long it's probably better to get on wall. For your side speakers you want them between 90-110 degrees from your center position (with 90 being directly beside you). For Atmos you would want to mount them on the wall and angle them to you listening position then rely on your receiver's room correction to fix the delay between one speaker being farther away than the other.
As for sealed vs front ported for front speakers I don't think it matters as much but when you are looking at thinner speakers you'll probably only find sealed. You just don't want speakers with rear ports as you need some space behind the speaker. As for subwoofers sealed subwoofers are tighter (due to air pressure forcing the speaker back to center) but can't play as loud for lower frequencies unlike ported subwoofers that play louder at lower frequencies (due to the speaker not being restricted in motion by air pressure) and also the larger physical volume of the subwoofer the better it will sound. Better explanation here. You buy your subwoofer based on your room not your other speakers. Getting an on wall subwoofer sounds like a bad idea. First off they will be slim which means you'll probably have to pay 2-3x the price to get similar quality and second mounting the subwoofer on the wall is going to transfer physical vibration into your wall.
If it was me I'd say screw paying for significantly more for form factor and find front ported bookshelf speakers (htd level 3, monitor audio bronze 2, ect) that were visually pleasing to the wife, buy mounts like this, mount the front speakers 10-12 feet apart with the tweeter ear level, put the center below the tv either on the top of tv stand or mounted below it, get a nice subwoofer from svs, hsu, rythmic, or monoprice's monolith series, ported is better for movies so that's what I'd get despite them being huge and slap that in a corner or behind the couch which leads me to my next suggestion which is move the couch forward a foot or 2 so you have some space between the couch and the surround speaker or you could just mount them higher and point then down. Due to the fact your not centered in the room I wouldn't do in wall for surround or Atmos and would get something relatively cheap for surrounds as not really that much plays out of them compared to the center and sub during movies (still worth getting tho). Then I'd work on getting your cable management superb as that's going to help you sell it to your wife if you can hide all those cables either in the walls or with cable covers.
I also got confirmation that the only two items I wanted were both disqualified for eligibility, which is bullshit. The promotional terms state video games are ineligible, but it's actually ANY ITEM LISTED IN A VIDEO GAME CATEGORY.
_
Initial Question: Inquiring about the 'BIGTHANKS' promotional code item eligibility.
>03:13 PM PST Pratik(Amazon): Hello, my name is Pratik. I'm here to help you today. Thank you for being a Prime member. NIce to meet you!
__
>03:13 PM PST Me: Hello
>03:14 PM PST Me: I noticed that today, there is a promotional code BIGTHANKS that should remove $8.62 from a $50+ order, however it does not seem to work on the items I am attempting to buy?
>03:14 PM PST Pratik: For the promotions all the items should be sold by Amazon. Here are the terms and conditions of the promotion :
>https://www.amazon.com/b/?node=15240005011&pf_rd_p=0033c189-b389-4340-a57b-3c3f1cb0d54d&pf_rd_r=QY61TM0PMM071R7W6XS0
>03:14 PM PST Me: Both of these items are sold by Amazon.com LLC
>03:15 PM PST Pratik: May I know if they are video games?
>03:15 PM PST Me: They are not video games - one is a controller and the other a Steam Link
>03:16 PM PST Me: https://www.amazon.com/gp/product/B016XBGWAQ/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
>https://www.amazon.com/gp/product/B01GW3H3U8/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
>03:16 PM PST Pratik: Thank you for the link. I am sorry to say that Offer does not apply to digital content, video games, or Amazon Gift Cards.
>Please read our terms and conditions and you will be able to see it.
>https://www.amazon.com/b/?node=15240005011&pf_rd_p=0033c189-b389-4340-a57b-3c3f1cb0d54d&pf_rd_r=QY61TM0PMM071R7W6XS0
>03:16 PM PST Me: But these items do not qualify under those categories
>03:17 PM PST Pratik: The steam link comes underthe digital content. Please read the terms and conditions :
>https://www.amazon.com/b/?node=15240005011&pf_rd_p=0033c189-b389-4340-a57b-3c3f1cb0d54d&pf_rd_r=QY61TM0PMM071R7W6XS0
>03:18 PM PST Me: I have read the terms and conditions, however the steam link is NOT a digital item and neither of these two physical items are VIDEO GAMES. As such, why are they not eligible for the promo code to be applied?
>03:20 PM PST Pratik: Please check the items one more time. The items comes under the video games category.
>03:21 PM PST Me: They may be in the video game category, however they are not themselves video games. The terms and conditions specifically says "video games" no?
____
>03:21 PM PST Pratik: Please try to understand that if the items comes under the Video games category then the promotion will not be applied.
To complicated and confusing. Can you cut to the chase?
You knocked something into something ... then what happened?
"I accidentally kick the hi-fi and knocked it onto the tuner." ...and then ...what?
So, what is it you need? Seemingly a remote, but what happened to the existing remote?
The remote had a AUX/MD switch, but what is MD?
You CAN NOT run the speakers directly from the Computer.
If you want a full universal remote, nothing beats the Logitech Harmony Remotes. Harmony has many thousands of devices that they support, and you can check them in advance on-line to be sure your device is supported.
https://www.amazon.com/Logitech-Harmony-Infrared-Universal-Programmable/dp/B004OVECU0/
https://www.amazon.com/Logitech-Harmony-350-Simple-Set-up/dp/B00J7KM5X4/
I use the Harmony 350 with Rotel, Onkyo, Yamaha Stereos with out any problem or conflict.
You plug the Remote into a computer USB input, the go to MyHarmony.com, enter your equipment, it is automatically programmed through the USB connection. No messing with codes or pushing the On/Off button 50 times.
https://www.myharmony.com/en-us/
Now if you want to replace your amp, then consider what features you need and how much money you want to spend. You can get a very good very reasonably price Amp w/DAC and decent power for a pretty reasonable price -
SMSL AD-18 Class-D Amp with DAC - $139 -
https://www.amazon.com/SMSL-AD18-Amplifier-Bluetooth-Subwoofer/dp/B071JN7GXN/
You will find several very positive reviews of this product on YouTube, this being one of many -
https://www.youtube.com/watch?v=UEooiaet9eQ
There are many of these Class-D/Class-T amps available on Amazon, the prices range from about $25 up to about $150 depending on brand, power, and features.
https://www.amazon.com/s?k=smsl+amp&ref=nb_sb_noss_1
https://www.amazon.com/s?k=lepai+lepy+amp&ref=nb_sb_noss
https://www.amazon.com/s?k=topping+amp&ref=nb_sb_noss_1
I'm still not sure what the problem is or what you need, but hopefully I've given you some options to consider.
> CHANE A2.4 can be used as a LCR?(left center right)?
Correct. Their tweeters can be rotated by hand using just a screwdriver as they are in a horizontal alignment from the factory but many rotate them after shipping and use the speakers vertically all the way across or at least for the left and right speaker. Chane owner/speaker designer Jon Lane can walk you through it fairly easily.
>The eventual goal is for a 5.1 setup. should I get 3 CHANE A2.4 then 2 other surrounds and a subwoofer or get 5 CHANE A2.4 then subwoofer?
If your goal is to listen to a lot of multi channel music then having matching Chane bookshelves as side surrounds makes some sense but if not and mostly listening to 2 channel stereo or Direct then matching the surrounds speakers isn't a necessity. The Chane bookshelf A1.4 is a large and fairly heavy bookshelf that usually needs a mount with a metal pad to secure it like from VideoSeCu. Plus yes I recommend a subwoofer. A $400 to $600 subwoofer budget will get you a good quality subwoofer but lesser budgets can be accommodated as well. I have Rythmik subwoofers with my Chane‘s.
>****I know I sound like an idiot.
Anything but !
I always like the Harmony One/900 but they stopped making them, it's been replaced by the Harmony Touch, which is a good remote but lacks physical number keys, which IMO is a crucial feature of any decent universal remote.
Logitech still sells the Harmony 650, it's got a rechargeable battery and is pretty much the same thing as a Harmony One, but uses buttons around the screen instead of a touchscreen like on the One. But you can get it for $65, instead of $300 give or take.
http://www.amazon.com/Logitech-Harmony-Remote-Control-Silver/dp/B004OVECU0/ref=sr_1_1?s=electronics&ie=UTF8&qid=1406940486&sr=1-1&keywords=harmony+750
This is a bit of a tricky setup, but as long as you only want to use the microphone on your PC it is pretty achievable. Also if you want to play the sound off your PC and use a gaming console, you will require a mixer to play both sources. If you don't require this it makes your setup less complicated.
Either way you will need an HDMI audio extractor, this should work: https://www.amazon.com/dp/B00BIQER0E Plug that into the output of HDMI switch then:
Setup 1 - With mixer. https://www.monoprice.com/product?p_id=614305 plug the output of the HDMI audio extractor and your PC (using 3.5mm to RCA cable). Headphones plug into mixer. This will not sound as good as option 2.
Setup 2 - With DAC. https://www.amazon.com/dp/B0722FRQQ7 . Plug the output of the HDMI extractor (using an optical cable) and the PC in using a USB cable. Select one or the other using the toggle switch and it will play that source out to the headphones.
I would recommend setup 2, as the external DAC will be of higher quality.
As far as microphones go, try a USB one (this is a decent cheaper one, you can go more or less expensive: https://www.amazon.com/dp/B014PYGTUQ) to reduce the audio noise your friends are telling you about.
>What modes/frequencies are you looking at using?
I really have no idea. To be honest, looking at the band allocations, I genuinely don't understand the difference between the bands. Is it basically just if there's people on a particular frequency, then you find another in your band allocation? I suppose it would be difficult to listen to the higher bands without having a huge antenna?
>Are you comfortable with used equipment?
Sure, but the only issue is that since I have no idea what to look for when buying amateur radio equipment, I don't know whether something is trustworthy or not. Since it's expensive electronics and stuff, I feel like that can easily go wrong and I might need a warranty/return, and used equipment scares me a bit. Nevertheless, if there's a way to make an educated decision when buying used equipment that you could help me with, I'd appreciate it.
>Are you near a city/town that has a club presence and possibly a club rig you can book time on?
There's a club presence but it's basically just a bunch of old guys who meet once a month to talk about ridiculously complicated electronics stuff which I don't really understand yet. I think (???) my university has an amateur radio club, so I'll try to visit them, but other than that I have no other contacts.
>Are you interested in exploration/listening/making contact? (SDR dongles can be a huge cost saver if looking at passive comms).
Not really too concerned with making contacts, more about learning about the equipment/science/electronics so that I can make projects of my own in my dorm/college so that I can talk about it to job interviewers. I have an SDR dongle, but I still really don't understand it that well. Can it basically receive everything that a regular transceiver can, but more? Or are there limitations? I understand that it can't transmit and that's cool, but I really get confused by the software aspect. Also, apparently my dongle has a direct sampling feature that can be accessed via software, but to get to the HF frequencies, do I need to actually buy/make my own special antenna just for the HF frequencies or can I use the little telescoping antenna included?
The big question I have is that there are so many frequencies/bands but I don't know what the difference is/what they're used for. All I'm doing now is just going up and down the regular FM bands while also slowly going through the RTL-SDR manuals to understand it. I just think it might be nice/helpful to actually have a hardware transciever that I can play with and hopefully learn about the hardware side when making my own systems/projects (which again, I don't know what I can do, maybe make some repeaters or something no idea) that I can talk about to employers in the telecom/networks field.
There are a number of solutions available. My assumption is you are looking to use the external computer speakers you have currently without investing in a larger sound bar or AV receiver type solution. I also assume those external speakers are connected to the headphone jack (3.5mm) on your computer.
Basically you need to get the audio out of the HDMI signal from the cable box/console. Unfortunately it doesn't look like that Sony model has an audio loop out of the HDMI audio (that would be the best way). If you are lucky the next easiest solution is something like this:
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE
A simple RCA to headphone adapter. I know with the cable box I own, all the outputs are live. Meaning you can plug into any of the analog audio outputs (RCA L/R). One thing to note is that this may not work even if those outputs are live. Sometimes HDMI has a processing delay at the cable box or the projector. So the audio may be off by a few frames or more.
I do not know if that would work for a game console. If it only has HDMI out then you would need an active device to extract the audio, and at that point you probably are spending close to a nicer sound bar type solution. If the console has component outputs it may be easier to go analog (RGB RCA connectors and RL RCA audio). You would need a VGA to RCA adaptor cable for the projector as well then:
http://www.amazon.com/VGA-RCA-Component-RGB-Cable/dp/B003DSC96E
(this analog solution would also work for the cable box)
For the Wii or game cube, both of those are just standard composite video with analog audio so the above audio adapter would work.
It's not perfect, it won't do over 1.2Ghz iirc, but for $30 it's totally worth it to get started. Having a sdr, just for reception, is a super powerful tool. I've used mine for all kinds of things. It's not a scientific instrument and I can't use it that well anyway but I like the peace of mind in verifying compliance.
Edit: forgot the link www.amazon.com/dp/B011HVUEME
I got this: http://www.amazon.com/dp/B0007MXZB2/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1
It works well, I get something like 20 channels. It does occasionally stutter or have issues, but for the most part the signal comes in clear. We pretty much use it to watch the news. It worked extremely well for the super bowl. I would be a little reluctant to watch a show I really cared about with it, as there is a good chance you would miss pieces of the show when you lose signal from time to time.
That's all I can think of for the moment. I may add to the list as I think of more cool sub $100 ham toys.
Hey Adam. No question but I saw that you use the Sony MDR-7506 on the podcast. Might I recommend replacing the stock pads with these.
They are extremely comfortable and they make wearing those headphones for long periods of time much easier.
Thanks for everything You, Norm and Simone do on Still Untitled. What a great podcast.
heres a couple
https://www.amazon.com/SilverStone-Technology-EBA01-Aluminum-Headphone/dp/B00KONCCNG/ref=sr_1_2?ie=UTF8&qid=1467412265&sr=8-2&keywords=silverstone+headphone+stand
https://www.amazon.com/Woo-Audio-HPS-HS-Aluminum-Headphone/dp/B006KTDXYU/ref=sr_1_2?ie=UTF8&qid=1467412354&sr=8-2&keywords=woo+audio+stand
If you want to save space i suggest a holder for under the desk like one of these
https://www.amazon.com/Brainwavz-Hengja-Headphone-Desk-Hanger/dp/B012VIWG28/ref=sr_1_2?ie=UTF8&qid=1467412509&sr=8-2&keywords=headphone+holder
https://www.amazon.com/Brainwavz-Truss-Metal-Headphone-Hanger/dp/B0192P8U5U/ref=pd_sim_23_9?ie=UTF8&dpID=412kIGeanDL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&psc=1&refRID=KPV7YWEWFV1D50GQ6Q8A
https://www.amazon.com/Anchor-Under-Desk-Headphone-Stand-Mount/dp/B00P31BMHG/ref=sr_1_1?ie=UTF8&qid=1467412509&sr=8-1&keywords=headphone+holder
i also have another idea which might look good with the wood desk. you could diy a stand with some pipes as well. if you're interested in that i think i could find a different forum post with other people doing that.
good luck with your setup :)
good advice here in this thread so far but your description leaves us all guessing a bit.
if, as I suspect, the mic does not require phantom power Then:
I think that a possibly
better solutionwould be to get a stereo mini female to two RCA Male and use the "Record In" or "tape In" RCA's found towards the right on most behringer mixers.Lika dis: http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE
Edit: On second thought the mic probably won't have the voltage to drive that RCA tape in input without a preamp of some kind to "step up" the mic to line level
(the RCA inputs expect line level) ( maybe this would have same chance of kinda working that your 1/8 to 1/4 adapters had going in to line inputs -you would have to gain em up a lot and you would increase the noise floor)
Does your input of your channels have a mic/line switch by the 1/4 inputs --if so this gets you around that aspect of the problem --set the square up/down switch to mic and you are good with what you have (maybe )
What you really might need is a cable that will break out the 3.5 male jack into two XLR's I think (if the mic male mini jack is a stereo plug that does not involve the earphone side of your headset!) -- in this scenario , depending on whether you male plug is TRS,TRRS, or TRRRS, you might end up with one xlr having the mic signal you need going into your mixer ( yay!) and the other one "needing" to have the audio send to your earphone going into it.
Kinda Lika Dis One: http://www.amazon.com/Hosa-Stereo-3-5mm-Male-feet/dp/B000068OEP/ref=sr_1_1?ie=UTF8&qid=1407295366&sr=8-1&keywords=xlr+to+mini+stereo but with a female on the 1/8 side -- an 1/8 Stereo "barrel" would convert the one shown to the right gender
If you want to test the waters, this is definitely the cheapest option. For an $8 antenna it does an outstanding job. I pick up about 20+ channels outside Charlotte, NC and the quality is impeccable. Looks great on my 60" LCD. I have at least 5 friends who have also used the same antenna and they all rave about it. It's worth the $8-9 to try it out! Good luck.
As I said in #6 above, I'd really appreciate it if people could link things I could get online (pref on Amazon.de). Really don't know this city well enough.
If I go the DAC/Amplifier route, I've been looking at the follow:
> That would have meant that third party, HIFI USB-C DACs would be showing up. But that's not what happened.
Maybe I'm misunderstanding, but it looks to me that is what happened, though. We now have options like the NextDrive Spectra X, a dongle solution that I've been using on my Note9 with my wired JH Audio Roxannes and it's been nothing but an improvement over directly connecting to the headphone jack. I also picked up an EarStudio ES100, a wireless solution that uses aptX HD, which sounds fantastic and lets me use my wired IEMs and plan on using that with the Note 10+ that just showed up for me yesterday.
To me, the fair gripe is that these are extra things you need to buy and carry around, but that's not been a problem for me in practice and it's why I gave up on caring about the headphone jack as a heavy user and mild audiophile.
You might want to look into getting some sort of breakout from your HDMI output from your Kodi source for the audio portion, so that you're feeding 5.1 audio to your amp. Right now, your amp and speakers are only being fed 2.0 stereo audio in analog (basically the lowest common denominator of multi-channel audio).
Something like this would allow you to pipe 5.1 audio to your amp, provided it has an HDMI or optical S/PDIF input. Then again, if your TV has HDMI or (more likely) optical (or RCA digital) S/PDIF audio output, you could feed that into your amp for the cost of the cable alone. This all assumes that your amp is capable of accepting some sort of digital audio at all.
All that to say, however, if your amp is HDMI-enabled, you're probably better off configuring it the way it was intended, and use your amp as a signal selector, and run it as Kodi device > amplifier > TV over the best signal type your devices support (HDMI would be best, followed by YPbPr analog RCA connectors, S-Video, and then composite RCA video. For audio, the hierarchy would be HDMI, S/PDIF [Digital RCA or Optical], 6-channel RCA analog, and finally RCA 2-channel analog)]
Based on what you're saying here, I am guessing your amp is only capable of 2-channel RCA audio, in which case, get yourself a new amp, son! (As you, to your credit, say you plan to do.) If that's the case, save up for a nice HDMI-enabled amp (they basically all have HDMI nowadays). I'm partial to Denon, myself, but they can be on the pricey end of the spectrum.
Edit: And to actually answer your question: until you upgrade your granddaddy of an amplifier, you want to set Kodi to 2.0 audio. Also, consider sending the audio straight from the Kodi device straight to the amp. You'd introduce fewer points of failure/interference that way, and perhaps even lower latency; so it'll be easier to keep the audio and video in sync without fiddling with the settings in Kodi (if that's an issue for you, of course).
That was my problem too in the beginning. This may get a little long, but I can definitely help you out.
Elgato has page to help with this issue
I use the original Elgato HD and at first I had a headset with a USB and 3.5mm headphone jack, so I had to make a little jerry rig setup with a splitter and an audio Y cable
But if you are willing to spend some money, I highly recommend getting this headset
Its what I am using now because I can talk to my teammates in game, hear my tv audio, and listen to music or donation goals on my PC since it has a multi media source input.
I hope this helps.
Ok, so you have 2 audio out ways. The first is optical. This is much better, can do surround sound etc, but isn't exactly headphone friendly, so scratch that. You also have RCA out, which can easily go to a headphone, so here is what you will need.
First up, you need an adapter to convert RCA to a headphone. You might have one hanging around as some mp3 players, etc, comes with them. If not, Amazon has it for 1.46 with free shipping. You can also get them at bestbuy/walmart/etc, but they will likely cost at least $20. Once you have it, you can plug it into the red and white "audio out" ports on the bottom back panel. the closest 2 rca ports to the ethernet cable, and right next to the headphone port (to bad it is only audio in, for from PC's).
Ok, now you have a headphone jack, time to get headphones. You get a bit of choice, as now you just need wireless headphones. This is also where most the money will be. Personally, I would get something like this from amazon or this from ebay. This lets you use any bluetooth headphone with your TV, thus the headphones will work with your phone, etc, and be of more use. If you do go this way, you can get cheap headphones like this all the way up to very good ones. Whatever you want.
If you don't want to mess with bluetooth, or it is too much, you can just get this from ebay for cheap, or this one from amazon. They will both work, though won't be as useful, and likely won't sound as well as the bluetooth ones. Also, if you get the amazon one, it can actually directly connect to the rca output, so that is a plus :).
TLDR: If you want the cheapest way, just buy this. Though not the best, it should do exactly what you need.
Here is my build list formated for reddit
Group | Name | Price | Quantity | Total | Link
--- | --- | --- | --- | --- | ---
Pc | (Everything Inside the case) | | | |
$1,601.62 | Intel Core i7-6700K 4.0GHz Quad-Core Processor | $347.00 | 1 | $347.00 | https://www.amazon.com/gp/product/B012M8LXQW/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
| Cooler Master Hyper D92 54.8 CFM Rifle Bearing CPU Cooler | $44.80 | 1 | $44.80 | https://www.amazon.com/gp/product/B00NXLYE4G/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
| Gigabyte GA-Z170X-UD5 ATX LGA1151 Motherboard | $171.49 | 1 | $171.49 | https://www.amazon.com/gp/product/B012N6EW6G/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
| Corsair Vengeance LPX 32GB (4 x 8GB) DDR4-2666 Memory | $129.99 | 1 | $129.99 | https://www.amazon.com/gp/product/B00OTJZTZE/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
| Samsung 850 EVO-Series 250GB 2.5" Solid State Drive | $97.99 | 1 | $97.99 | https://www.amazon.com/gp/product/B00OAJ412U/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
| Hitachi HDS723020BLA642 | $58.00 | 3 | $174.00 | EBay
| EVGA GeForce GTX 1070 8GB FTW Gaming ACX 3.0 Video Card | $459.99 | 1 | $459.99 | https://www.amazon.com/gp/product/B01I60OGUK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
| EVGA 850W 80+ Bronze Certified Semi-Modular ATX Power Supply | $90.39 | 1 | $90.39 | https://www.amazon.com/gp/product/B00KYK1CC6/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
| XFX AMD Radeon HD 5450 1GB | $29.99 | 2 | $59.98 | https://www.amazon.com/gp/product/B005IUW7YE/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
| PWM Female to 4 x PWM Male Computer Case Fan Splitter | $6.50 | 2 | $13.00 | https://www.amazon.com/gp/product/B00DYQRFY6/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
| Sabrent 2.5" SSD & SATA Hard Drive to Desktop 3.5" | $12.99 | 1 | $12.99 | https://www.amazon.com/gp/product/B00UN550AC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
| 80MM 5000RPM Fan | $0.00 | 2 | $0.00 |
| 92MM 5000RPM Fan | $0.00 | 4 | $0.00 |
Monitors | | | | |
$744.66 | Seiki Pro SM28UTR 28-Inch 4K UHD 3840x2160 | $195.69 | 1 | $195.69 | https://www.amazon.com/gp/product/B013XWQF28/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
| AOC e2460Sd 24-Inch Widescreen LED Monitor | $142.99 | 3 | $428.97 | https://www.amazon.com/gp/product/B00C99MUHQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
| Dell 17" 5:4 | $30.00 | 4 | $120.00 | EBay
Cables | | | | |
$137.77 | Cable Matters Gold Plated DisplayPort to DisplayPort Cable 10 Feet | $11.99 | 1 | $11.99 | https://www.amazon.com/gp/product/B005H3Q5E0/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
| Cable Matters Active DisplayPort to DVI Male to Female Adapter | $19.99 | 2 | $39.98 | https://www.amazon.com/gp/product/B00EDT01TO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
| DVI Male to Female 90 Degree Adapter Connector | $4.43 | 3 | $13.29 | https://www.amazon.com/gp/product/B008X0ZJZ0/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
| 15ft 28AWG CL2 Dual Link DVI-D Cable - Black | $10.47 | 3 | $31.41 | https://www.monoprice.com/product?c_id=102&cp_id=10209&cs_id=1020902&p_id=2760&seq=1&format=2
| 15ft Super VGA M/M | $5.69 | 4 | $22.76 | https://www.monoprice.com/product?c_id=102&cp_id=10201&cs_id=1020101&p_id=3622&seq=1&format=2
| 15ft USB 2.0 A Male to A Female Extension | $1.87 | 5 | $9.35 | https://www.monoprice.com/product?c_id=103&cp_id=10303&cs_id=1030304&p_id=5435&seq=1&format=2
| 25ft hdmi cable | $8.99 | 1 | $8.99 | https://www.amazon.com/gp/product/B00SKVMHI4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Desk Accesseries | | | | |
$263.49 | Perixx PX-5200 Cherry MX Blue | $72.91 | 1 | $72.91 | https://www.amazon.com/gp/product/B00NY45NCY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
| Logitech C310 Webcam | $31.93 | 1 | $31.93 | https://www.amazon.com/gp/product/B003LVZO8S/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
| Lapel Mics | $6.50 | 1 | $6.50 | https://www.amazon.com/gp/product/B005DJOIHE/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1
| FingerPrint Reader | $12.58 | 1 | $12.58 | https://www.amazon.com/gp/product/B000HHHP7C/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
| Mouse Pad | $8.99 | 1 | $8.99 | https://www.amazon.com/gp/product/B00GB0IF50/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
| Headset Func HS260 | $79.99 | 1 | $79.99 | https://www.amazon.com/FUnc-FUNC-HS-260-1ST-fUnc-HS-260/dp/B00HH3H83U
| Altec ACS 54 - Speaker | $0.00 | 1 | $0.00 |
| Logitech G700S | $50.59 | 1 | $50.59 | https://www.amazon.com/gp/product/B00BFOEY3Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Audio Accesseries | | | | |
$58.33 | BEHRINGER MICROAMP HA400 | $24.99 | 1 | $24.99 | https://www.amazon.com/gp/product/B000KIPT30/ref=od_aui_detailpages00?ie=UTF8&psc=1
| 5-Pack 6.35mm Male to 3.5mm Female Adapter | $7.99 | 1 | $7.99 | https://www.amazon.com/gp/product/B00XAQD4YA/ref=od_aui_detailpages00?ie=UTF8&psc=1
| 3.5mm Male to 2 x 3.5mm Female Splitter Cable | $3.99 | 1 | $3.99 | https://www.amazon.com/gp/product/B0081ZBNI4/ref=od_aui_detailpages00?ie=UTF8&psc=1
| Coupler 3.5 mm Female - 3.5 mm Female Stereo or Mono | $3.93 | 1 | $3.93 | https://www.amazon.com/gp/product/B000068O4N/ref=od_aui_detailpages00?ie=UTF8&psc=1
| 3 feet Slim 3.5mm Stereo Audio Cable - M/M | $2.71 | 2 | $5.42 | https://www.amazon.com/gp/product/B004G3UK5C/ref=od_aui_detailpages00?ie=UTF8&psc=1
| 3-Feet 3.5mm Stereo Male to Female Extension Cable, 5-Pack | $12.01 | 1 | $12.01 | https://www.amazon.com/gp/product/B00SWOJLSS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Lighting | | | | |
$86.88 | Studio Designs Swing Arm Lamp Black | $24.75 | 2 | $49.50 | https://www.amazon.com/gp/product/B00I2S7MHQ/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
| Lutron TT-300NLH-BL Credenza Lamp Dimmer Black | $14.83 | 1 | $14.83 | https://www.amazon.com/gp/product/B00024BJZE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
| Triple Outlet Swivel Adapter, White | $3.27 | 1 | $3.27 | https://www.amazon.com/gp/product/B000HJBENG/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
| Daylight LED Light Bulb 15W | $9.64 | 2 | $19.28 | https://www.walmart.com/ip/Great-Value-GVRLA1850ND-Great-Value-LED-15W-A19-Light-Bulb/38596922
Cable Managment | | | | |
$18.81 | 100 Velcro Ties | $5.00 | 2 | $10.00 | https://www.amazon.com/gp/product/B001E1Y5O6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
| 100 Releasable cable ties | $2.47 | 3 | $7.41 | https://www.monoprice.com/product?c_id=105&cp_id=10520&cs_id=1052012&p_id=5795&seq=1&format=2
| Cable Clip nais | $0.70 | 2 | $1.40 | https://www.monoprice.com/product?c_id=105&cp_id=10520&cs_id=1052006&p_id=5834&seq=1&format=2
Power | | | | |
$53.13 | Monster MP AV 750 Audio Video PowerCenter | $18.99 | 1 | $18.99 | https://www.amazon.com/gp/product/B004ETIKH8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
| AmazonBasics 6-Outlet Surge Protector Power Strip 2-Pack | $12.99 | 1 | $12.99 | https://www.amazon.com/gp/product/B00TP1BWMK/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
| 3 Outlet Single-Tap Wall Tap | $4.00 | 2 | $8.00 | https://www.amazon.com/gp/product/B007XQORTO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
| 15ft 16AWG Power Cord Cable | $5.20 | 1 | $5.20 | https://www.monoprice.com/product?c_id=102&cp_id=10228&cs_id=1022801&p_id=5287&seq=1&format=2
| 10ft 18AWG Right Angle Power Cord Cabl | $2.65 | 3 | $7.95 | https://www.monoprice.com/product?c_id=102&cp_id=10228&cs_id=1022809&p_id=7677&seq=1&format=2
Network | | | | |
$33.98 | TP-LINK 8-Port Gigabit Desktop Switch | $22.99 | 1 | $22.99 | https://www.amazon.com/gp/product/B001EVGIYG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
| 5-Pack, Cat6 Ethernet Patch Cable in Blue 3 Feet | $10.99 | 1 | $10.99 | https://www.amazon.com/gp/product/B00C2B81K6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Monitor Mount | | | | |
$215.27 | Arm wall mount | $17.54 | 3 | $52.62 | https://www.monoprice.com/product?c_id=109&cp_id=10828&cs_id=1082821&p_id=12232&seq=1&format=2
| Top wall mount bracket | $4.80 | 4 | $19.20 | https://www.monoprice.com/product?c_id=109&cp_id=10828&cs_id=1082821&p_id=3005&seq=1&format=2
| Center Monitor Mount | $7.99 | 1 | $7.99 | https://www.monoprice.com/product?c_id=109&cp_id=10828&cs_id=1082821&p_id=4564&seq=1&format=2
| 2x8 | $7.47 | 3 | $22.41 | https://www.lowes.com/pd/Top-Choice-Common-2-in-x-8-in-x-10-ft-Actual-1-5-in-x-7-25-in-x-10-ft-Lumber/4082916
| 2x4 | 2.55 | 1 | $2.55 | https://www.lowes.com/pd/Common-2-in-x-4-in-x-8-ft-Actual-1-5-in-x-3-5-in-x-8-ft-Stud/1000074211
| 3" clamp | $5.98 | 6 | $35.88 | https://www.lowes.com/pd/IRWIN-QUICK-GRIP-3-in-Clamp/50214643
| 4" Hinge | $2.81 | 2 | $5.62 | https://www.lowes.com/pd/Gatehouse-4-in-H-Oil-Rubbed-Bronze-Interior-Exterior-Mortise-Door-Hinge/4772785
| Wood Screws | $9.00 | 1 | $9.00 | Lowes
| Assorted brackets/hardware | $25.00 | 1 | $25.00 | Lowes
| Case Rack Mount | $35.00 | 1 | $35.00 | EBay
Misc | | | | |
$35.97 | Steam Link | $19.99 | 1 | $19.99 | https://www.amazon.com/gp/product/B016XBGWAQ/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
| Bluetooth Adapter | $7.99 | 1 | $7.99 | GRANDCOW Bluetooth 4.0 USB Adapter Dongle for Windows 10/ 8.1 / 8/ 7 / Vista / XP
| 19 Key Numeric Keypad | $7.99 | 1 | $7.99 | https://www.amazon.com/gp/product/B005DJSAAU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I have my Switch, 360, and ps3 hooked up to my monitor using an HDMI switch, and an Audio Extractor. This works super seamlessly, I just turn on whatever console I like and the Hdmi switches and I am able to get digital audio out automatically. I use a headset mainly, one of my friends have a logitech z213 speakers and they sound pretty nice! Hope that helps!
When I used the HM5 pads that everyone here raved about, I found that it cooled off my ears considerably. The MDR-7506 keeps a very close contact with your ears, whereas these are so big that there's room to breath. These would seem ideal but they're out of stock on Amazon so you might have to look elsewhere.
Pure velour always seems to exacerbate the problem for me. I don't have issues with the HD598 or HD600, but they also have way more roominess than MDR-7506s have. As a direct comparison, I tried some Massdrop velour pads on my M50x in a desperate attempt to make them comfortable, and I found them to be pretty muggy and hot. When I switched to the pleather HM5 pads, they became cooler, more comfortable, and sounded better. The velour on my DT770s actually makes my head hot despite the roominess because there's tons of velour surface area touching your head, so I think the velour HM5 pads might have the same issue but I'd enjoy hearing what someone else says.
For $20 shipped, the pleather HM5 pads are incredible IMO.
Seconded on /u/Quicksilver16's Vmoda recommendation.
For pure bass, Ultrasone DJ1 pro works too but for the price the Vmoda is better built, even before you get to sound quality.
If you prefer over-ear to the VModa's on-ear, there's also the bassy brother to the classic Ath-M50, the Pro700mkII where you get a (in my opinion) key upgrade with the detachable cord. Also, nicer construction for the mobile user as it's built for traveling DJs rather than as studio gear.
I actually gave a full-day workout to the budget-beater Monoprice 8323s today. Though the DT250 pads as an upgrade are almost a required addition and unfortunately double the price, they make for an astonishingly good $45 (total) set of headphones. They benefit more from quality sourcing than the VModa M-100s, which don't change much when I go from iphone to laptop to usb dac/amp, but for the asking price that's not a deal breaker. Wouldn't mind seeing some reviews on the new Beats-looking Monoprices too. For $50 that might be a great package.
This used to be possible with Windows Media Center and a CableCARD PC adapter such as the InfiniTV 4.
https://www.engadget.com/2010/03/30/ceton-infinitv-4-cablecard-tuner-review/
In the setup outlined above, you plug the cable from the wall directly into the device and you can schedule DVR, record to your heart's content and store recorded media on an external HDD if needed all through Windows Media Center. The advantage being you don't have to worry about your DVR box filling up and if you want to keep recorded content, you can move it onto a different storage device if you like. I love recording sporting events to watch later, for example, and when VCRs went away, this method was very helpful.
Unfortunately Microsoft phased Windows Media Center out of later operating systems and it's completely missing from Windows 10. I guess they'd rather you just keep paying that extra $15/month for a stupid DVR cable box.
I mention all of that to counter the previous poster's point about legality. It's not illegal to record shows for your personal enjoyment off of your legally obtained cable access.
As to your original question - yes. Run your HDMI through a powered HDMI splitter such as this one to bypass HDCP encryption and it should work just fine. If it's for personal use, this should be perfectly legal. If it's for uploading to some sort of bay that is loosely associated with Captain Hook and his cohorts, then probably not so much.
https://www.amazon.com/gp/product/B004F9LVXC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I'm doing what you described with the Harmony Home Control (Amazon link) and IFTTT.
What you do is setup the Harmony device with "Activities." So for example I have one Activity called "Watch AppleTV" that turns on the ATV, turns on the receiver and switches it to HDMI3 out, then turns on the TV and switches it to input1.
Then you login to IFTTT and add your Harmony and Amazon Echo accounts to IFTTT. Then you make a two IFTTT recipes for each activity. So I made an activity that turns on Watch AppleTV and another that turns off Watch AppleTV. You run these from the echo by saying "Alexa trigger run on the AppleTV." You need to say trigger to the Echo knows to send it to IFTTT. After about two seconds the command runs from the Harmony and you are all set.
The key is you need to make a Harmony activity on the Harmony for everything you want. Then those activities show in the dropdown list for Hamony on IFTTT.
The only one I'm not sure about is your up/down volume idea. I think you could make a Harmony activity for recover volume up then an IFTTT trigger to match. Then another activity and trigger for receiver volume down. I just use the Harmony remote for volume.
One more thing the article didn't touch on. If you live close to a city you can most likely get an antenna for one month's worth of cable. That will give you access to the national channels / local programming. It's not much, but it's entirely free after you pay for the antenna.
Two very popular antennas are the MOHU Leaf and the Terk Indoor antenna
To see where the towers are in your area - you can look at antenna web - I am sure there are other sites, even better ones.
EDIT: If you don't want to spend the money on the antenna and want a little weekend project; you can make your own antenna. Google coat hanger antenna or something or try something like this
Sup all !
I just ordered a RLT-SDR Blog V3 with antennas (https://www.amazon.com/dp/B011HVUEME/)
--
And as a total newb on the hardware, what should I worry from the start? Should I put a metal base on the antenna that comes with it, should I use a indoor TV atenna or make a new one? Is there an easy way to start HF with it with not much hardware to buy? Any tips for a beginner with this model?
Apart from that I will read more about SDR while it arrives here, I don't know what to search from the frequencies yet haha. I use Fedora Linux and will use only *nix software and they look awesome! :D
Any tips welcome, and sure I will read the sidebar of course :) Thanks !
So the magni 3 has rca inputs.
So my set up is computer --> optical --> smsl 793 dac --> rca --> magni 3 --> headphones.
The smsl 793 is actually a dac/amp combo but I found it underwhelming with my 6XX, luckily it has a line out if you only want to use the dac portion. I've had it for years but they were only pushing 32 and 80 ohm headphones before and would really struggle to reach listening volume with 300ohms.
However a dac is not necessary. You could very easily take the 3.5mm jack into a split rca into the magni, then hook your headphones to that. You'd just need this cable between your pc and the amp.
https://www.amazon.com/Mediabridge-3-5mm-Male-2-Male-Adapter/dp/B004YEBK66
Many people recommend a dac simply because it can make an improvement in sound, will help avoid electrical interference since the signal is over USB or SPDIF (Coax & Optical), and can help if you have a noise floor issue (hiss) and jitter.
Most modern dacs in computers are fairly decent, and the the built in amps are not terrible for headphones up to 32-80 ohm range. But once you get into those high ohm, you have to get an amp.
Two options for you, I recommend both to many people and use the extender cable myself:
 
When you say "Mic Cable" I am assuming you mean a 4 pole 3.5mm audio cable with a built in mic, either inline such as a cell phone earbud cable or a boom mic like the VMODA BoomPro. I use the BoomPro at my home desk, and have this cable:
https://www.amazon.com/gp/product/B00RXNUXGS
https://www.amazon.com/gp/product/B0058DOWH6
Run the cable from back of computer onboard audio, up the back of you desk, and route it through the cable management area of your monitor. you now have a dual jack right under your screen to put your headset on whenever you need to call and cant use the FiiO
Alternatively, leave your headphone as is, forget the mic cable, and get a USB mic. alot of people recommend the Blue Snowball and it is a great mic but also rather large for a usual office desk. I rather like the Blue Snowflake, its almost as good sound quality, perfectly adequate for conference calls and other non recording production needs, and much much smaller:
https://www.amazon.com/Blue-Snowflake-Ultra-portable-High-fidelity-USB/dp/B0012AUHXW
The ultimate remote. Literally.
I bought one of these when I moved in with my now wife a few years ago. She didn't like my collection of remotes and remote keyboard, she just wanted to be able to turn on Bravo. Best thing I ever did. Automating activities makes turning things on/off correctly a snap. For a keyboard you can get one of these. Whatever you turn on that accepts a bluetooth keyboard - PC, PS4, Fire TV, whatever - the keyboard is automatically connected to it. I wouldn't try playing Quake on it, but it works great for web browsing. Battery in the remote dies? No problem, open up the Harmony app on a phone or tablet and work it that way while the remote charges.
I've since set up cheaper Harmony Companions to control the bedroom TVs, since I use Xbox 360s as media center extenders for live TV. My daughter has some Philips smart bulbs and it controls them as well. Overall I've come to love Harmony Hub based products, they just work.
I installed the Netflix Windows 8 application and XBMC.
I then installed OblyTile and created a custom large button at the Start menu/tile interface for XBMC (needed to customize the tile with the XBMC logo, but wasn't tough). I also added the Netflix tile right next to it, large as well.
I installed Chrome (browser of choice) and created two smaller tiles that were links to bookmarks in Chrome, YouTube and Google Music.
Change the background of the Start/tile interface to something dark with a little bit of a pattern. Looks very clean and crisp.
I use a Logitech K400 right now. I have a Logitech 650 and Flirc I want to finish setting up, but I haven't had the chance to tinker with that aspect yet.
Overall, Windows 8.1 and XBMC + Netflix works really well. The Netflix app is stellar and XBMC keeping XBMC full screen (hitting "\") and just hitting the Windows button to get out of it/go to Netflix is very smooth and user friendly. I prefer it over the Apple TV and my Ouya by far.
And I built it with the very affordable Intel NUC DN2820FYK, which accepts 2.5" HDs.
I'm less familiar with this area but I believe either of these would suit your needs:
https://www.parts-express.com/dayton-audio-dta-120bt2-class-d-mini-amplifier-60-wpc-with-bluetooth--300-3803?utm_source=google&utm_medium=cpc&utm_campaign=pla&gclid=EAIaIQobChMIvJaXrZ3J4wIVj4vICh19MA91EAQYASABEgLD4fD_BwE
​
https://www.parts-express.com/dayton-audio-dta-21bt2-100w-21-class-d-bluetooth-amplifier-with-sub-frequency-adjustment--300-3831?utm_source=google&utm_medium=cpc&utm_campaign=pla&gclid=EAIaIQobChMIvJaXrZ3J4wIVj4vICh19MA91EAQYBCABEgLCQvD_BwE
​
I also found a comparison video on reddit for these two:
https://www.reddit.com/r/BudgetAudiophile/comments/9ba6x8/dayton_audio_amplifier_shootout_dta21bt_vs/
​
Also, I didn't realize you were playing audio from your computer. You'll need something like this to run from the line out of your laptop to the Lepai or Dayton (or edifier):
https://www.amazon.com/AmazonBasics-3-5mm-2-Male-Adapter-Cable/dp/B01D5H8JW0/ref=asc_df_B01D5H8KO2/?tag=hyprod-20&linkCode=df0&hvadid=167146065113&hvpos=1o1&hvnetw=g&hvrand=4591896362316768558&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9011555&hvtargid=pla-303037967706&th=1
​
Unless you have some digital output from your computer that the Edifier accepts, a USB audio interface is preferred for connecting a computer to external speakers. This is mainly because the onboard DAC of a computer (or television) is (usually) not high quality. You will have this issue with the Edifier as well. I wouldn't worry too much about this at this point.
​
If you were to stick with the Lepai, you'd just plug your headphones directly into the computer aux port and not use the lepai at all (as it does not have an aux port).
​
Pros compared to Edifier: >$100 cheaper, better sound (probably debatable, I've not heard the edifiers), passive speakers can be used with an AV receiver if you decide to upgrade in the future to an AV receiver for surround sound
​
Cons: No remote, extra interfaces required for different inputs
​
If you are wanting to input from a variety of sources (ie. TV and computer) you may be better off with the Edifier since you do not want to get an AV receive
I like that kit you recommended. Here's the same kit on Amazon - out of stock, but it has a more direct URL, and lists things better.
The kit looks like a great value, but I can't tell - does that kit have an adapter included with all the the other stuff that will let me plug in my FM antenna (f-type connector)? If not, I have to buy one separate.
Thanks for looking on eBay! I've decided (for now) to make my life a little bit easier and just hook up the speakers to the turntable, and I got an RCA volume controller for like $7 which is a lot less money haha. So now, hopefully, this will be my chain.
I'm just connecting the RCA volume controller in between the turntable and speakers, and then will have an RCA to TS cable to connect the controller to the speakers. I'm hoping this is all I need!
My thinking is that I'll evaluate how much I miss not having good speakers to play Spotify out of, and if it's worth going through the huge hassle of getting the switcher etc. Maybe when my budget is higher I'll be less anxious. In total, I just spent a little over $200 on this project...not bad!
yeah I don't see why it wouldn't work. you might not need an HDMI splitter if you're using an xbone.. I'm not 100% sure but you might be able to disable the HDCP in your settings somewhere. I know you can on ps4.
idk if mlbtv does 60 fps so you might not be able to do that, but I'm pretty sure it would work otherwise. if you need an HDMI splitter, heres an Amazon link to the one I use.
edit to add: just a thought but you might be able to just use something like OBS to record.. like in your PC browser or something lol. I'm just telling you what I use but I know there's people that do all this stuff without using a PVR. maybe check in with some of the giffers on /r/soccer and /r/nba.
budget/used mid-fi here looking for a desktop headphone amp under $175. Or should it be a headphone amp/dac? Or should I get a headphone amp that has preamp outs, to put inline with my speaker amp and DAC? Maybe a tube amp, as all I listen to is Grateful Dead recordings from the 60's-early 80's and think a tube might fit the character.
My bedroom setup is pc --usb-->
Cambridge Audio DAC Magic --rca-->
Micca Origain speaker amp/DAC --> Elac B6
This leaves no room for headphones, which I currently power off a cheap usb card that came with a gaming headset. I have a bunch of chifi IEMs, and a couple low (~32 ohm) impedence headphones for now, but am planning on buying something more demanding soon.
The DAC magic is an older usb 1.0 model that only does 16/48, but apparently has high-end technology that upscales everything to 24/96 (or higher I iirc). It also has balanced xlr input/output which I have no use for. Anyways I can tell a slight edge and prefer it over the built-in DAC on the Origain, even though that does 24/96 over usb (and I have close to 100gb of 24/96 flac music...).
The Origain is cool but I think it starts to get channel imbalance when knob gets below 25%, which is usually where I keep it. So I wonder if a pre-amp with volume control could help optimize that better? To use the Dac magic, I'd need a headphone amp with line outs anyway.
So for under $175, would you go for:
+newer DAC would allow me to natively enjoy my 24/96 flac, or even DSD
-still might not be as good as the dacmagic
+Might allow me to turn Origain's knob higher to prevent imbalance at lower levels
-Should I avoid having another device in the signal path if I can?
Also, instead of going for a headphone amp/preamp, could I just use a blanced xlr to unbalanced rca adapter on my Dac Magic to use a cheaper standalone amp like the Bravo 2?
Ideas: cheap tube amp like LittleDot Mk2, littlebear P7, xduoo TA-01, Bravo Audio Ocean Mini
or digital: Bravo S1, FX Audio DAC-X6, DEAFidelity Elfidelity, SMSL VMV V2, SMSL M6, Audioengine D1, or FiiO E10K
I'm scraping together pennies to put down on some cans soon. Either AKG 7somethings, Beyerdynamic DTsomethings 250 ohm, or Sennheiser 6somethings...whatever pops up on Craigslist or letgo.
Sure. The audio can be a little tricky but here is what I have. The easiest thing would be if your home theater system or tv accepted optical inputs so that you could use the xbox's built in optical and connect if directly to your tv or home theater system without doing any conversions. If that does not work you have to convert the optical to a 3.5mm connection or a rca audio connection (these are the red and white components next to your dvi connection) . The way to do that is by way of adapter or cords. Like others have stated adapters might give you latency problems. So a cord might prove the better way to go. Ultimately for your connection it looks like you will have to go from optical to 3.5mm to RCA audio. Conversely the newer controllers have a 3.5mm connection built into it. So you would just have to go from 3.5mm to RCA audio.
I'll try to find links but hopefully this gives you a starting point.
Edit
Start with this or {this + this} then convert that signal to RCA with this
-In theory this should work
For non-simultaneous playback:
Here's what you could do:
Buy one 3.5mm Stereo Male to Two RCA Male Splitter Cable, and one 2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch. Also get a 3-Way Audio Video AV RCA Switch Selector Box Splitter. That all together is $9.82 US.
Connect the xbox to your TV as normal. Use the RCA cable included with the splitter to connect your TV's audio output to the Splitter's Input 1. You don't need to connect the yellow video connection on that cable. Then use a male 3.5mm Stereo to RCA cord to connect your laptop/iphone's headphone jack to the Splitter's Input 2. Plug the 2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch cable into the Splitter's Output, and connect your headphones to the 3.5mm female end. You should then easily be able to switch between ipod/laptop and xbox/tv sound feeding to your headphones by adjusting the splitter's output switch. This is a very basic setup, but should achieve what you're going for as long as you didn't want the two inputs playing simultaneously.
For simultaneous playback:
Here's what you could do (I admit this is probably a bit of a wrap around way of doing it, but it was fun to come up with):
Buy:
Two Behringer MICROMIX MX400 4-Channel Mixer, one 3.5mm Stereo Male To 2 RCA Male Cable, one Male RCA to male RCA cable, one male RCA to female 3.5mm cable, six 3.5mm to 2RCA female adapter, and six 1/4 inch to 1/8 inch stereo jack adapters. This setup without shipping and handling costs $75.55 US.
This thing only outputs in mono though, so it doesn't benefit your headphones greatly (only one side will play sound). This is why we're gonna get two of them though, and this is the fun part. Check out this picture: http://i.imgur.com/UPMX5j2.png. It has the steps included with a crude illustration. The benefit of this setup is that you can have the ipod/laptop coming in at a different volume than the tv/xbox. Also has space for two more inputs if your ever have more you want to plug in (or to allow a laptop and ipod to be plugged in at the same time).
I... I think that setup would work.
I have a similar problem to yours but instead of a PS4, it's a PC. Basically, I have 2 monitors and I like to switch one monitor from PC to switch and viceversa and my monitors only have DVI and VGA ports. This obviously sucks because I can't switch the monitor output from DVI to HDMI which would have helped a lot instead of the setup i got. I do however got a speaker set that does allow for multiple inputs, so that will work great with my switch and PC in theory. I have a discrete audio card, you should be fine unless you want to route the sound from the PS4 using TOSLINK (I do believe it has one).
So, all I can tell you from my experience... before you buy something like this, is that you do check that the device will let you add an HDMI to DVI converter to the end. In my case (the one I linked) it did not work. I wouldn't get a signal working out with the adapter... shocking i know, because it even says that it won't work with a passive HDMI to DVI adapter on the amazon listing. Anyway, I kind of lucked out because I had bought a capture card in the past and all I have to do is route it to my capture card and use the passthrough function of it (which essentially rebuilds the HDMI stream? I have no idea). I can then use my HDMI-DVI adapter and it works perfectly. The caveat though is that my PC has to be on while I'm playing. Which isn't much a deal because I actually use both most of the time.
But anyway, you obviously shouldn't be buying a capture card for this (unless that's what you want, then the above setup should work fine?), if you do end up buying something like I linked (2+ hdmi switchs with audio extractors) and it doesn't let you use the adapter for HDMI to DVI for your monitor then you can probably get something like this. I haven't test it out so I can't tell if it'll work but it should be doing the same that my capture card is doing. Obviously, it would be best if you could get a 2+ hdmi switch to DVI with audio extractor but there's none i could find.
If you do end up with a setup similar to mine, know this:
And at last, with the amount of money you'll spend on a speaker setup, hdmi cables, passive adapters and the HDMI shenanigans you can probably just buy a 30" inch smart tv for like $100 bucks. Hell, I'm sure you could find old as hell gigantic hdmi tvs for $100 or less. My step dad couldn't get rid of his old as hell 55" tv and had to actually pay money to get rid of it.
I’m a big fan of the Logitech Harmony Companion. Beyond being able to integrate with tons of other smart devices, the remote just feels great.
Logitech Harmony Companion All in One Remote Control for Smart Home and Entertainment Devices, Hub & App, Works With Alexa - Black https://www.amazon.com/dp/B00N3RFC4G/ref=cm_sw_r_cp_api_i_FFgBDb2ECC1AW
I have these and love them; no ragrets.
Do yourself a favor though and use some of the money you're saving to buy these Beyerdynamic velour earpads. They are an AWESOME upgrade. Super comfortable and even a bit better bass isolation.
If you have the room, those 6.5" mid bass driver speakers are big, but still good for desktop. If you don't have the room, smaller 4" or 5.25" speakers with a subwoofer.
Speaker wire or 16 gauge for a few dollars less and self adjusting wire strippers or basic and 3.5mm to RCA cable.
Most any used stereo or AV receiver will cost less be just as good or better than the R-S202BL. It is a bare bones receiver that doesn't have an optical input or a subwoofer output though one that does costs $200 Onkyo TX-8220.
Or go with an AV receiver that also works well for just 2.0 and also has an adjustable high pass crossover for the speakers if using with a subwooer. $150 Denon AVR-S540BT refurbished 5.2 with HDCP 2.2 and HDMI 2.0B for 4K video switching.
For desktop/PC, the popular option is a mini amp: SMSL SA50 $65, Dayton Audio DTA-120 Bluetooth $75, Micca OriGain $80 or $100 with built in USB DAC.
Guides: Intro to home stereo systems, r/Audiophile Getting Started, Beginner's Guide to Home Audio
yes you should bother.. There are amazing headphones that are easy on the ears!! Headphone examples: Koss Porta Pro X & AFK Khans.
You'll hear the difference trust me.. Def purchase an AMP though.
You could pickup an ES100 DAC/AMP. It should be a very noticeable upgrade!
The AFK Khans cannot be powered by the ES100 just forwarning.. Def pickup a Koss Porta Pro X by Massdrop for your first purchase! :)
https://drop.com/buy/massdrop-x-koss-porta-pro-x-headphones
ES100 bluetooth DAC/AMP - https://www.amazon.com/EarStudio-ES100-24bit-High-Resolution-Bluetooth-Unbalanced/dp/B078H4YD2L/ref=sr_1_1?keywords=ES100&qid=1570060944&sr=8-1
If you need a pad upgrade get these - https://www.amazon.com/YAXI-EARPADS-PORTAPRO-Yellow-Orange/dp/B07L869LJL/ref=sr_1_1?keywords=Yaxi+pads&qid=1570060964&sr=8-1
My wife and I recently moved into our new home and the basement is mine to do with what I please. Naturally, getting my listening station all set up was a priority. It’s not a fancy set up but it looks good and it sounds really good. I’m running a Technics SL-D2, Pioneer CT-M6R cassette player, Onkyo 2 channel receiver, a pair of Chane Audio book shelf speakers, an old Cambridge Soundworks subwoofer that I got when I was in high school back in ‘99 but it adds some really nice beef to the sound. The only thing I might change are the speakers. I may opt out of using those stands as they are not very sturdy on the carpet. I was thinking about getting these:
VideoSecu One Pair of Side Clamping Bookshelf Speaker Mounting Bracket with Swivel and Tilt for Large Surrounding Sound Speakers MS56B 3LH https://www.amazon.com/dp/B000X9O8SI/ref=cm_sw_r_cp_api_i_78m0Cb1456B4H
And mounting them to the posts. Anyone have experience with these mounts? Thanks.
A remote control will work by sending out pulses of infrared light. There is a sensor on the device - TV, DVD, stereo, yes, even your ceiling fan - that can see the IR pulses, and reacts accordingly.
You can actually see it yourself. Point any IR remote at your phone's camera, press a button, and you'll see the LED in the end of the remote lighting up.
Each device has a specific set if pulses to react to. This means you can have multiple devices, but only have the one remote control one device.
A universal remote will copy these pulses. Devices like the PUCK will have pre-programmed devices you can control. The PUCK has the feature that you can control it via Bluetooth with your smart phone.
If your smart phone has an IR blaster you can download an app like Suremote and have your phone work as a universal remote.
I have a very similar remote to this one. These type of "learning" remote has the added advantage that if a button isn't working correctly, you can programme the universal remote from your existing remote.
Analog to Digital Converter
3.5mm to Male RCA
This is basically your option outside of buying a new soundbar or TV. Also look into some of the budget speaker setups on this subreddit. It will absolutely kill any soundbar you purchase. Not going to totally shit on you for getting a soundbar like everyone else in the sub but MB42X and a cheap amp off of accessories for less is an awesome beginning to a budget build.
So you will run a 3.5mm jack to RCA cord into the Analog to Digital Converter then the optical out of the converter into the soundbar.
These converters can be a little hit or miss with my experience so look around to find the one with the best review. I find monoprices stuff is pretty good. If it doesn’t work maybe try a little more expensive and reliable one.
If you already have a 3.5 you can find an adapter online for 3.5mm female to male RCA
Which is this
If you don't have a pro studio, get the KRK 5's rather than the larger models. Be aware that the 5 and 6 lack a bit of bass response, but if you have another setup with a sub to test on you should be fine.
This was recommended to me as a good USB sound device to hook up a pair of monitors. I ordered one and it's currently in transit. It seems to be a good price and quality.
For cables, with this particular device, I got an RCA + 1/4 inch stereo cable. The RCA goes into the USB device's output, the 1/4 inch into the KRK's input. Balanced or unbalanced shouldn't matter if you aren't stretching cables beyond just a desk setup. Be aware that high-polling device, mainly mice, may cause noise if they get close to your cables though.
I know little about MIDI keyboards, but I've heard good things about Oxygen and Axiom. I'd say go with 49 keys.
Also, passing on advice here: When starting your system, turn your monitors on last, after your computer, with the volume on the back all the way down, then turn them up and use. When you are ready to shut down, turn the volume all the way down on the back and then power the monitors off first, then your computer. In other words, monitors are last on, and first off.
Recently upgraded my Hackintosh build with some better sound equipment. I chose some Definitive Technology Studio Monitor 350's which are hooked up to an old Onkyo TX-SR305 that I had lying around, fed by toslink from my desktop.
I mounted the monitors on the wall with some brackets I purchased off of Amazon-- a pair of VideoSecu MS56B 3LH. For $35 shipped, I have to say these are really great quality. The brackets are beefy and are rated for up to 33 lbs., which far exceeds the 14 lb. weight of each DefTech. The hardware, when tightened down, does not sag.
The studio monitors themselves are also a great value, currently clearanced at $149.99/pair at NewEgg with $2 shipping. I've always liked Definitive Technology as a company, and these bookshelf speakers far exceed anything else I've heard in this price range. Part of this is thanks to the passive radiators they have on their outer sides for bass.
In total, this upgrade was less than $200 and my office is now far more enjoyable to work in. I also use my desktop as a media server to house my music collection. As you can see in the last photo, my library is 342GB (47,918 songs) of V0 MP3s that I have hand-tagged myself.
I dunno, I'm happy with my $50 Logitech Harmony. Programming is tedius, but once that's done I don't have to touch it again. Controls multiple devices from a single remote and supports macros.
But my favorite is still my trusty old Harmony 550. Then again it didn't cost me $400. For that much money I'd expect it to cook me breakfast too.
Lights: I prefer switches over smart bulbs. I have a lot of the GE toggle and dimmer switches.
Entertainment: Logitech Harmony remote with the hub integrates well. If their setup is simple, the Companion is decent. If it is more complicated you might want something with a screen like the Elite
Security: I think Ring is more open, Google seems to be locking nest down so it doesn't integrate with other things as well.
Additional things: Look into getting a fire tablet and running Action Tiles. I like it to see the status of everything and know what is on/off at a glance. Thermostat, Smart locks, garage door opener, sensors on other doors/windows are other things that can be added in the future.
I have the Harmony Hub/Smart Home. It is the boring looking remote, but don't let it's loks fool you, it is one of the most powerful. You can also use your smart-phone too, which is nice if the remote is JUUUUUUSSST out of reach. :)
Check out this one if you have smart lights/plugs.
And this one if you want the same one with no home control buttons.
Once you get it set up (it could take an hour+ if you arent familiar with the software) it is amazing!
You probably have a Harmony Hub based remote which has been available down to around $100 if you dig for it. That line has been discontinued and replaced with a nearly-identical line of Harmony Home Control devices. The new Harmony Home Control line hasn't been discounted anywhere that I am aware of, outside of a trade-in deal from Best Buy.
The Home Control series adds the ability to interface with some HA devices like Nest and SmartThings. They have promised that an upgrade for existing Harmony Hub users will give them these capabilities sometime "early [this] year" (it was "late [last] year" at one point, so don't hold your breath). It has also been noted that this will not be a free upgrade.
Just like removable batteries and physical keyboards, there’s basically no chance of it coming back. The truth is that the general public doesn’t care, just look at the sales figures from the Note 10/10+ despite the Internet and reviewer outcry about it not having a headphone jack.
Also... there is not much difference (if at all) in sound quality between most onboard DACs and a decent pair of Bluetooth headphones specially while streaming (of course there is exceptions like some older iPhones an the LG V series) and most people wouldn’t care anyway, and those who care like the audiophile community have been using external DAC/AMPs for a while and are moving more and more towards 2.5/4.4mm balanced.
As for options, you can get the EarStudio ES100 so you can use your favourite wired headphones again.
If you are completely against Bluetooth, and since you listen to 18+ hours a day of music, maybe getting a DAP is a better option for you.
Or get an “older” phone, the S10/S10+ still have the headphone jack.
I don't know if you've solved this yet, but I purchased the following:
https://www.amazon.com/dp/B00ZGGG3KY/ref=cm_cr_ryp_prd_ttl_sol_0
And they worked wonderfully, improving comfort and spacing. Only thing to note is that they have a bit of a tight fit at first, but they do go on.
Do you already have a nice gaming PC?
$50 - Steam Link
CPU | Intel Core i5-4460 3.2GHz Quad-Core Processor | $181.83 @ Amazon
Motherboard | Biostar Hi-Fi B85N 3D Mini ITX LGA1150 Motherboard | $71.98 @ Newegg
Memory | PNY Anarchy 8GB (1 x 8GB) DDR3-1600 Memory | $32.99 @ Amazon
Storage | PNY CS1211 240GB 2.5" Solid State Drive | $59.99 @ Amazon
Video Card | Gigabyte GeForce GTX 950 2GB Dual WindForce Video Card | $149.99 @ Amazon
Case | Silverstone Sugo SG13B Mini ITX Tower Case | $39.99 @ Amazon
Power Supply | EVGA 430W 80+ Certified ATX Power Supply | $32.74 @ Amazon
| Prices include shipping, taxes, rebates, and discounts |
| Total | $569.51
Not cheap, but the Logitech Harmony Home companion should work well. Logitech Harmony Companion All in One Remote Control for Smart Home and Entertainment Devices, works with Alexa https://www.amazon.com/dp/B00N3RFC4G/ref=cm_sw_r_cp_apa_.vhAybCVYG7EV It should be able to pair via Bluetooth to the mi box and control the TV via IR.
the focusrite 2i2 doesnt have extra RCA outputs. Im using one of these to connect the two.
http://www.amazon.com/Mediabridge-3-5mm-Male-2-Male-Adapter/dp/B004YEBK66/ref=sr_1_5?ie=UTF8&qid=1394236955&sr=8-5&keywords=mediabridge
Im actually starting to like the amp in the chain. The midrange isnt as present but it still sounds relatively neutral. The vocals are a touch more forward and present. I think this is what the headphone is supposed to sound like. I changed my sourcc removing the audio interface and connected the ipod. It sounds the same as if the amp was connected. I think the amp connection allows the hd600 to sound "normal" and while connecting straight to the audio interface, it was enough power but not quite there. It still sounds pretty good either way. Cant complain, thank you everyone! I figured that if you use max volume on the audio interface when the amp is connected it sounds just fine.
Getting your antenna up to the attic will definitely make a difference. An amp will help too. Though, as I noted in another post, the homemade just didn't cut it compared to a well-made antenna.
But, it's worth noting that I tried a LOT of antennas and found the more expensive antennas didn't perform significantly better than the cheaper ones. The $40 Terk HDTVa blew away some high-end antennas that were like $150. I went to Best Buy and bought all the antennas they had in stock, tested them all, and kept the one that performed the best. The comparison included the homemade one too.
For desktop listening I'd recommend nearfield monitors, as they're designed for exactly that listening environment:
Edit: Almost forgot, if you wanna go with studio monitors I do also recommend getting a separate DAC for them, such as:
And since they are active speakers, you can save precious desk space by not having to make room for a separate amplifier! 👍
But if you do have the space for it, hi-fi bookshelf speakers with an integrated amplifier are of course not out of the question:
And for integrated amplifiers:
I run a MX3 but don’t think it’ll drive any of those speakers Well as it’s 35-40 watts per channel and maybe 25 watts Clean......
I would run a receiver but if you can’t then stronger mini amp Like SMSL SA98e but it doesn’t have remote or headphone amp - just an amp. You could run a mini stack - dac/Headphone amp Plus an amp but would be above your Budget at $180-$250ish up to $400ish
PSAudio Sprout II would drive your any of current speakers including towers and is also a dac and headphone amp and remote But runs $599
BUT it’s American Made with Good Quality and Warranty and Support.
https://www.psaudio.com/products/sprout100-integrated-amplifier
I would keep the towers and sell the Rest and get a Sprout II or a ChiFi mini stack..........
SMSL AD18 might drive the Polk 70s but Not to potential. It’s weak point is the headphone amp from what I read...........but will drive Lower ohm headphones
https://www.amazon.com/SMSL-AD18-Bluetooth-Decoding-Amplifier/dp/B01M3ULDG9
.
https://www.amazon.com/DX3-Pro-Headphone-Amplifier-Bluetooth/dp/B07KG9P3X3
Or (no remote)
https://www.amazon.com/Audioengine-D1-Converter-Headphone-Amplifier/dp/B006IPH5H2
Or ( no remote)
https://www.amazon.com/Fosi-Audio-Converter-Headphone-Pre-Amplifier/dp/B07G2NQYLX
Plus
https://www.amazon.com/TDA7498E-Audio-Amplifier-Receiver-Integrated/dp/B077GWVHHN
Or
https://www.amazon.com/SMSL-SA-98E-TDA7498E-Digital-Amplifier/dp/B01N19ZHVV
Or
https://www.amazon.com/Dayton-Audio-APA150-150-Watts-Amplifier/dp/B000VKXLBO
All the Chinese made amps overrate the wattage or post max wattage at 4 ohms in distortion level - either way Clean wattage at 8 ohm is usually much lower.......
Or Sell Everything and get the MX3 and Bookshelf Speakers.
MX3 has some quality issues reported - Mine has been Great for 2 months till other day usb/optical quit working - I tried to take it apart to look for bad/cold solder joints but couldn’t get the board out more than 1” so put it back together and it’s working Again ? - Not Sure about longterm use on this thing.......
I have a channel and my setup works for my ps4. First, gonna need a recorder. I use a hauppage hd pvr 2. They've gotten newer ones since. The thing is you will need to bypass hdcp. They have a method that turns off hdcp but i don't know how well it works. The ps4 function only works for 15 minute chunks. For audio i use my phone and mic. I think the hauppauge official program works, but my laptop isn't beefy enough.
For the bypass is use a powered splitter i got off amazon.
This is the splitter i use. Super easy and works fine. Have had 0 issues with it. Hope this helps.
No, but you could get an IR remote and receiver. There are fancy ones too but come at more cost.
As far as I know, you would need 3rd party software to accomplish switching monitors such as MultiMonitorTool. Assuming you have windows 8 64bit, here is the direct link.
target
to look like this:C:\MMT\MultiMonitorTool.exe /switch \\.\DISPLAY2
Press OK. Then use the shortcut to toggle display 2 on and off.
you would be better off with one of these. https://www.amazon.com/RTL-SDR-Blog-RTL2832U-Software-Telescopic/dp/B011HVUEME/ref=sr_1_1?ie=UTF8&qid=1500058787&sr=8-1&keywords=rtlsdr
they have a protective metal case which helps with interference.
antenna wise you could build a planar disk antenna, it's pretty simple.
http://www.wa5vjb.com/references/PlanarDiskAntennas.pdf
the stock antenna is OK for FM and will receive a lot more than you expect. but with a good antenna the weak signals will just get stronger and more signals will pop up. but I easily went a few months before I wanted to have something stronger than the stock antenna.
Sony MDR-7506
They've been a standard for professional audio engineers for decades for good reason - and they only cost $79.99 on Amazon.
I've had mine since the mid-90s and have traveled around the country with them crammed in a backpack and they have held up like a champion. I keep saying I'll replace them with the same model if they ever die, but they just keep working.... The only issue is that the ear pad covering wears away over time, but this is easily fixed by purchasing BeyerDynamic velour pads. These pads are super comfy, and well worth the $23. They're not just a replacement for the original, they are an upgrade.
They are super durable- Once you get the ear pads replaced, they can last for years. I've had mine for a few years; used them at home and on the job (live sound) daily. They still work good as new. Great cans. I'm glad you like them!
If you post your TVFool.com report we can help you pick a good antenna for your area.
But if you want to try an antenna you can either make an antenna or get a Cheap rabbit ears with the loop / flat center thing and see if you can pick any thing up with either of those.. (or you can try a metal uncoated paper clip bent like an L in the antenna port of the TV, If you have any very strong signals very close to you, it should pick it up)
Just a FYI, if you do want an antenna, don't fall for "HD Antenna" marketing. The HD TV is set up by the broadcaster, and picked up by your tv tuner. All antennas are just conductive metal (usually copper or aluminum) shaped to pick up the different Radio Frequencies. Not much more. It's why rabbit ears are moveable, so you can shape them to pick up different VHF signals better.
In the near future of buying some pc stuff and other peripherals, i came across a thought of "which DAC for my dream speakers should i use?" So I plan on getting these sweet puppies:
http://www.amazon.com/dp/B004H0MQYW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=17VDCKL4LO5IJ&coliid=I5C4DPHEWA9D4
But obviously to get the best sound, I'll need a DAC or an amplifier.
Here's some I have in mind:
http://www.amazon.com/dp/B006IPH5H2/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=17VDCKL4LO5IJ&coliid=I1S7F043SU6CQK
http://www.amazon.com/dp/B003Y5FRNS/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=17VDCKL4LO5IJ&coliid=I1FYZ24Y1G14AO
Help me choose? i want to get a good DAC but I really want to get the cheaper option. HEALP
EDIT: Here's the original thread for better formatting.
I already said this on another post, BUT if you ask me, for the money and build quality you can't beat Schiit Audio.
Pick up a MAGNI "HEADPHONE AMP AND PREAMP" for $99, a MODI "DAC" for $99 - $249 for the multibit version. So between $198-and $348 you can have an outstanding smi-portable DAC and Headphone/Preamp.
You will need a set of RCA cables to connect the DAC to the Headphone amp. As for connecting your smartphone you will need this USB 2.0 OTG Cable On The Go Adapter and then you will then need to connect that to a USB A-B Cable. Plug the "B" end of the USB A-B cable into the Dac. Additionally you could have skipped the DAC altogether and ran a RCA-to-3.5 cable right into the back of the headphone amp. But if you are aiming to take advantage of the HiFi/master audio I would recommend you use the DAC method. Connecting your laptop is just as easy and you can just run the USB A-B cable into the DAC. Or, if your computer has an optical audio output you could use a Toslink cable to connect direct into the DAC.
your all set man. get after it.
> I've never seen or used a line-out from a computer so I'm assuming this setup's line-out is what you are talking about (what cable would be used to run from this line out to a DAC? It looks like just a 3.5mm jack, same with the other 5 outputs): http://i.imgur.com/MlZCNhc.jpg
Line out is an analog signal, so you wouldn't run it to a DAC. It's labelled number 9 in the picture you posted, and runs straight into an amp with a cable like this one.
However, the onboard audio of computers is often pretty bad (there are exceptions - some newer laptops from well-reputed brands are decent), and I'd usually instead recommend something like the UCA-202 I mentioned.
> I may just get the AudioSource Amp One anyway and still get a USB DAC or line-out to a DAC.
No, seriously search Craigslist (or if you're outside the US, a local alternative like Kijiji or Gumtree) for any of the brands I mentioned. You'll get something that is both better quality and is easier to resell (not to mention that it'll hold its value much better).
> So your saying, if i change all the settings in Game Mode, and then turn game mode off, all these settings will save? So if i switch bak to Dynamic or movie, and it changes everything back, when i turn game mode back on, these settings will adjust again?
Correct! I know it's a pain in the ass (I have to switch mine every single time as well) but you could always invest in a Harmony 650 remote (one of the best things I've ever bought, and I hate most programmable remotes) and set up a macro so it's only one button press and the remote will do the work for you.
https://www.amazon.com/Logitech-Harmony-Infrared-Universal-Programmable/dp/B004OVECU0/ref=pd_lpo_23_bs_t_2?_encoding=UTF8&psc=1&refRID=02GYJK0FYWE9NHSGDC9E
seriously one of the best things I have for my "game room" one button press and it switches to the system on I want to play, to the correct HDMI on the receiver, while turning the other system I was playing off. Works wonders for having 4 game systems and a 4k bluray player. One button press does it all, including turning what you want on when everything is off.
Nice! First thing i noticed was 3 remotes. When i first started my very first setup one thing that changed my life was this remote right here: https://www.amazon.com/Logitech-Harmony-Infrared-Universal-Programmable/dp/B004OVECU0/ref=sr_1_19?crid=2EXCQYES8ZHGZ&keywords=logitech+remote&qid=1565108225&s=gateway&sprefix=logitech+r%2Caps%2C206&sr=8-19
It was inexpensive on black Friday @ BB for about $20-25 some years ago. It controls 8 devices including, at the time a bought it, the PS3 ( needed an $10 adapter though). Really easy to set up and they still work perfect. Been almost 10 years.
​
But a really nice clean set up.
So your sennhesier gsx 1200 is currently what is giving you the virtual surround sound. So if you get rid of that amp youll need another amp that offers virtual surround sound, which is pretty limited.
​
In other words if you just switched amps you may not have the ability to do that. unless you changed your headphones as well.
​
Arctis pro headset DTS virtual surround 32ohms
https://www.amazon.com/SteelSeries-Arctis-Fidelity-Gaming-Headset/dp/B07B32GY9Z/ref=sr_1_3?s=electronics&ie=UTF8&qid=1549572900&sr=1-3&keywords=arctis+pro
​
Audio Engine headphone amp/dac This unit sounds really good and fits perfectly on a desktop. With a 32ohm load it should go plenty loud for you.
https://www.amazon.com/dp/B006IPH5H2/ref=sspa_dk_detail_3?psc=1&smid=A17IVE6SUAZA2P
​
This unit I've never used before but I've always read good reviews and im sure it could power a 32ohm load no problem. Great price point.
https://www.amazon.com/FiiO-E10K-Headphone-Amplifier-Black/dp/B00LP3AMC2/ref=sr_1_3?s=electronics&ie=UTF8&qid=1549573059&sr=1-3&keywords=headphone+amp
​
The Audio Engine D1 and the Arctis Pro should be a solid pairing.
​
​
​
Pretty much. I'm using the HyperX Cloud II, so I had to take the 4-pole male and have it split to two 3.5mm male to separate the mic and sound using a headset to PC adapter. I'm using something like this.
Here's a wiring diagram with a Modmic.
To get the chat to work appropriately, you need to smash the party button on the chat adapter until it's 100% party (it beeps).
Here's a link to another thread on the subject if it helps for point of reference.
*Edit: If X1 supported generic USB audio like the PS4, this is what the wiring diagram would look like. So much cleaner and no cables anchoring the wireless controller.
Yep Schhiit dac and amp are fantastic and the HE400 is as well. Can't go wrong with that combo!Schitt ModiHifiman HE-400
Getting into magnetic planar speakers will get you into a whole other class of audio.
Magnetic planar speakers love power so a Magni wouldn't be bad either but that's over the $500 mark but it's not really required. Also the modi have rca outputs so you'll need something like this http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTEEDIT:Skip the modi and just get a Fiio E10 Sorry screwed up on the dac deal but the HE-400 is still worthy by and the Fiio E10 will perform as a good dac and amp.
I agree with pagonda, I'd return them.
This ;)
Okay, I can't pick just one, so I present you the following. As you'll notice, all three are practical items, but that's because most people would/could use them all.
Most comfortable keyboard I've ever used.
Best remote control ever. Seriously, this thing is easy to program and can be customized any way you want. It's only limitation is the 5 device limit, but that's still enough for most (even me!). This is the model I have, but you may find another model by the same brand that better suits you.
This umbrella is not only head-turning cool, it's also really great quality that's above and beyond what you would expect from something that looks like a novelty. It's even cooler to me because I actually do Japanese swordsmenship, and the other members of our club/dojo are jealous.
Awesome. Thanks for the reply, so using this card looks like it would be better to build my own capture DVR rather than using the haupauge pvr?
So I'd essentially build a small efficient pc running Linux, add the colossal 2 as hdmi input and then use the ir blaster with the scheduler to change channels.
Would this pc need anything else other than a cheap motherboard/cpu/memory/hdd/psu and colossal 2 capture card?
Edit: quick hit of research says I would also need this? http://www.amazon.com/gp/aw/d/B004F9LVXC/ref=pd_aw_fbt_147_img_2?ie=UTF8&refRID=15JKGZ2G9EX913KRTHQT
VideoSecu One Pair of Side... https://www.amazon.com/dp/B000X9O8SI?ref=ppx_pop_mob_ap_share
The arms are hollow so I ran the speaker wires through them. I also used some Velcro cable ties as some extra insurance that the speakers won’t fall out. I think the arms are good enough but it made me feel better. I’m pretty happy with them.
Sennheiser HD 558
"Open" headphones, which means the outside parts of these headphones aren't solid. And because it's open...
-------------------------
Audio-Technica ATH-M50
"Closed" headphones, which means the outside parts of these headphones are solid. And because it's closed...
-----------------------------------------
Both are pretty good headphones, and there are pros and cons to each. Just remember to consider what kind of music you listen to, what kind of games you play, and whether or not people will be around you when you're listening to stuff! If portability is a concern, the ATH-M50x can fold up into a more compact shape if needed whereas the HD 558 can't.
And welcome to the audiophile world! Your wallet will cry!
Come stop by /r/headphones whenever you want!
Oh I have no idea what cord the H151 has. I've never used it, but sometimes people miss out on it so I thought maybe that option would of help. So is it just one usb that works both as mic/sound. Or is it like aux output thing where it's mic/sound in 1. If so that's your problem(2 in 1 cord non usb). Although it's an easy fix just pick one of these up https://www.amazon.com/Maeline-Female-Plated-Headphone-Splitter/dp/B00PYZ2BT4/ref=sr_1_2?ie=UTF8&qid=1483076629&sr=8-2&keywords=mic+and+headphone+splitter
only laptops as far as I know besides phones have the ability to use 2 in 1 cables. Since most desktop's don't include it. You can do that or go USB choice is yours :)
I bought one of these and it might be the best investment ever. Totally worth it. It swallowed up all of my remotes, now controls my lights and it works with my Echo/Alexa. Thank me later.
Logitech Harmony Companion All in One Remote Control for Smart Home and Entertainment Devices, Hub & App, Works With Alexa - Black https://smile.amazon.com/dp/B00N3RFC4G/ref=cm_sw_r_cp_apa_i_hw.gDbVANFWFV
I replaced the earpads on my ATH-M30s (non x) with BRAINWAVZ hybrid pads and they are super comfortable and improved the sound stage of the cans. If comfort is a priority for you, I would factor in the cost of aftermarket earpads. You can get the newer ATH-M30x and some good pads for about $100.
These are the ones I got:
https://www.amazon.com/Brainwavz-Replacement-ATH-M50X-HifiMan-Headphones/dp/B00ZGGG3KY?ref_=ast_sto_dp&th=1
A KVM is possible, but the big advantage of a KVM is that it not only allows you to share a screen across two sources, but also an attached keyboard and mouse. Unless you intend to use a keyboard and a mouse with your Switch, I'd go for a far less expensive, 2-port HDMI switch. That's all you need if you're only concerned about video. Plus, I'd argue it has more future utility. It'll be smaller, because it has less ports and the ports it has are smaller. You could bring it with you when you travel and hook multiple things up to HDTV's at hotels or friends' places. Plus, most newer displays have HDMI ports. Buying a DVI KVM (or even a DVI-only video switcher) is going to be more expensive and clunkier.
Here's an example of stuff that would work. I am not endorsing these products at all, I'm just picking the first well-reviewed looking hit from my search results (on Amazon):
search terms: "2-port HDMI switch"
looks good: DotStone HDMI Switch Bi-Direction only $8.. You won't get anywhere near that with a KVM.
and then, with search terms "HDMI to dvi", you could probably use 1 or 2 of either these:
HDMI to DVI (cable)
or these HDMI to DVI (adapter)
If you have a ton of extra hdmi and/or dvi cables, you might prefer the adapter, otherwise you could use it on its own in cable-form. Keep in mind that in a typical setup, the Switch's audio is going through the HDMI cable as well, and whether you used a HDMI switch or a DVI KVM/switch, the connection to your monitor is going to have to terminate in DVI, and that DVI won't carry the audio. Does your monitor even have speakers? Even if it did, you most likely won't get any audio over DVI. I haven't tested this myself, but I just did a little research and found you can use the headphone jack on the Switch, while docked, to get it's audio, so depending on what's going to be playing your sound, you might need one or more things from this list:
stereo miniplug cable (male to male) - for going from Switch to portable speakers or anything with a line-in
miniplug couplers - handy if you need to plug the above into another male cable
miniplug to RCA adapter cable - for going from the Switch to a stereo system or similar
​
​
Looking good, but I have two inexpensive suggestions: get this for a PC stand and get this for your headphones
I just received the glass stand and I like it a lot, used it to raise up my monitor and free up space for my keyboard and my backup HDD. It'd fit/look a whole lot better than that silly AC retail box ;)
Here's the best way to handle this. I'm making assumptions that you have a smartphone and the RCA jacks in your car's armrest.
Get the following.
Take the 3.5->RCA cord and plug the RCA ends into the aux jack inside the armrest. Put the USB charger in the 12v socket that's also in the armrest. Take the bluetooth transmitter plug in the power (with the supplied micro USB to normal USB cord) and plug in the 3.5 end of the RCA cord to the jack on the transmitter.
Once the car is on and the transmitter is powered up, pair your phone to the transmitter per the instructions that came with it. After its paired, put all the wires and the transmitter in the armrest and forget about it. You'll never have to deal with it again unless something goes wrong.
Now take the CD player car mount, and turn it so it's horizontal. Put your phone in it and adjust the sides to make sure it doesn't slide out. Switch your car audio system to AUX and leave it there. The only downside is you can't control the audio from the steering wheel. The only thing you can do is adjust the volume.
Now you have an always updated nav system that has guidance and the ability to listen to all your music via the car stereo. I wouldn't try any other BT transmitter. It's the key to the whole deal and I know that one works. The rest of the stuff is universal and pretty generic. You may have some/most of them already. You can really shop around for the USB charger, RCA cable and CD player mount and get the cost down more. The whole setup should be around $75 or less.
This is by far the most effective, economical way to get what you want. There isn't really a way to update or modernize the stock equipment outside of buying a new car. I'm pretty sure that's by design.
I had a Corsair Vengeance 2100 Wireless Gaming Headset before my new Cloud Hyper X set. It was pretty mediocre, both comfort and soundwise, but it got the job done.
The Hyper X Cloud set is fairly decent and works well with glasses, but is wired. I use an underside headset hanger to reduce clutter, and am pretty happy with it.
For the office. You just need this:
Yea, I know its dedicated, but it seems like you have the extra wiring. If not, then HDBaseT is your option
Regarding your second monitor, all you need is this:
https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E
Regarding the double switching, you could do that. Personally, I would just spend the money to do it right. But, It's not my money :) I bought my 6x6 Gefen off of ebay for like $1100 bucks, but it was admittedly a pretty good deal.
Yes, you’ll need a CC to play videos on your TV. Google Home device is optional.
You can separately purchase a HDMI audio extractor to separate the digital HDMI audio signal from the CC HDMI output to the TV HDMI digital input. The extractor converts the digital audio portion to a 2 channel analog output (or 5:1 channel analog output) that you can use to plug into your stereo (L-R) receiver or amplifier audio inputs. This configuration allows you to watch videos cast for viewing on your TV while listening the show on your audio system. Here’s an audio extractor example that you can purchase that is listed on Amazon.
I routinely listen to digital radio, podcasts and music on my HDTV audio systems either via TV sound bar/woofer connected to my HDTV using just the CC.
I also listen to the same via my audio system without the HDTV being on through my audio CC that are connected to my audio system.
On occasions, I have video being cast (e.g., fireplace video, scenic photography, family photos, etc.) via CC while casting music via audio CC at the same time.
However the audio CCs are very useful to cast digital audio for listening on analog audio systems throughout the home.
Google Home is helpful in that to can start and control all of this using simple spoken commands and, following setup, without tablets and smartphones.
The main purpose for the CC Ultra is to stream 4K video. Yes, there are a few sources (e.g., NetFlix) that can provide 4K video streams. However you need to first focus on having enough bandwidth from your ISP to support the additional demand for 4K Video streaming; and pending that’s in place you need either hardware your CCs to your modem or have a local Wi-Fi router or router system in place to handle your normal device demands PLUS the heavy additional demands needed for 4K Video streaming. Handling the video resolution is the issue, not speed.
However if your planning to buy a 4K HDTV, have enough bandwidth down from your ISP, have enough WiFi (or hardware using optional adapter), have 4K video streaming source access (note that NetFlix requires the purchase of their more expensive premium plan to be able to use a limited list of 4K video) then you may wish to purchase and use a CC Ultra.
Here is a 1 to 2(cable box to two componets) splitter http://www.amazon.com/dp/B004F9LVXC/ref=sr_ph?ie=UTF8&qid=1408799072&sr=1&keywords=hdmi+splitter. Works great. My girlfriend used to complain about everything going through the xbox but I still wanted the xbox TV feature to work and this little puppy made both of us happy. Good luck.
Great headphones! It's one that I always recommend to friends on a budget. As for the replacement pads, you have 2 options the way I see it.
or 2) A lot of people like these Beyer pads for the V6/7506. I've never tried them, but I'm sure you can find more info if you search around.
Either way enjoy the cans!
You should check out the ES100 as a potential alternative to a BT cable. It's basically a Bluetooth dac/amp unit that's been getting really rave reviews.
From what I have googled and tried out, most BT iem cables kinda suck and have pretty lame battery life. At $100 it's just slightly more expensive than a Bluetooth cable but with superior performance (as it also acts as a dac and amp), better battery life and a great mobile app. Planning to snag one up for myself too.
I also own a pair of these and if you want them to be comfortable you may have to grab some $20 velour pads. I have these as well and they make it far more comfortable to wear. I literally have these on for 8 hours after playing Civ and besides them being a little warm (Florida) they're super comfy.
Gotcha, well you can still get the basic hub+remote for $135 it looks. I have this, but never use the remote really, cause everything is exposed as switches to my other systems.
There's plenty you can do if you know how to code, but if you aren't writing plugins for HASS you can get away with just learning some basic YAML pretty much, and there's tons of useful resources on the website.
I use this sensor for a lot of things, including temp/humidity. It's also got a light sensor, if that would be in any way helpful there as well. It shows up in HASS with the assortment of sensors that can then be tied to whatever automations and such.
So far the Bose Sound True II for apple seems pretty good. Too bad the deal wasn't for the android variant of it :( https://www.amazon.com/Bose-SoundTrue-around-ear-headphones-II/dp/B0117RFX38/
Don't think Im taking a chance on those bose earbuds. All the reviews rip it's Build Quality apart. I mean IEM's are mostly plastic but how do you make it that bad lol.
Sennheiser 598's SE are back on sale for 110$ 10$more than the lowest. Pretty good if you want open back. https://www.amazon.com/Sennheiser-HD-598-Over-Ear-Headphones/dp/B0126HISOO/
Pink Cloud II's for 75$ is pretty good. One of the best gaming headsets for your money. https://www.amazon.com/HyperX-Cloud-Gaming-Headset-PS4/dp/B00Y09G6H8/
Beyer Custom Street?!?! what are these? Bassier versions of the custom ones? Now even sure if it's a deal at 99$ https://www.amazon.com/beyerdynamic-Custom-Street-Headphones-Black/dp/B00UK7ZQXO/
Other than the usual cheap ass wood earbuds and shitty gamer headphones this sale seems kinda sad :(
So far pretty good for entry level stuff but that's the "amazon" usual so it seems with every big sale.
edit: So in 2 hours this is supposed to drop in price, anyone hear anything good about these? I might bite to try them out as I'm currently using shit for iems. https://www.amazon.com/dp/B00OQG7IC2/
--
8AM PST these are going to drop in price, I know they are very popular :P https://www.amazon.com/dp/B001B1QENY/ DT880 250 Ohm O.o
--
832AM Brainwavs hybrid pads are lined up for sale https://www.amazon.com/dp/B00ZGGG3KY/
I own a pair of these, they're phenomenal for the price, especially this sale price. Extremely comfortable, great mic and great drivers. I recommend ditching the USB dongle it comes with and using the 3.5mm jack (you may or may not need a splitter).
I wanted to share a couple pictures of the desk set up and also some of the accessories I purchased. My expirience with Fully was great. I got the Jarvis3 with Walnut veneer in a72x60 size. The frame was delivered about 3 days later and the desk top about a week after purchase. The quality is everything I expected! This thing is heavy and stable at all heights. I love this desk!
Pics:
https://drive.google.com/file/d/1E7Vi_PN-sxrfnujw9ZgXZTnQwUT8dTyeLA/view?usp=sharing
https://drive.google.com/file/d/1LBK9sdiy9oULc-dOgY7ElnAcd45jkCCloQ/view?usp=sharing
https://drive.google.com/file/d/1L56J3IP3A9cVEiPSgyNNANwCjJIY4P3blA/view?usp=sharing
https://drive.google.com/file/d/1N0TaD-U1OJlcw7mq8sihXH_obmELsdRv6A/view?usp=sharing
https://drive.google.com/file/d/1Mw-c-78JU_MAIraOlL56jLZuFK-l0lQMDA/view?usp=sharing
Accessories
I decided to get the keyboard tray and accessories from Amazon. The keyboard tray is probably going back because it is difficult to move back and forth.
Keyboard Tray Here: https://www.amazon.com/gp/product/B01M2319VR/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
The Anchor: https://www.amazon.com/gp/product/B00P31BMHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Wiretamers: https://www.amazon.com/gp/product/B01BVYW7UY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
VESA adapter for old Samsung Monitor: https://www.amazon.com/gp/product/B071YFDQKS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Dual Monitor Mount: https://www.amazon.com/gp/product/B018MSDG84/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Clips for wire management: https://www.amazon.com/gp/product/B071L91LBH/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1
Long Power strip: https://www.amazon.com/gp/product/B0036DEC48/ref=oh_aui_detailpage_o03_s03?ie=UTF8&psc=1