(Part 2) Reddit mentions: The best gun parts & accessories

Well the only similar sight that I know of is the Russian version, and I doubt that it's affordable or even exported to the US. The Russians had their older PSO-1 (4x24 unfortunately) and I think HK made a similar mount back in the day. The Aimpoint RDS is a popular red dot that you can then magnify with a...think its called a pineapple mount?

http://www.amazon.com/Mako-Magnifier-Reflex-Sights-Generation/dp/B001LZV55C you can hook this one up to a flipsight and pretend you're in call if duty.
Aimpoint makes the same thing but demands a much higher price I'm sure.

http://www.amazon.com/EoTech-G33-STS-BLK-G33-Magnifier-Switch/dp/B008CXKX7M you can buy the real thing and OH BOY ITS HALF OFF but of course operator gear comes with a huge price tag.

Trijicon makes a 3x version of the acog for 1k, lmao

http://www.amazon.com/Firefield-3x-Combat-Gun-Sight/dp/B006GOK5BI firefield makes a cost effective sight with only so-so reviews on amazon, google shopping brought up 179 reviews averaging at 4.5 stars. Has a small top rail for diddlies, bonus.

I found some other cost effective sights including a copy of the eotech flipsight but it appears that you get what you pay for in the realm of combat sights. You can buy a pretender that works well at the range or you can buy the milspec stuff. There are plenty of good consumer grade options outside of the military stuff but it's up to you. I personally haven't used any of these but of course its hard to go wrong with EO or Aimpoint. Will update this post with more links, at this point I'm just saving ya google time though.

Heres a Vortex 3x that holds a zero at 100 yards according to the top review, but I'd hope people are going to shoot farther out than that with a magnified scope...
http://www.amazon.com/Vortex-Spitfire-EBR-556B-Reticle-SPR-1303/dp/B00HYRGNLM

And heres the eotech flipup clone:
http://www.amazon.com/Sightmark-3x-Tactical-Magnifier-Slide-Side/dp/B004TDPVBW

If you head to primaryarms.com and click on scopes, there's tons of choices there for 3x or 1-4x all at pretty affordable prices.

Zeiss and Trijicon make rifle scopes that hit 3x but ofc those aren't combat sights and the eye relief is going to be small.

A forum posts mentions that you should keep the scope mount below 12 inches so that it doesn't interfere with charging handle operation, keep that in mind if you didn't know. From the same post, someone uses a primary arms 1-4x scope and is happy with it. Once again but a combat scope though.

That's everything that I could dig up, had nothing better to do so there ya go. Hope that helps ya.

Hey, we can always try to help you. Ar15.com might have a better forum but that's a semi-closed off website compared to reddit.

Just from the looks of it the Sig Micro Red dot you posted looks a lot like an Aimpoint T2. The Aimpoint is top of the line (think, best you can really purchase) as far as quality is concerned. I'll be the first to admit I don't hear much good or bad about Sig Optics so I won't act like I know how well they hold up.

An entry level red dot would be something like the Holosun for 170$ compared to the 340$ you might pay for the Sig Dot you mentoined earlier.

In my opinion, there's three tiers of optics you can buy. You can buy horrible Chi-Com shit from China that will cost you 35$ total. You can buy entry level optics like the Holosun, Vortex, or Sig (low price to high), or you can go all in and get a top shelf optic like an Aimpoint, Trijicon, or [debatably] an EoTech.

If you're worried about "overpaying" for low quality, but you're willing to spend 350-400, buying an Aimpoint PRO would be right in your realm. You'll receive extremely high quality glass for a decent price. They retain their value over the years, and if your husband knows anything about firearms, he'll be super happy with throwing it on a rifle. (edit: your post history says your husband is familiar with Special Operations Units, so I know he'll have heard of Aimpoint).

Buying him a Holosun or the Sig red dot would be a good alternative, but if you can justify it in your budget, get him something you know he'll be happy with. An Aimpoint is hard to beat. He can save up another 200$, re-sell the PRO and upgrade himself to a Aimpoint Micro if he's looking for that style of optic down the road.

I actually don't think I am going to go with any of these. More than likely I will go with the Gen 2 Magpul BUIS (Back Up Iron Sights). My gun nut buddy rocks them on more than one of his ARs and swears by them, and I figure I'm going to be keeping them around for a good long while so might as well drop some cash for a proven product.

Here's a link, they run about $70 right now. They have a similar, cheaper set available, but it is usually just used for airsoft.
https://www.amazon.com/Magpul-Industries-Generation-Backup-Sights/dp/B01GDL22O6/ref=sr_1_1_sspa?ie=UTF8&qid=1509597677&sr=8-1-spons&keywords=magpul+sights&psc=1

If $70 dollars is too steep, the Tacticon sights I listed are worth looking at. I've never handled them, but they seem like a reputable company and the positive reviews are just about identical to Magpul's. There was also talk of the UTG iron sights. I checked them out, but the reviews weren't as positive. Sucks, because they look badass.

In any case, my rifle won't be here for about another two weeks. I'll keep a look out for a good sale that may change my mind.

Incidentally, I handled a Smith and Wesson M&P Sport II .22lr a few months ago. I was deeply considering getting a little .22 AR for some cheap practice. It came with some sights that I absolutely loved. Very snappy, great construction, very nice. Turns out, they were Magpul Gen 2s.

Totally agree, wish they had come with the stocks like that from the factory. Laminate stocks are similar to regular walnut/hardwood stocks (just thin layers appoxied/resined together forming an overall stronger bond and stock) I installed mine fairly easily just make sure your pre-drill your holes correctly and measure twice.
There are a lot of resources on youtube

Find the one that best suits you

Its all totally doable yourself but if you feel uncomfortable you could always have a gunsmith do it (but if I could do it myself without messing anything up you should be able to as well) If your rifle has a barrel band (I dont believe your model does) they make adapters to attach to it so you wouldn't have to drill the fore-end. Uncle Mike's are great products and thats what I used but there are other good brands, make and models as well, hard to go wrong with swivel studs. Also if you drill in the forward stud it would give you the option to use a swivel stud bipod

Good luck and enjoy the awesome rifle!

If you're planning on spending more than $150 just save your money and save up for a premium optic like an Aimpoint, EOTech, Leupold, or Trijicon. If you're looking in the 100-150 range, Holosun makes a great solar/battery powered red dot that holds zero well and has a 30-50k hour battery life(when it's actually in battery mode). If you're looking for a more traditional optic, Bushnell and Nikon have good 1-4x optics. If you're looking for more magnification a Leupold
is within your reach. Vortex has strong offerings in both red dots and traditional optics if you're willing to spend a just bit more. If you're looking in the 50-150 range I'd look into a TRS-25 or Primary Arms for a red dot. For a traditional scope i'd stick with a fixed power optic like this Bushnell, you're going to be hard pressed to find a decent magnified optic with good glass in this price range, fixed power scopes are simpler in construction and offer at least better durability but i'd consider sticking to a non magnified optic under the $100 range. If you're trying to spend even less than $50 there is apparently a very well made $20 Fieldsport which is worth a search on youtube. I wouldn't consider anything magnified under $50 but this is a good range for a cool carry handle with elevation adjustment and retro look. Shooting irons can be more fun than using optics sometimes.

Nice. I have the same and love mine. Great looking, good quality 1911 for a decent price.

I put one of these on mine to help improve the grip. It matches and looks pretty good with the black slide stop, thumb, and grip safeties.

These are for real steel guns, and feel really solid, I have no doubt they'll work on GBBRs, but I have an aeg, so I can't base that on personal experience.

I have a Sightmark Ultra Shot QD and it's fantastic. Big glass, multiple reticle, really solid, bright(works in direct sunlight), qd works. I'm very happy with it.

They also make a non-digital non-qd version that's even cheaper, but I really like the QD.

Good luck

Well so far I like the two I've bought. The Sightmark Ultra Shot Sight QD Digital Switch (SM14000) https://www.amazon.com/gp/product/B004TDIDW6/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1. Now I'll start out by saying I've never used an Eotech or Aimpoint and probably never will as I can never see dropping more on a red dot/holgraphic sight than I nearly spent on my rifle. If you can afford it and can justify it and want it go for it. But if your looking for a budget red dot, look at the Sightmark. I know I'm going to get a lot of hate for not picking Primary Arms, Holosun or similar, but they weren't what I was looking for.The two I've got, one's on an AR15 and ones on a AR-9. They were both bought for use in 2 and 3 gun competitions on an outdoor range in bright sunny Florida. I had tried several sights before, Truglo, Trs-25 and found them all to be too dim even on the brightest setting during the day time and the dots to be too small for rapid target acquisition especially in bright sunshine. The Sightmark even on a lower brightness setting was easily usable in the bright Florida sun. Using the 50 MOA circle around the 3MOA dot makes it easy to pick up and engage those close targets rapidly and still accurately on those out to 100-150 yards. I like it and so far even on the AR9 which has a lot more felt recoil it has held up with no problem. I may even buy a third one for another rifle. Hell I'm still not up to spending what even one Eotech would cost me.

Sightmark Ultra Shot Reflex Sight QD Digital Switch

Bottom line is I don't expect to go to war tomorrow, Don't want to spend what a monthly car payment would be on a sight and don't expect to be dropping my rifle from 10 feet onto hard concrete. It has worked without problems for me so far, it's cheap enough I could but four for the price of one Eotech and it does what I need it to do.

Beautiful! I have a 6" stainless GP100 myself. Absolutely love it. I installed this front sight right after i got it: http://www.amazon.com/HiViz-Ruger-GP100-Handgun-Sight/dp/B000EBUG4K

super easy to install and made a huge difference in the sight vizibility.

VooDoo Tactical 20-9421001000 Buttstock Cheek Piece With Ammo Carrier, Black https://www.amazon.com/dp/B007FTARKM/ref=cm_sw_r_sms_c_api_63gEybN9NRE49

Comes in 4 different colors. Ammo carrier is really just for show for 10/22.

The straps are too long but I folded them over and placed the ammo holder over them. Other redditors have cut the straps and modified by sewing to fit the 10/22 better. I don't have a sewing machine and can't sew by hand so not really a option for me right now.

I like the cheek rest though my eye lines up with the scope perfectly now. There may be a better fitting one out there for a 10/22 haven't really looked though.

if you want to add a reflex sight/red dot, it limits you to the Ruger Mk 3/4 versions with a top rail and the browning buckmark versions with rail. You might also be able to add an optic to the Beretta Neos U22 and the CZ75 with kadet kit.

The CZ75 with added Kadet kit would be the priciest option (probably around 800) but will give you a modifiable 22 conversion thats also a top 9mm.

You cant really attach any any optics to the slide of the S&W M&P22 compact, the Ruger SR 22 or the Walther P22 as it would negatively impact cycling. You could attach optics using an underbarrel rail mount but not the most convenient option (https://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/dp/B004O6CDV0).

Overall id say the Ruger MK4 versions give you the most flexibility for the best price. If you dont care about optics the S&W M&P22 compact is also a very good deal.

Red dot then add a 3x flip up magnifier if you find yourself actually shooting at 300 yards often.

Holosun red dot
https://www.amazon.com/HOLOSUN-HS403A-Micro-Red-Sight/dp/B00KOOEZ6W/ref=sr_1_3?s=sports-and-fitness&ie=UTF8&qid=1510950778&sr=1-3&keywords=holosun&dpID=41sEuJwjs8L&preST=_SY300_QL70_&dpSrc=srch

Well reviewed "budget" red dot. 50,000 (!!!) hour battery life so you can leave the red dot on all the time and only change the battery every couple years, great for HD.

For a magnifier, the vortex are reputed to be good, larue makes an excellent one, just get whatever you like

https://www.amazon.com/Vortex-VMX-3T-Magnifier-Flip-Mount/dp/B00BQWTC14/ref=pd_bxgy_200_2?_encoding=UTF8&psc=1&refRID=XBBPB53AR6F40EMBRCZF

> Currently have some on my ar, they're good, but are the $100 a pair good?

Magpul offers models in the 60-70 range, which seem like pretty middle of the road. Price-wise. At least, thats what I observed shopping for flip sights.

• https://smile.amazon.com/Magpul-Industries-Generation-Backup-Sights-x/dp/B01GDL22O6/ref=sr_1_3?ie=UTF8&qid=1540394419&sr=8-3&keywords=magpul+flip+up+sights
  
  I'm kinda deadlocked on the Troy and YHM . . . leaning towards the YHM but I don't either is a bad choice.

Lasers are only used with night vision, and messing with your cat. If you’re ballin on a budget, here are some good options for you.

Red dots:

HOLOSUN HS403C Solar Power Micro Red Dot Sight, Black https://www.amazon.com/dp/B00U2KMVCI/ref=cm_sw_r_cp_api_i_ZpaHDbRH0V0EF

Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight, Black https://www.amazon.com/dp/B01C95I8N4/ref=cm_sw_r_cp_api_i_fqaHDbM4M8RCH

Vortex Optics Crossfire Red Dot Sight - 2 MOA Dot https://www.amazon.com/dp/B079BY7QMC/ref=cm_sw_r_cp_api_i_FqaHDb9P9FBNE


If you want a magnified scope like an Acog, Primary Arms makes the best for the price.

Primary Arms Silver Series Compact 3x32 Gen II Prism Scope - ACSS 5.56-CQB-M2 https://www.amazon.com/dp/B01BOTJGIM/ref=cm_sw_r_cp_api_i_9raHDbFWVPQ8A

If you want something for longer ranges, LPVOs are awesome.

Vortex Optics Strike Eagle 1-6x24 Second Focal Plane Riflescope - BDC Reticle (MOA) with Sport Cantilever 30mm Mount - 2-Inch Offset https://www.amazon.com/dp/B01K37MU52/ref=cm_sw_r_cp_api_i_AtaHDbMAP1GB1

Primary Arms Silver Series 1-6x24 SFP Rifle Scope (Gen III) Illuminated ACSS 5.56 \ 5.45 \ .308 Reticle https://www.amazon.com/dp/B06XD6G7K1/ref=cm_sw_r_cp_api_i_9taHDbC142280
You’ll ya e to get a scope mount for this one, so here that link. Aero Precision Ultralight 30MM Scope Mount, SPR https://www.amazon.com/dp/B00JVTD4EK/ref=cm_sw_r_cp_api_i_SuaHDbJ2D4GYB

May not be a popular opinion, but out of all the red dots I’ve owned I still love the $18 one from amazon for the price.

Recently just picked up a Dagger Defense DDHB and really like it as well. It was $40 but really nothing more but a bulked up version of the $18 one!

Though I always protect my lenses with POLYCARBONATE (not acrylic) I worry less with a cheaper optic. (I always babied my Pilad 1x42 red dot though it wasn’t even that expensive)

I have the Holosun HS403a on my 300blk "pistol". Love it. Great optic.


I got it before they were the 'hot' new thing for $125 shipped on Amazon direct from Holosun. They are now up to $171 shipped.
http://www.amazon.com/HOLOSUN-Micro-Red-Sight-Riser/dp/B00KOOEZ6W

I'd buy that again in a heart beat, more expensive and all.

First, not my EDC. I carried it today because I was feeling good and wanted to ride with my Deagle by my side. It's my pride and joy. So yes it bugs me.

It stays very well, I mount it right in front of the safety switch where its balanced and has a lot of surface area to hit the magnet. I've slammed on my brakes and gone over speed bumps and it sticks just fine.

It's a 4 inch long, 35lb rated magnet. Not the biggest, but shes strong. https://www.amazon.com/Magnetic-Mount-Holster-Vehicle-Home/dp/B01LXCJHKG

I've been really happy with the Vortex Venom that I have on mine. It's a great sight that makes the pistol very 'point and shoot'able.

I figured that the Venom would be good enough since it costs like half of what a Trijicon RMR would and it has a no questions asked lifetime warranty so if you happen to drop your gun right on the sight or something crazy like that they'll just replace it for you. And I also like that the sight window is wider than on an RMR with a thinner bezel which makes the field of view better.

> "I shoot that just fine" is pretty subjective but also a fine standard.

I'm consistently shooting 2 inch groups at 15 feet, I feel that's sufficient in a self defense scenario. The pistol is small but some of that is mitigated with a Pearce Pinky Extension with the extension, I'm able to grip using my entire hand. The Mod.2 appears to make that even better by making the beavertail higher on the grip, bringing your hand higher while lowering the bore axis.

Ok awesome, that's great to hear. How do you like the stock? I've heard that's the thing I've heard that people don't like. I was thinking about getting the Boyds Tacticool stock. I also thought about getting a cheek riser and painting the stock myself.

I wouldn't say MBUS are very durable. They break pretty easy and just yesterday I noticed a pin on a pair of mine walking out without even taking them shooting in a long time. IMO any quality red dot will be less likely to break than MBUS sights which makes them not make much sense as back up sights. There are better cheaper more durable options on Amazon if you are fine buying something made in china

https://www.youtube.com/watch?v=gN3w3BWVZM8


https://www.youtube.com/watch?v=xKxxKayDr9Y

https://www.amazon.com/UTG-Profile-Flip-up-Aiming-Aperture/dp/B0182UM8ZO/ref=sr_1_1?ie=UTF8&qid=1487276755&sr=8-1&keywords=utg+sights

https://www.amazon.com/UTG-Model-Profile-Flip-up-Handguard/dp/B0182VADPU/ref=pd_bxgy_200_img_2?_encoding=UTF8&pd_rd_i=B0182VADPU&pd_rd_r=A51EXZ2Y942CAZCVPYTV&pd_rd_w=XOdOz&pd_rd_wg=Y8Gs8&psc=1&refRID=A51EXZ2Y942CAZCVPYTV

I just bought this scope for my new 10/22. Nothing too fancy but the price was right and my friend bought the same one and loved it. For $180 gun I didn't see myself spending more than that on optics but you can.... easy.

I've been shooting pistols for a few years now and am just now getting the rifle bug. Over Christmas it just hit me... I don't have a 10/22! I wasn't having any of that; and wanting to have a little fun with it, I came up with this.

Here's what it is:

Ruger 10/22 "All Weather" Carbine

Archangel 556 Rifle Stock

UTG Tactical OP Bipod

AccuShot Scope Rings

BARSKA 3-9x32 Plinker-22 Riflescope

I got to sight it in this morning! Nice and accurate as you should expect from a 10/22. Ran subsonic ammo through it and it was nice a quite. I really like the Barska scope too... it did great on its lowest 3X setting. When I have more time I'll see how it does at long range.

Edit* Also Ruger BX-25 mag

This is the swivel set you need. It has a stud that go into the barrel band in front, or use a screw-in one on the stock. You will need to file the plastic on the barrel band down a bit to get it to tighten down right. The rear one will just be the screw-in one.

As Mr. fufu said below, it's not hard to do and basic drill and file sets are always handy to have around, or it should be a pretty easy job for any gunsmith.

Today was day 1 of my first Appleseed and I'm using a TakeDown. Other than the swivels being a little more work to install it works just fine. I would suggest against the Magpul specifically for Appleseed. The QD points are on the side which will make the gun tilt when you use the sling for support, and the cheek weld can be weird for how they teach it. In general I love that stock, just not for this.

I have shot this Vortex Spitfire at the range on a Sig mcx. A really good priced scope, accurate with great eye relief.


Vortex Optics SPR-1303 Spitfire 3x Prism Scope with EBR-556B Reticle (MOA), Black https://www.amazon.com/dp/B00HYRGNLM/ref=cm_sw_r_cp_apa_bljsybA2F50FV

I also like this Sightmark https://www.amazon.com/gp/product/B004TDIDW6 and use it on my TM MP7. Might be a bit big but has a huge window for a great field of view.

As far as a scope I'm not really that informed. You should definitely go check that forum though and just search for scope because they have some very knowledgeable people and it's solely focused on the 15-22.

I actually just ordered a dot sight for mine. I've read some really good reviews on it and I'm excited to try it out once it gets here.

USGI sling can be found here.

If you choose to buy elsewhere, be sure to buy cotton, not nylon. Nylon has a tendency to slip, especially in the loop configuration you'll learn at Appleseed.

You'll also need sling swivels and sling studs. You can get them as a set here.

Tip for installing the studs on your synthetic stock: Start with a small drill bit about 1/2 half the size of the screw on the stud. Pre-drill holes in the stock. Insert a nail through the sling stud and twist it into the stock until the holes are perpendicular to the bore.

You're all set. Good luck and happy shooting.

It's this one: https://www.amazon.com/gp/aw/d/B00S2P2J90/ref=mp_s_a_1_4?ie=UTF8&qid=1522020664&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=vortex+red+dot&dpPl=1&dpID=414HJtOkKXL&ref=plSrch



It came with the gun but I thought it was awesome that it was the exact one I was planning on buying.


So far I like it a lot. My dad has a Trijicon RMR 2. They look the same to me and it's less than half the cost. He put his on a double barrel .470 nitro express for hunting purposes though.

i love using a brass catcher on my ar. best $12 i've spent on it... http://www.amazon.com/gp/product/B004SKCUME/ref=wms_ohs_product

Top is my new Krytac Trident MK2 CRB in Flat Dark Earth with UTG 1-4.5x28 CQB Scope, Magpul MBUS flip up sights, and PTS Fortis Shift grip.

Below that is my brothers G&G CM16 SRXL using the Krytac iron sights and some flash hider. Now used as a backup to his RK74 CQB or used as a loaner.

Mags are PTS EPMs and KWA K120s. Also shown is the replica EOtech that I throw on whatever.

Edit: Bonus pics!. Krytac with Eotech replica and a random green suppressor I found in a drawer and the amplifier thingy from the SRXL.

Edit: I think I like this set up best.

You can get the Pearce finger groove insert that goes under those beautiful blue grips and may be just the compromise you are looking for to get some of the feel of that p238.

I have them on both my 1911s and love them. (And if you prefer, you can use them with the slim g10 vz grips so the gun stays about the same thickness).

https://www.amazon.com/Pearce-Grips-Rubber-Government-Equivalents/dp/B0002INNYU

Buy the UTG Pro flip ups.

Front

Rear

Springfield uses them on their Saint rifles. I got myself a rear sight to play around with and keep as a backup part, and I'm pretty happy with it. Nice thing about it is that you can flip it down w/ the aperture in either the regular or close setting which is something my Troy flip ups can't do.

I gambled on cheaper no-name brand pieces and definitely didn't get my money's worth out of them. The Ozark, Dagger, and Chaos sights all appear to be the same and likely all come from the same factory in China. They look like decent options, but I'd take the UTG over them if only for the looks. UTG definitely has shit products out there, but I think the new flip up sights can hang out with their other PRO stuff like handguards as not shit-tier.

Pinky extension is a life changer, took me about 15 minutes to sand it to fit.

Pearce XD Series Grip Extension only $10 each, worth it in my opinion and doesn't change how it carries at all.

Okay, so your adapter there will give you a picatinny mount on your glock, but it'll be under the frame, in front of the grip. It's a mount you'd use to do this sort of thing. You need to do this sort of thing.

The problem is that gen 1 and gen 2 Glocks don't have the frame rail that the product I linked there mounts on. You could buy both your weaver rail adapter and my top rail thing, but that would be really silly, really heavy, and it wouldn't hold zero very well at all.

I would encourage you to abandon this effort. The red dot you have there could provide just as much fun if you attached it to a .22 pistol or rifle with a rail already in place, and the work to mount it where it needs to go on the Glock would cost much more than the sight itself.

Safety glasses should be strong enough. Check if there are any markings that say "ANSI rated". If you have a paintball mask that will definitely work though, and I would go with that. If you get shot in the tooth there is a good chance that it will crack/be damaged. Not something you want to mess with.

Red dots/ACOG/magnifying sights are plenty useful. You can get a pretty decent NCStar sight for $25. There is also one for $10 if you want a better primary or sidearm, or something else. For a pseudo-ACOG this will work. For a holo (I prefer these over red dots as they give a better sight picture and reticle) this should be fine.

What kind of gun do you like? M4, AK, G36C, MP5, etc.

What kind of pistol? 1911, Glock, M9, p226, etc.

Is that Canadian dollars or USD?

Edit: Problem with Canadian airsoft is that everything is 2-3 times more expensive. So if you can, buy from a U.S. retailer and go for the "Canadian legal" option, and they should adjust it for you, albeit at an extra fee. But $30 is nothing compared to the $200 it might cost to get the same gun in canada.

Edit 2: I'm retarded and can't Canadian airsoft. Evike offers this service for $8, which should make the trip over the border easy. The only other additional fee would be buying an upgraded spring, but that's extremely cheap.

I am sure you, like most of us, have a more mechanically inclined friend who is also into firearms. I understand your trepidation making modifications. You can get a part which attaches to the barrel band on the front end so you don't have to drill there. Here is a kit.

Keep watching gunbot for .22LR ammo. It comes up from time to time. You have to jump on it when you see it for reasonable prices. ($0.30 or more per round is certainly not reasonable!) I would seriously consider placing an order with CMP and being happy when it arrived 6-12 months later since their prices are reasonable if you don't have anything other than that one brick.

The TSA annoys me even more than various States carry issues and restrictions! On top of that I actually like driving. I have traveled as far as a 9 hour drive to an Appleseed but going west which would be about the drive time to Connecticut. One of these days I will make it up that way.

Put this sightmark on my rem870 a few years back. Hundreds of slugs and 00 buck Holds zero and is still going strong. Good value for the price

https://www.amazon.ca/gp/aw/d/B004TDIDW6/ref=mp_s_a_1_1?ie=UTF8&qid=1522617242&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=sightmark+ultra+shot+sight&dpPl=1&dpID=41hIk7GLyUL&ref=plSrch

My dad picked one up last year and he really likes it. I think his favorite mod I purchased for him last Christmas was rubber finger grooves like in the link below (that's the exact model for the SR1911).

http://www.amazon.com/gp/product/B0002INNYU/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

A budget of $50 won't give you much to work with unless you're talking bargain basement.

Like this: https://www.amazon.com/dp/B001JJCHWK/



I am running a Primary Arms red dot and a UTG 3x flip up magnifier. Very happy with both.


https://www.primaryarms.com/primary-arms-microdot-with-removable-base-gen-2


https://www.amazon.com/dp/B00S2FWRGK/

Damn that's a lot of 22s! I really enjoy the 795. I used the iron sights for 2 months or so, but got tired of them. I bought a Barska 3-9x Plinker scope, and it's pretty great, though a little blurry at the higher powers.

I use a ssar-22 AR spec conversion. I am overall happy with it, though I think it adds a bit of weight.

I have been using this super cheap reflex sight for awhile now. I sighted it in once and have fired several hundred rounds with it staying true. If that cheapee can stay true, I guessing anything can stand a chance against a .22

Where are you using it and what are you aiming it at? If the answer is "at home" and "inanimate objects", the best way to attach a laser aim point is to convert one of the existing Rival rails on your Zeus to picatinny, and acquire a cheap picatinny-mounted laser.

If the answer was "people" though, you don't want a laser at all, you want some manner of reflex sight (which will generally also require some sort of picatinny rail adapter to mount to Rival rails) - unlike lasers, which interact poorly with those orbs we have in our skulls that let us see stuff, the aim point generated by a reflex sight is projected onto a lens that only makes it look like it's being superimposed onto whatever it is that you're aiming it at.

Sorry to break it to you, but there is a lot more competition in the sup $200 micro red dot market.

• TRS-25
  
  
• Hi Lux
  
• Holosun
  
• Primary Arms - Advances
  
• Primary Arms
  
• Vortex SPARC II
  
  They are all more or less excellent. I prefer the Vortex because it has an unbeatable warranty.
  
  

I carry the same thing in a 9mm. love it. I would recomend buying pearce grips for the 13rd magazines though. Allows your pinky to add support with the shorter magazine.

http://www.amazon.com/Pearce-Springfield-Armory-XD-Extension/dp/B000J4JI14

Remember that cheap scopes are gamble as there is little to now QA.

I got this one which is pretty good on top of my 10/22

https://www.amazon.ca/Barska-AC10380-Plinker-22-3-9x32-Riflescope/dp/B001JJCHWK/ref=sr_1_9?s=sports&ie=UTF8&qid=1458742305&sr=1-9&keywords=barska

well one of the first things i did was put a a pearce grip extension on it. my hand does hang off a bit on the bottom of my palm with the 13 rounder but with the 16 i can get a very good grip.

The red dot? Trijicon RMR is the name if thats what you mean, it's known as the best which explains the price tag. There are plenty of other brands out there that are still good but around the $200 range, like the Vortex Venom for example.

It's small, but I don't think it'd be the best thing to put on a pistol. This or something similar is what I would go with.

I got the Amega mini scout mount and absolutely love it. Works with irons and doesn't look bad either. I've been wanting to get a holosun ever since I shot the one my friend has. Between the auto-on feature and the solar cell, he hasn't needed to change the batteries. I just love the idea of a red dot you don't need to think about.

I personally wouldn't put a scope on it, but if you do, consider a scout mount since the brass this thing chucks out could scratch your scope (from what I hear). Just test a few rounds with a receiver-mounted scope, and if you notice a color or lines left on the scope after a few rounds consider other options.

Other than the name brand I do not see why these should cost more than $60.

I would recommend UTG's spring loaded set for $60

https://www.opticsplanet.com/leapers-utg-accu-sync-spring-loaded-flip-up-rear-sight.

htmlhttps://www.opticsplanet.com/leapers-utg-accu-sync-spring-loaded-flip-up-front-sight.html

Or their non spring loaded set for $45

https://www.amazon.com/dp/B0182VADPU/ref=cm_sw_r_tw_dp_U_x_CzAACb7Y6DBFF

https://www.amazon.com/dp/B0182UM8ZO/ref=cm_sw_r_tw_dp_U_x_pzAACbH7QCX82

I can personally vouch for these, accurate right out of the box, zero issues, made of the same grade of aluminum.


I've also purchased their non spring loaded 45 degree offset iron sights which go for $60 combined
https://www.amazon.com/dp/B07DD2S86K/ref=cm_sw_r_tw_dp_U_x_OXCACbH7F5WQA
https://www.amazon.com/dp/B07DD2RCT9/ref=cm_sw_r_tw_dp_U_x_PXCACbGFR761A


The best part about these is that the front sight's elevation adjustments are tool-less.

http://www.amazon.com/HiViz-Ruger-GP100-Handgun-Sight/dp/B000EBUG4K/ref=sr_1_1?ie=UTF8&qid=1369928903&sr=8-1&keywords=gp100+front+sight

Pretty sure this is what overthetable was referring to. I might be ordering one soon as well. I've taken off my front sight to paint it and its simple to do. YouTube has plenty of videos on it.

I use one of these in my Tundra, I'm sure it'd work in the Runner as well. Easy to mount and holds a full size 1911 very securely.
[magnet holster](Magnetic Gun Mount & Holster For Vehicle And Home - HQ Rubber Coated 35 Lbs Rated - Firearm Accessory. Concealed Holder For Handgun, Rifle, Shotgun, Pistol, Revolver, Truck, Car, Wall, Vault, Desk... https://www.amazon.com/dp/B01LXCJHKG/ref=cm_sw_r_cp_api_3q3NybMMQH1K1)

Free shipping is always good.

MBUS front and rear set here

MBUS Pro front and rear set here

Using a subsonic round might help? Action cycling slower less velocity for the brass to eject. a product similar to https://www.amazon.com/Caldwell-122231-Brass-Catcher/dp/B004SKCUME might help as well.

https://www.amazon.com/gp/aw/d/B00U2KMVCI/ref=mp_s_a_1_1?ie=UTF8&qid=1498586118&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=holosun+403c

Ask & you shall receive! I love mine!!!

There are better ones, but this is cheap and pretty much universal

You can get a Vortex Micro Dot on amazon for like $130, good enough to run and you'll have money left over for a trigger

Thanks, It's a bit of a combination of 3 things, https://www.amazon.ca/BUSHNELL-14612-Uncle-Detach-1-Inch/dp/B000H6NJ7I/ref=sr_1_1?ie=UTF8&qid=1474408207&sr=8-1&keywords=uncle+mike+10%2F22


[to fit the m1 garand sling] (https://www.amazon.ca/Uncle-Mikes-Sling-Swivel-1-25-in/dp/B01JCSQ5FY/ref=sr_1_3?ie=UTF8&qid=1474408305&sr=8-3&keywords=uncle+mike+1.25%22)

and the bipod adapter from this

I use this cheap scope on my Ruger 10/22 and this red dot on my Marlin. They're both dirt cheap, and rock solid for me. I wouldn't trust them on anything more powerful than a .22 though. My buddy loved the red dot so much he bought one to put on his M&P15-22.

If you want to the Eotech look get the Holosun 510C. I adore mine and it's very solid. If you can wait, keep an eye on /r/gundeals as it goes on sale for ~$260 semi-frequently.

Could you link one of those that you are looking at? I think the ones you're looking at are of the same design of the one I own and I thought the same thing you did before buying it. I have a Caldwell and it uses a pretty heavy velcro srap that goes around the handguard then has a heavy wire frame that holds the mesh over your ejection port. it doesn't actually come in contact with either the shell deflector or dust cover, it just looks like it does.

Get these for a good front sight replacement. Highly recommend them.

Holosun micro red dots are very lightweight and have battery lives approaching aim points. Almost all are sub-$200 and some models have solar panels that will work in daylight even without a battery. My brother has been using one on an AR for two or three years with no issues.

https://www.amazon.com/gp/aw/d/B00U2KMVCI/ref=mp_s_a_1_9?ie=UTF8&qid=1494254922&sr=8-9&pi=AC_SX236_SY340_QL65&keywords=HOLOSUN&dpPl=1&dpID=41Vd0EzK5ZL&ref=plSrch


I've also heard that the new sig microdots are also a great value at $160: https://www.amazon.com/gp/aw/d/B01C95I8N4/ref=mp_s_a_1_10?ie=UTF8&qid=1494254922&sr=8-10&pi=AC_SX236_SY340_QL65&keywords=HOLOSUN&dpPl=1&dpID=318JNJ36k8L&ref=plSrch

https://www.amazon.com/dp/B007FTARKM/ref=cm_sw_r_cp_awd_tEYDwbWSANXMD was referred this by a friend who has a cyma ebr. Works like a champ. Gonna order myself one.

https://www.amazon.com/gp/aw/d/B007FTARKM/ref=yo_ii_img?ie=UTF8&psc=1

The straps are a little long but not bad. Also it's adjustable but by that it means there's a roll of foam in it that you cut off a little at a time until it's where you want it. It's got a nice little pouch which I'll end up putting a dope card in and it's also got a shell holder. Both held on with Velcro.

And for $16 it's solid

Size limit?

For my carbine build I have the Vortex Optics SPR-1303, a 3x sight that's awesome. Runs about $300. https://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM/ref=cm_rdp_product

For my rifle build I have the Nikon P-223 for $165. https://www.amazon.com/gp/product/B006YVT0R8/ref=od_aui_detailpages01?ie=UTF8&psc=1

Not sure how you feel about optics/what company you typically use. I'm a pretty big Vortex and Leupold guy on my big game rifles. However, I felt weird spending too much on a scope for a .22.

I ended up going with this one. Had it 4 seasons now and have brought it into some really rugged country hunting Dusky Grouse. I've dropped it, gotten it wet, basically just abused it as much as possible and it's held up. Awesome value for $50.

This works like a charm for me:
https://www.amazon.com/dp/B00A36MKUO/ref=cm_sw_r_cp_api_i_Xac7CbJF5XC1H

Vortex Crossfire with its included riser. I specifically chose this riser because it allows you to perfectly see the scorpion's iron sights through its frame.
https://www.amazon.com/Vortex-Optics-Crossfire-Red-Sight/dp/B079BY7QMC/ref=mp_s_a_1_6?adgrpid=55820288797&gclid=Cj0KCQjwrJ7nBRD5ARIsAATMxsux4hrJ9QDABMDT6BTIXU89RvQ68Y1clJ0tASybSTGOOZ7VSJ-OVzcaAppCEALw_wcB&hvadid=274745516593&hvdev=m&hvlocphy=9007772&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=13455570092451339803&hvtargid=kwd-299606786369&hydadcr=9873_9624902&keywords=vortex+crossfire+ii&qid=1558726559&s=gateway&sr=8-6

I'm also genuinely curious about the differences between the pricier backup sights (Magpul, Troy Industires, Diamondhead, etc.) and the lower-priced options available on Amazon, since the latter cost around half as much as former. I'll be running a Vortex StrikeFire II on my AR, and I currently have the UTG Low Profile Flip-Up Front and Rear sights (which were gifted to me, and seem to have decent reviews). I'd imagine there's a difference in fit and finish/build quality between the two price points, but are budget backup sights an acceptable option if they're actually just being used as backups?

An easier solution is to just attach some sort of brass catcher.

This is a cheap example, though somewhat bulky.

There's a few options. If you want something that will keep your gun in factory condition, you can get a picatinny rail mount. You could also get a dovetail mount that would take the place of your rear sights like this. However, my recommendation would be to send your slide to the folks at Jagerwerks, or somewhere similar, and have your slide milled for the red dot you want. I personally recommend the milling route if it's in your budget. And, if you can't afford couple hundo for JW, IMO you can't afford a red dot. The difference between a custom milled slide with Trijicon RMR vs. a dovetail mounted lower end red dot is palpable.

Yeah, he should upgrade to trtiitum sights or possibly an RMR they are getting popular these days.

Mine is rocking one of these. I'm very happy with it.

Doesn't look like anyone has answered you yet... I use these - https://www.amazon.com/dp/B01LXCJHKG/ref=cm_sw_r_sms_apa_p4c6yb1PJJ2M8

Sorry for the ugly link. I'm on mobile. Here's one of my favorite locations http://m.imgur.com/a/dZBSv.

Used on that Glock 17 and a Beretta 92fs for a year or so with no issue. If you use two mounted vertically on a shim to extend past the handguard, you can hang an AR with a loaded 30rd just by the barrel. I love these things.

HKS Speedloaders; http://www.midwayusa.com/product/757555/hks-revolver-speedloader-ruger-gp100-s-and-w-581-681-586-686-38-special-357-magnum

Pouch for the aforementioned; http://www.amazon.com/Double-Pocket-Speed-Loader-Pouch/dp/B0013KYB4C

Bianchi holster; http://www.amazon.com/AccuMold-Cruiser-Holster-Barrel-Revolver/dp/B0028M995K/ref=sr_1_2?ie=UTF8&qid=1331702358&sr=8-2

Fiber optic front sight; http://www.amazon.com/HiViz-Ruger-GP100-Handgun-Sight/dp/B000EBUG4K

That's more or less our setup. Great shooter.

Rosewoods came with it, and then I added Pearce Grips under them. Amazing upgrade for $12.

I bought and mounted this Keeper magnet in my center console safe and it seems really solid. Inside the rubber is a series of rare earth magnets.

So you think getting a bottom rail to top rail adapter is better in that case?

Example of what I'm talking about

Are these that good and worth it?
I have a spitfire 3x sitting around but doesn't get as much use beacuse it's on the blurry side up close:
https://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM/ref=sr_1_fkmr1_1?ie=UTF8&qid=1472921466&sr=8-1-fkmr1&keywords=vortex+prism+4x

Is it worth selling that and picking this up?

This one is my favorite. It takes a good pull to get your gun off of it, if it gets knocked or moved around nothing is coming lose. Its rubberized and no exposed metal and the screws come with it and they're recessed so they don't scrape the gun. There's also the "Ironmount" which I've seen some people on /k/ recommend but I own that one as well and in my experience it takes less strength to remove your gun from it.

This will work on the star with a little trimming if you want to make it a little more comfortable.

I have both of these on my Savage..

http://www.amazon.com/gp/product/B001JJCHWK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B001WJ59BI/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1

Very pleased with the scope for $40..

It's a 3-9x32... not sure of the exact model number. Here's the link to amazon where I got it. Seems to have gotten good reviews. http://www.amazon.com/Barska-AC10380-BARSKA-Plinker-22-Riflescope/dp/B001JJCHWK/

Based on everything you said here, this covers most of it. An easy reticle for ranging and calculating drop. low enough power for close shooting and you can still mount a RMR on top. I had one on my SBR and just got rid of it for a no magnification because the eye relief isn't enough on my SBR.

I will be getting one for my AR10.

http://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM

I picked up a Barska for about $50 to put on an old marlin .22 and it has really impressed me for the money.

Cheap voodoo tactical I found on amazon I modified to actually work really well!

Voodoo Tactical - Adjustable Rifle Buttstock Cheek Rest - Black Nylon with Ammo Carrier Case https://www.amazon.com/dp/B007FTARKM/ref=cm_sw_r_cp_api_i_GGqUDbJJ0C1TR

Good shit man! Im gonna take it slow with the modding my wallet already hates me . Charging handle and grips look awesome though.


one of these right ? https://www.amazon.com/Holosun-HS510C-Reflex-Circle-Holographic/dp/B01MT5RJLD

I havent ever bought a red dot. Can you clue me in to the advantages/disadvantages to an open red dot like that compared to a circle/standard red dot.

Looks like this red dot. I have one on my 10/22, it's not bad.

Looks like this one on amazon

https://www.amazon.com/gp/aw/d/B007FTARKM/ref=mp_s_a_1_1?ie=UTF8&qid=1522035129&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=rifle%2Bchin%2Brest&dpPl=1&dpID=513D6ikUtiL&ref=plSrch&th=1&psc=1

If you can swing an extra $40, Vortex has the best red dots for the price point. Also a full no bullshit lifetime warranty.

https://gun.deals/product/vortex-strikefire-ii-red-dot-redgreen-dot-wlower-13-co-witness-cantil-14930-wcode-spring15-o?mobile=true

They're usually $179, don't know how long that deal lasts.


If you really can't go over $100, SightMark makes semi decent stuff. Don't go too hard on it though.

Little $40 cheapo: https://www.amazon.com/gp/aw/d/B000W4BQ7K/ref=mp_s_a_1_3?ie=UTF8&qid=1496518870&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=sightmark+red+dot&dpPl=1&dpID=51wta5L7snL&ref=plSrch


Slightly more robust EOtech style, I had one of these. Lasted a couple years of range time then the power button stopped working. https://www.amazon.com/gp/aw/d/B004TDIDW6/ref=mp_s_a_1_2?ie=UTF8&qid=1496518920&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=sightmark+red+dot&dpPl=1&dpID=41uaubKMNvL&ref=plSrch


Definitely get the vortex if you can though

I don’t mean to make light of the costs, truly. I know $819 is a ton of money.

PSA has this:

https://palmettostatearmory.com/psa-16-mid-length-5-56-nato-1-7-nitride-lightweight-m-lok-classic-rifle.html

Plus this:

Magpul Industries USA Mbus Generation Ii Backup Sights Front & Rear Set https://www.amazon.com/dp/B01GDL22O6/ref=cm_sw_r_cp_api_i_M53OCbYHJQX10

You’re complete rifle for $550 plus shipping and a transfer fee.

Or use a red dot for $80 more:

https://palmettostatearmory.com/psa-16-mid-length-5-56-nato-1-7-nitride-lightweight-m-lok-classic-rifle.html

Also, that Ruger or things like it will go on sale at a local gun store.

I use this one and it works just fine. It even works well while its attached and Im walking around the prairie shooting prairie dogs.

I'm planning on picking up a Sightmark Ultra Shot w/digital switch for mine, I've heard a lot of good things about it and you don't need a separate mount.

check out gundeals for a good deal on MBUS or do a holosun

https://www.amazon.com/dp/B01GDL22O6/ref=sspa_dk_detail_2?psc=1

Primary Arms makes a nice little 3x acog type scope on the 2 to 3 hundred range

https://www.primaryarms.com/primary-arms-gen-ii-3x-compact-prism-scope-acss-cqb-m2-5-56-nato-reticle-black

So does vortex for around 350

https://www.amazon.com/Vortex-Optics-Spitfire-Prism-Scope/dp/B00HYRGNLM/ref=mp_s_a_1_1_sspa?adgrpid=51540464570&gclid=Cj0KCQjwrJ7nBRD5ARIsAATMxsu3oChd_0APNmPqdQf4EC4r2z4-UDRDidQMhDImqQ5FSSZjbi5d6zMaAjtLEALw_wcB&hvadid=274687406793&hvdev=m&hvlocphy=9027248&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=14011438296207626877&hvtargid=kwd-302923763716&hydadcr=9877_9890446&keywords=vortex%2Bprism%2B3x&qid=1558703775&s=gateway&sr=8-1-spons&psc=1&th=1

Mine was like $217 after tax, so I thin $220 is a completely reasonable price. Get yo-self some swivel studs and swivels, a cotton GI loop sling, and some tech sights, son!

Burris AR332. It's a prism red dot almost identical to the Vortex Spitfire Prism for a fraction of the price. That being said, I do like the reticle on the Vortex better but for the price I'd go Burris all day.

I got the Sightmark Ultra Shot Sight QD Digital Switch for ~$55 on sale at Amazon around Christmas as an experiment: How "bad" were these sights that people keep telling me not to buy?

I've put about 500 rounds of 5.56 through my Sig516 with it mounted, and had some serious wobbling issues with it yesterday.

HTML5 video of wobbliness (dat gfycat name tho)

Kneeling at 50 yards, I was only able to get 3 of 20 rounds on a 12" target. I attribute those 3 to blind luck. Not good.

Today I took a look at the Sightmark to see if I could keep it limping along. It turns out that there's a way to tighten the mount up to account for this. Huzzah!

You can see an adjustment nut on the bolt they use to index on your rail in this potato pic. This needs to be tightened. I found that this nut is extremely loose, and was able to adjust it with a small punch, as I don't have a small enough wrench. I had some loctite lying around that I added to the nut, in the hopes that this won't happen again.

Is a sight that stops working after 500 rounds a good sight? Probably not. Can you limp by on one for a while? It looks like it.

I'll update after the next 500 rounds.

Sure! Here is a link for MBUS Pro

Magpul MBUS PRO Steel Sight Set MAG275 & MAG276 BLACK https://www.amazon.com/dp/B00CLGLRD0/ref=cm_sw_r_cp_api_s43FybPR012JG

And here is a link to the regular MBUS

Magpul Industries MBUS Generation II Sight Set Front & Rear Color BLACK https://www.amazon.com/dp/B01GDL22O6/ref=cm_sw_r_cp_api_c53FybAB9HG4F

Would using something like this upside down work?
https://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/dp/B004O6CDV0

May be something like this.

https://www.amazon.com/UTG-Profile-Flip-up-Aiming-Aperture/dp/B0182UM8ZO

https://www.amazon.com/UTG-Model-Profile-Flip-up-Handguard/dp/B0182VADPU/ref=pd_bxgy_200_img_2?_encoding=UTF8&psc=1&refRID=CJJTRM5EVSHHW1M9S9HV

These are the ones I have on my AR right now, I like them.

Got the sights on it last weekend and cleaned her all up to be ready for this weekend.


Holosun HS510C 2 MOA Dot Or A 65 MOA Ring Open Reflex Circle Dot Solar Power Holographic Red Dot Sight https://www.amazon.com/dp/B01MT5RJLD/ref=cm_sw_r_cp_api_i_Esx5CbQJ6K3R1

Magpul Industries USA Mbus Generation Ii Backup Sights Front & Rear Set https://www.amazon.com/dp/B01GDL22O6/ref=cm_sw_r_cp_api_i_7tx5CbEBJVZ3G

This is for sale on amazon for $130. I would do $100 shipped? I don’t want the MI mount

crossfire

https://www.amazon.com/HOLOSUN-HS403C-Solar-Power-Micro/dp/B00U2KMVCI/ref=sr_1_1?ie=UTF8&qid=1498136089&sr=8-1&keywords=holosun+solar

$150 for the original

edit: And solar

There aren't any good replica eotechs unfortunately. There's this and this though which are okay. The first one is a bit dim for outdoors use in bright sunlight though.

Just go for a t1 replica.

Ok fam I think I might have your back with a few options.

reflex/ red dot

I have bought a few and all have worked and held zero. That said they are all range guns, so they aren't tossed around or abused.

This one has worked well for a couple of my AR pistols. The other CVLife, and Brownell sights have worked equally well in my experience.

Edit: After a brief look on Amazon, the Fyland, Dagger Defense, and similar ones should all work just the same. They all roll off the same Chinese factory line.

Vortex SPARC AR...it goes on sale at PSA on the reg for $130

https://palmettostatearmory.com/vortex-sparc-ar-1x-red-dot-scope-spc-ar1.html

Primary Arms Advanced Micro Dot $150

http://www.primaryarms.com/primary-arms-micro-dot-with-removable-base-md-rb-ad

Holosun HS403A $170

https://www.amazon.com/HOLOSUN-HS403A-Micro-Red-Sight/dp/B00KOOEZ6W

>generally regarded as trash and so is the vast majority of Amazon optics.

What you buy matters, not from where:

https://www.amazon.com/Primary-Arms-Illuminated-Scope-Black/dp/B00GX66ZDQ

https://www.amazon.com/Vortex-Optics-Spitfire-Prism-Scope/dp/B00HYRGNLM

https://www.amazon.com/Bushnell-Zone-223-Reticle-Riflescope-Turrets/dp/B00ABP5UXG

https://www.amazon.com/Trijicon-Illuminated-Horseshoe-Ballistic-Reticle/dp/B0024MMRH6

Vortex Venom Red Dot Top Load 3 MOA Dot https://www.amazon.com/dp/B00S2P2J90/ref=cm_sw_r_cp_api_OAlfAbAX7GVVT

https://www.amazon.com/HOLOSUN-HS403C-Solar-Power-Micro/dp/B00U2KMVCI

​

​

one thing i recommend is that your but stock is skinny or it messes with the mask and looking down your sights

Its the Leapers Golden Image 30mm Red/Green dot scope. You can pick it up on Amazon for $40 here

Cvlife, was on amazon, here https://www.amazon.com/dp/B00A36MKUO/ref=cm_sw_r_cp_apa_i_ffd1CbJQ3W66Q

$66 on Amazon

Magpul Industries Usa Mbus Generation Ii Backup Sights Front & Rear Set https://www.amazon.com/dp/B01GDL22O6/ref=cm_sw_r_cp_api_jDvRBb0G88K3W

Leapers Red dot - $33 + shipping

655 reviews - 4.3 out of 5 stars... Can't go wrong with it.

Buy this I have one you won't be disappointed especially for the price

https://www.amazon.com/HOLOSUN-HS403C-Solar-Power-Micro/dp/B00U2KMVCI/ref=sr_1_2?s=hunting-fishing&ie=UTF8&qid=1479226315&sr=1-2&keywords=holosun

It is literally one of these:

CVLIFE 1X22X33 Red Green Dot Gun Sight Scope Reflex Sight with 20mm Rail https://www.amazon.com/dp/B00A36MKUO/ref=cm_sw_r_cp_api_i_xIECDb2HG7VK0

This is a good reflex:

https://www.opticsplanet.com/trijicon-3-25-adj-red-rmr-type-2.html

an optic would be good. I bought a Leapers Red Dot sight. For less than $50, it 's pretty good IMO.

It won't give you any magnification but it should be accurate up to 50 yards if you zero it in properly.

Note if you havent done so already: When you attach your mount, make sure you degreased the screws that came with the rails and the holes on the receiver. Then use a hollowground screw to attach them (take it from me, those screws strip very easily) after you put some RED Loctite on the screws.

One of these universals might work. https://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/dp/B004O6CDV0

That way you dont lose your rear sight. These have fallen out of favor, but they do work.

You can absolutely put a sling on it.

https://www.amazon.com/gp/aw/d/B000H6NJ7I/ref=mp_s_a_1_7?ie=UTF8&qid=1475203288&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=sling+mounts&dpPl=1&dpID=41RP16XCdYL&ref=plSrch

Just grab that (or find a kit with 1 1/4" loops) and follow the directions in the package. You'll just need a drill and some epoxy.

Don't worry, you're fine.

Mako Universal Picatinny Rail Mount might handle the RMR, looks like some people have had trouble with it shaking loose under recoil. Bonus: it would probably add enough clearance for the TLR-1HL and Osprey to co-exist.

If you're looking for just something for some range fun this might work. Just don't look at it, it hurts my eyes.

https://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/dp/B004O6CDV0

the only caniks that come optic ready are the sfx and the elite combat, and elite sc. you would have to have the slide milled to accommodate a plate, then could probably use a plate from any of those other 3 models.

edit: you could do something silly, and put one of these Mako Universal Picatinny Rail Mount Fits Most Pistols on

I ordered the Primary Arms Advanced Micro Dot 50K. Haven't received yet but it seems very similar to the Holosun. So similar that I wouldn't be surprised if they use some of the same parts.

https://www.amazon.com/HOLOSUN-HS403A-Micro-Sight-Riser/dp/B00KOOEZ6W

http://www.primaryarms.com/primary-arms-advanced-micro-dot-with-push-buttons-and-up-to-50khour-battery-life/p/md-ads/

I built a couple of AR-15s for my father and little brother. Little bro got me a Chinese red dot for Christmas, and got one for himself. Then my Dad saw it, thought it was cool and bought one for the rifle I built him. Meanwhile I'm screaming internally thinking about putting one of these on my gun, and wishing they'd put the money towards a better budget dot like a PA MD-ADS or a Holosun. Oh well. I've got the lil red dot on my AR pistol build now and I told him I'd beat the hell out of it.

Totally found it. Yep cheap airsoft garbage, probably Google'd "red dot" and bought the cheapest thing possible, ironically made in China.

I kind of want to buy one and see how long it lasts.

http://www.amazon.com/Uncle-Mikes-Detachable-Carbines-Swivels/dp/B000H6NJ7I

look at the fourth image this isn't the same scope but it's similar and should give you an idea what I mean.

Apparently it has really sketchy reviews: http://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/product-reviews/B004O6CDV0/

I wanna see it on a pistol using this.

Under $10

use a brass catcher next time

http://www.amazon.com/Caldwell-122231-Brass-Catcher/dp/B004SKCUME

It's different than a real EOTech.

This is the one I've got http://www.amazon.com/dp/B004TDIDW6

It's a Vodoo Tactical, got it from amazon.ca

Edit: https://www.amazon.ca/Voodoo-Tactical-Padded-Stabilizer-Rifle/dp/B007FTARKM

• Stag Arms Model 4
  
  
• KAC Rifle Length M5 RAS
  
  
• KAC Foregrip
  
  
• Vortex Spitfire 3x scope
  
  ____
  
  Going for an M16A4 clone.

http://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM/ref=sr_1_1?ie=UTF8&qid=1453355505&sr=8-1&keywords=spitfire+optic

Holosun

HOLOSUN HS403A Micro Red Dot Sight (2 MOA) https://www.amazon.com/dp/B00KOOEZ6W/ref=cm_sw_r_cp_api_PsAvzbR1WDXVV

$126 shipped right now

HS403A - $129

Non mobile link = http://www.amazon.com/gp/product/B00KOOEZ6W

$62 is a Prime option

Magpul Industries MBUS Generation II Sight Set Front & Rear Color BLACK https://www.amazon.com/dp/B01GDL22O6/ref=cm_sw_r_cp_api_7WQBzb6X4DS5W

https://smile.amazon.com/Magnetic-Mount-Holster-Vehicle-Home/dp/B01LXCJHKG

Here's what I ended up going with for ~$958 leaving you plenty for a nicer optic:

Stribog SP9A1 $712 shipped

FS1913 Side Folding Brace $188 shipped

SHF Rail/Brace Adapter $58 shipped

Optional trigger shims for AR trigger install also available from Midway, I plan on trying a Geissele.

This is higher than retail homie. You're probably in the $90-$100 range to get any bites for used.

https://www.amazon.com/Vortex-Optics-Crossfire-Red-Sight/dp/B079BY7QMC

this does look pretty sick I may need to acquire this soon - I like that its 3x and that even if the battery goes down you can see the etched reticle

guess my only concern is that BUIS would not work since it is a magnified optic?

https://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM

Oh yea. Check em out. I’m a big fan.
Magnetic Gun Mount & Holster for Vehicle and Home - https://www.amazon.com/dp/B01LXCJHKG/ref=cm_sw_r_cp_api_i_hrmVDbK478MNA

Hard to tell but it could be one of those Sightmarks.

http://www.amazon.com/Sightmark-Ultra-Sight-Digital-Switch/dp/B004TDIDW6

I got one of these off a buddy for free and threw it on my 10/22 before switching it over to a cheap .223 bolt gun. The ammo carrier velcros on. https://www.amazon.com/Voodoo-Tactical-Adjustable-Buttstock-Carrier/dp/B007FTARKM
The actual cheek rest is a piece of dense foam rolled into a cylinder, so it's easy to cut it down to whatever height you need.

I didn't like the front sight on my Ruger GP100 (was flat black), so I replaced it with this:
http://www.amazon.com/gp/product/B000EBUG4K

It came with a couple of different colors, I ended up on green/yellow.

I have this Caldwell brass catcher. I've only used it once and wasn't super happy with it, but I think it's because I just slapped it on without making much of an effort. It holds about 30 casings, but I'd go with the Pic rail one because it has a larger opening

Recently (this Saturday) did some work to convert mine to an LTR. Still waiting on the sling mounts, but here here's mine: http://imgur.com/a/34ePZ

For the curious, here's all of the modifications:

• Tech-SIGHTS TSR200RL
  
• Volquartsen Bolt Release and Target Hammer
  
• Bell and Carlson Extended Magazine Release
  
• CJ Weapons M1 Garand Web Sling
  
• Butler Creek Steel Lips Magazine
  
• Uncle Mike's Quick Detachable Sling Swivels
  
  I can't wait to get out and put some holes in paper with it now. With the new bolt release and target hammer, dry-firing feels so amazing compared to stock parts.

Ok I get that some people like to spend $ on top quality stuff an Aimpoint Pro is pricy... considering the Sport M&P goes for $750-$800 range the damn sight is half the price!! If you are honestly gonna use the rifle to just go to the range and practice or something other than non warfare activities consider a sight more cost efficient... Don't sleep on something like a Sightmark I have it on my M&P 15 OR and its legit! Yes I'll eventually get an EOtech when I have the funds but something expensive as fuck just to start off with if silly IMO... if you want a picture on how my Sightmak looks on my rifle PM me.

Absolutely. Comes with a few replacement pipes in different colors too. It's a piece of cake to put on. There is a small plunger on the muzzle beneath the front sight. Hit that with a punch and it pops right off, new one slides right in. Takes less than 30 seconds.

No plans to replace the rear, I dig the adjustable sight.

Holosun Red Dots are supposed to be the nuts, it's what I'm going to get as an alternative to my visionking scope. Smack bang in the middle of your price range at $162.00, classic AR15 style aimpoint clone:

https://www.amazon.com/HOLOSUN-HS403A-Micro-Red-Sight/dp/B00KOOEZ6W

Loads of people are using them on RS as a budget aimpoint alternative.

Here's my setup. Love it all. Sorry for the lack of formatting, I'm on my phone.

NCStar 3-9x 40mm scope
http://www.amazon.com/gp/aw/d/B000FHBQWO/ref=redir_mdp_mobile

Uncle Mike's swivel
http://www.amazon.com/gp/aw/d/B000H6NJ7I/ref=mp_s_a_1_4?qid=1368464932&sr=8-4&pi=SL75

Eagle 30rd banana mag
http://www.slickguns.com/product/ruger-1022-22lr-30rd-banana-mag-new-eagle-799

Forgot what kind of sling I got. It's nothing fancy. The eagle magazine had some weird plastic bit on it to "assist" is removing the mag but it prevented it from fitting. One swift hit with a large rock took it right off though.

Also avoid Remington golden bullets. I say it all the time but they are crap. I had jams every 5-10 rounds. I'm currently using federal's bulk ammo and haven't had a single bad round.

https://www.bearcreekarsenal.com/upper-assemblies?price=100-200&spec_length=289&spec_platform=442

Bear Creek has complete uppers (inc bcg/ch) for under $200.

https://palmettostatearmory.com/psa-ar15-complete-classic-stealth-lower.html

Complete lowers (PSA) can be had for $119.00 up.

https://www.amazon.com/Magpul-Industries-Generation-Backup-Sights/dp/B01GDL22O6/ref=sr_1_4?crid=1USH4X8M6HUX3&dchild=1&keywords=magpul+buis+sights&qid=1574624940&sprefix=magpul+buis%2Caps%2C146&sr=8-4

Magpul BUIS for $80.00

Also, factor in shipping and the FFL transfer fee.

I pulled the trigger. I've been watching prices on ebay and amazon and this look like a sick deal.

https://camelcamelcamel.com/Magpul-Industries-Generation-Backup-Sights/product/B01GDL22O6

This is the wrong game to start crying "It's not realistic" with. Don't get me started on the ballistics or weapon handling of the game let alone a camera that can not only see shoeprints but also track them and tell you who is wearing what shoes. Or the fact that you can pull 2 variable size steel reinforcements in your back pocket along with infinite wooden barricades. But I suppose that is more realistic than a solar powered sight.


Right now glaz is broken, either you remove his thermal sight and go back or you find a way to make it play better with the rest of the game. How about you make Smoke's smoke block his thermal sight. Or have it run out of battery, or like OP is suggesting have it solar powered.

Have you looked at UTG PRO front rear sights?

UTG Model 4 Low Profile Flip-up Front Sight for Handguard

UTG Low Profile Flip-up Rear Sight with Dual Aiming Aperture

I believe they are these. I have then on both my 1911s. http://www.amazon.com/Pearce-Grips-Government-Rubber-Finger/dp/B0002INNYU

This picture is a bad representation. There is a small rubber panel under whatever grip you have with the finger grooves in the front.

ok.. so leveling make sense.

and i think i understand zeroing..at least the theory of it.

i figured out the zoom but I'm having trouble with focusing. Turing what I think is the focus ring doesnt seem to do anything

here is a link to the scope
http://www.amazon.com/gp/product/B001JJCHWK/ref=oh_details_o01_s00_i00

I got this puppy a while back to try out for my AR.

Threw it on my airsoft rfile and it works like a dream. Took a BB to the glass first time out and cracked but it still holds a zero no problem.

Here's the PSA kit I got. http://palmettostatearmory.com/psa-16-chf-mid-length-5-56-nato-1-7-ultra-light-moe-defender-rifle-kit.html
Stripped PSA blem lower.

Fired it for the first time this weekend and didn't have any problems.

Looking for a decent scope for under 400. Thinking about asking Santa for http://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM.

No Glock to post, sorry guys.