Reddit mentions: The best pliers

Get a pi 3, because integrated wifi + bluetooth.

I would suggest that you buy a good quality power supply (Canakit is good, else the official rpi one). Just don't use chinese crap or a phone charger.

Also, get a good SD card. I strongly suggest a Samsung Evo+ 16GB bought from a reputable seller.

A breakout board of this type can be useful (albeit not essential at all)
https://www.adafruit.com/product/914

I personally bought a kit from Canakit including the previously mentionned stuff. It's a good kit, but not necessarily a great value. The SD card they include is good but not great, and I didn't like the case.

Then for everything electronics, Aliexpress and Ebay are your new best friends. You'll find the same stuff on Amazon, but you'll end up paying 2-3x the price. I cannot suggest a kit of electronic components, because it is a bit ridiculous to just buy 30 resistors. Get 600 of them for 5$ instead.

Edit: here is a copy of a previous answer I've given to a similar question.

Basic Power supply. You probably already have a 5v wall wart, check if it can supply 2.5A. If it came with a product you bought, it's decent quality. If you need to buy one, get it from Element 14 or an other reputable store. You can find cheaper ones, but I strongly advise against getting a random Chinese psu. Doing so would be asking for trouble.

Numerical signal doesn't require high quality cables. This would will do just fine. 3.72 CAD http://www.ebay.ca/itm/6FT-HDMI-1-4-3D-Cable-HDTV-High-Speed-Ethernet-ps3-bluray-1080p-FREE-SHIPPING-/131144973049?hash=item1e88d97af9:g:2gcAAOxyJX1TAj3K

I don't think this is essential at all, but the kit you linked contained one. I bought this one and I'm happy with it. If you want to save some money, I would skip this guy.
$4.10 http://www.aliexpress.com/item/Raspberry-Pi-model-B-plus-T-cobbler-expansion-DIY-kit-GPIO-cable-breadboard-GPIO-T-adapter/2046473508.html

$2.04 830 points decent cheapo breadboard. Maybe get more than one. http://www.ebay.ca/itm/181227589427?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Aligator clips. I think 50cm is too long, maybe get 2 sets and shorten the cables of one.
$1.55 http://www.aliexpress.com/item/1set-10pcs-Alligator-Clips-Electrical-DIY-Test-Leads-Alligator-Double-ended-Crocodile-Clips-Roach-Clip-Test/32580823346.html?spm=2114.01010208.3.11.Q66gPn&ws_ab_test=searchweb201556_0,searchweb201602_2_10017_10005_10006_10034_10021_507_10022_10020_10018_10019,searchweb201603_6&btsid=9259cb1d-c2e2-42ff-a599-3f468f6ecc6e

The kit you linked contains 5 resistors. That is a joke. Get this assortment and have fun sorting them.
$2.68 http://www.aliexpress.com/item/30-Kinds-1-4w-Resistance-1-Accuracy-Metal-Film-Resistor-Bag-600pcs-in-1-Set-Passive/1752861568.html

$1.10 http://www.aliexpress.com/item/100PC-Lot-3MM-5MM-Led-Kit-Mixed-Color-Red-Green-Yellow-Blue-White-Light-Emitting-Diode/32376627762.html You can also get RGB if you want, but they are a bit more expansive. LEDS sure are fun to play around with.

Jumpers. Essential to connect stuff to the pi. $2.84 http://www.aliexpress.com/item/Dupont-line-120pcs-20cm-male-to-male-male-to-female-and-female-to-female-jumper-wire/1490773403.html
More jumpers. Those are for connecting stuff on a breadboard. I don't really like those as your board will get messy quickly, but at least this kit contains shorter jumpers than the previous one, so it's a nice addition. I would suggest you get 6 colors x 25m of 22 AWG SOLID CORE wire. You can cut it to length and make your own jumpers. I got a kit from Elenco for about 20$ on Amazon. If you want to do some breadboarding, I consider than as an essential. $1.38 http://www.aliexpress.com/item/Hot-Sale-65pcs-lot-Jump-Wire-Cable-Male-to-Male-Flexible-Jumper-Wires-for-Arduino-Breadboard/32437796067.html?spm=2114.01010208.3.10.PzcAVY&ws_ab_test=searchweb201556_0,searchweb201602_2_10017_10005_10006_10034_10021_507_10022_10020_10018_10019,searchweb201603_6&btsid=ad849cd3-deff-4e0b-92ae-e3d15373fd4a

Cheapo potentiometer kit. $3.30 http://www.aliexpress.com/item/Free-Shipping-10pcs-Linear-Potentiometer-1K-Ohm-5K-Ohm-20K-Ohm-100K-Ohm-220K-Ohm-Assortment/533133005.html
Those with 4 leads are a pain in the breadboard. They keep jumping out and stuff. Plus you won't find any use for the extra pair of leads.

$1.99 http://www.aliexpress.com/item/Free-Shipping-100PCS-2-pins-6-6-5-mm-Switch-Tactile-Push-Button-Switches-6x6x5mm/1523104421.html

Not essential, but cheap and fun!
$0.99 http://www.aliexpress.com/item/5PCS-LOT-0-56-inch-1-Bit-7-Segment-Red-LED-Display-Digital-Tube-Plastic-Metal/32335395078.html

You will need those sooner than you think to make a a circuit you'll find on instructables. For one pezo, you can't go wrong.
$0.95 http://www.aliexpress.com/item/Free-Shipping-20PCS-LOT-New-NE555-NE555P-NE555N-555-Timers-DIP-8-TEXAS/32328453891.html

Because you won't do breadboarding with your pi all the time. Get a battery connector (next item) to power the board. I suggest you bookmark this shop! Robotdyn is the BEST SHOP on Aliexpress by far. Few items, but very high quality (like, amazing quality and the best packaging I've seen so far). Why not get an arduino nano or uno for a few dollars? Sometimes an arduino is better suited for a project, and they are so cheap.
$1.19 http://www.aliexpress.com/item/Breadboard-Power-Supply-5V-3-3V-1A/32581547480.html

$0.51 http://www.aliexpress.com/item/Free-Shipping-2pcs-90-DC-9V-Battery-button-power-plug-for-Arduino-Mega-2560-1280-UNO/32236294183.html?spm=2114.01010208.3.2.vdMJ0V&ws_ab_test=searchweb201556_0,searchweb201602_2_10017_10005_10006_10034_10021_507_10022_10020_10018_10019,searchweb201603_6&btsid=5c916f06-2c87-48bf-9075-e191078d3d89

Cheap cutters, but they cut very well! The only cutters you'll need for a while. $2.14 Wire cutters http://www.ebay.ca/itm/322001218703?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
You'll also need some long nose pliers. Again, no need to get anything fancy.

But if you want to make a gift to yourself, I am absolutely in love with those pliers (make in Italy) http://www.amazon.com/Hakko-PN-2007-Long-Nose-Outside-Serrated/dp/B00FZPHEW2/ref=sr_1_1?s=pc&ie=UTF8&qid=1460924870&sr=8-1&keywords=hakko+pliers

I don't consider a case as an essential. But I love cases. And this one is one of my favorites. It's compatible with the pi3 and because it allows a good airflow, you won't need to add a fan. Just get a "heatsink for rpi" (1$ on Aliexpress) if it doesn't come with your pi.
$3.15 http://www.aliexpress.com/item/Raspberry-Pi-2-model-B-Acrylic-Clear-Case-with-logo-Compatible-with-Raspberry-Pi-B-plus/32334774743.html

Nice and cheap kit, but by no mean essential for a beginner.
$3.84 http://www.aliexpress.com/item/100pcs-set-RM065-Trimming-Potentiometer-Variable-Resistors-Assorted-Kit-10-Values-Each-10pcs/32596638037.html

If you get in the hobby of electronics, you'll need some caps. This kit has most values you'll ever need.
$6.50 http://www.ebay.ca/itm/15-value-120pcs-50V-Electrolytic-Capacitor-Assortment-Kit-Set-/131155968234?hash=item1e898140ea:g:w0QAAOxykmZTOlin

Finally, I strongly suggest you get a multimeter. Either get the cheapest one you can find like this one : http://www.amazon.com/General-Hand-held-Multimeter-Transistor-Function/dp/B00066ZZO4/ref=sr_1_6?ie=UTF8&qid=1460925081&sr=8-6&keywords=multimeter (it will do everything you need just fine) or get a Unity UT-61E for about $50. The absolute best meter for the electronic hobbyist, but by no mean required for a beginner. Just don't go in the middle. Don't.

Here are some links. Most of these are things that if someone had, they wouldn't mind having doubles or whatever. Most of them I own or have used and liked. Many of them can be found at big box stores but all of these should contain brand and picture..

Like, the utility knife is a particular one that is really nice, both brand and style. Super handy for cutting thick insulation.

http://www.amazon.com/DEWALT-DWHT10045-Single-Blade-Snap-Off/dp/B0051QIA3C

Can't go wrong with knipex cutters. Anything knipex is pretty good. Without knowing more details on what they are into, this is a decent all rounder.

http://www.amazon.com/gp/aw/d/B000X4MPAQ/ref=mp_s_a_1_2?qid=1418895942&sr=8-2&dpPl=1&dpID=31TAs95wNXL&ref=plSrch&pi=AC_SX200_QL40

Things always need oiling. Hinges and ball bearings and stuff.

http://www.amazon.com/gp/product/B000KKHNU0
(Plus)
http://www.amazon.com/Liquid-Kroil-Penetrating-Lube-Aerosol/dp/B00EINDJSU/

One screwdriver that serves many functions in one small, cheap package:

http://www.lowes.com/pd_170991-86580-SF14_4294857608__?productId=1221941

A tape measure that has the decimal / fractional written on it. I can read a normal one, but I find work with my Lufkin more accurate and less transposed bits.

http://www.amazon.com/Lufkin-QRL625MP-Vertical-1-Inch-25-Feet/dp/B004R1JPEA/

Ball end metric allen wrenches with screwdriver handles. They make many sets ( standard, etc)

http://www.amazon.com/Bondhus-10687-Balldriver-Screwdrivers-ProGuard/dp/B0006O4ADI

These clamps are decent and cheap for both woodworking and metalworking. Irwin is a nice namebrand but it's a lot more money for just a clamp.

http://www.harborfreight.com/hand-tools/clamps/11-inch-swivel-pad-lock-grip-pliers-39535.html

Metalworking with flat stock.. you often have some holes that need to be drilled from a template to a thing. These center in the hole and transfer the marks. (Using the clamp helps too)
http://www.harborfreight.com/28-piece-transfer-punch-set-3577.html

Good quality headlamp with a red mode. I like the red mode for outdoorsy things. Non red mode lamp people are jerks when they turn and talk at you and blow your night vision.
http://www.rei.com/product/866955/petzl-tactikka-plus-headlamp

These might be some more "advanced items" but I have found them all to be of extreme usefulness and not too expensive to justify. Note: Where provided Amazon links are for reference only and I have no financial interest in the sale of the item listed.

- A set of ball-tipped metric hex key wrenches. The ball end allows you to get around obstacles and still rotate the fastener. https://www.amazon.com/Bondhus-10946-Balldriver-L-wrenches-1-5-5mm/dp/B0006O4AEC Note: You'll only need, IIRC, three sizes but the set is still cheaper than buying the individual keys.

- A clean popsicle stick works great to "scrape" or swipe the occasional pre-print and post-print drip from a hot nozzle's orifice and cannot damage the metal. Actually a suggested tool by a lot of industrial hot melt adhesive system companies for the reasons I just stated.

- A small open topped container, about the size of a kids sand pail, for all the waste support, brim, raft and skirt material you'll be generating. I happened to have a clean empty plastic 1 gallon OJ jug and cut off the top where the jug started to narrow leaving me a 8" tall "bucket". Small enough to keep next to the machine because tiny bits of PLA...

- A small magnifying glass, good for layer quality inspections.

- A small AA powered penlight, I had one anyway on hand anyway but was surprised at how often I needed it around the printer that it now lives there full time.

- A plastic paint scraper since I do lots of technical prints that leave large amounts of random first layer support spaghetti stuck all over the build plate. https://www.amazon.com/Red-Devil-4718-3-Piece-Plastic/dp/B001SBJIA8 (I know for a fact this set I've linked to is soft enough not to scratch the PEI coating. You actually only want the smallest scraper in the set, the other two can be used for what ever but at $2.99 per set even if you never need the larger ones it's no big loss.)

- A small table-top digital humidity and temperature gauge to monitor your printer's local "micro-climate". At the beginning I found that there was some temp/humidity related print quality issues where I had first set up my printer that forced me to relocate it and the only way I figured that out was by using this gauge. https://www.amazon.com/gp/product/B0013BKDO8/

- Good quality needle nose pliers with some grip to them. The pliers Prusa included with the printer are, IMNSHO, junk. I have both of these and am satisfied with both:

Good: https://www.amazon.com/Xcelite-378M-Profile-Electronic-Serrated/dp/B004UNFK58

Better (and cheaper): https://www.amazon.com/gp/product/B00FZPHEW2/

GearWrench 35pc micro driver set I have one of these and it comes in handy all the time. I'm a professional mechanic and this kit always comes with me on service calls.

or

Wera Tool-Check Plus Bit Ratchet Set with Sockets - Imperial Basically a fancier more indepth version of the GearWrench set. I don't own one, but its on my list and would likely replace the GW set at work. I'd bring the GW set home.

or

Knipex Alligator Plier Set What can be said, Knipex makes the best pliers. You can grab hex heads, turn pipe as it grips like a mother, and any other thing your sweet little heart desires.

or

If you want to save up a little more cash, these Knipex Plier Wrenches are awesome or so I've heard Also on my list of stuff to get. These play a similar role as adjustable wrenches.

Knipex for Lineman's pliers: (with or without crimper). Their grip and cutting edge are significantly better than any other brand I've tried.

Wera for screwdrivers: I recommend the XXL 3 set. For sale here.

I still like Klein for strippers. I use the Kurve everyday and the Katapult for wire with thick insulation like PV wire.

Fluke for your meter. Most people recommend the T5 for basic stuff, but the 323 has a proper clamp and removable leads for the same price.

Knipex Cobras for your channel lock style pliers. These are absurdly good and have saved my ass a couple times.

I also recommend buying a Knipex Pliers Wrench. I own a 7-inch and a 10-inch pair and they're way better than a traditional adjustable wrench.

Stanley newest Leverlock tape measures are just as good as Milwaukee's tape and less bulky for half the price.

Milwaukee's Fastback series are the best utility knives by a pretty wide margin. I use the compact one, but that's a matter a preference.

> Don't want to build one

I get this, because I had exactly the same position a month ago. But I just finished a build last night.

Here's what happened:

• I live in Ca, they are going to ban AR-15's in CA soon, so I got a couple stripped lowers for ~100$ each at the local gun shop, so no FFL mail order issues.
  
  
• On the advice of a friend, I went on gunbroker.com, just to peruse AR-15 parts to get a sense of what is required to build one. Ran into this, and impulse bought it (399$).
  
  
• Got fired up and picked up lower parts kit, buffer tube, CA bullet button, magpul back sight, and magpul stock(~150$) from LGS with the intention of getting a gunsmith to do the build for me.
  
  
• Putted around youtube and looked at build process. I have negative amounts of mechanical aptitude, but felt confident I could do it.
  
  
• Had a couple beers, took all the parts and my ipad with a youtube lower AR build tutorial to my garage, and had a fully built and functional Colt M4 A3 civ in less than 30 min. Good feels. Tools needed: 1/8 hex driver, armorer's wrench, 440 channel locks. I had the channel locks and hex driver, just bought the armor's wrench for $15.
  
  Total cost for my Colt M4 A3'ish AR: 100 + 400 + 150 + 15 = $665.
  
  So I get that you may not feel up for a build, but let me tell you: If I can do it, anybody can do it. With the parts I ordered, it was less than 30 min build time and at no point did I ever feel out of my (not very deep) depth. Plus, it felt great to say, "I made dis." Even the not-so-into-my-gun-hobby wife was impressed.
  
  Also, as other's have said, you can still just buy a complete upper and lower, and still get more bang for the buck. But by picking up a stripped lower, it gives you massive flexibility of the final form of your AR and a massive cost advantage of being able to peruse the best deals on the internet without any need for FFL transfers. If you take your time and look for sells, you could easily save $100-200 from what I paid, or just get even better hardware.

Here's a breakdown:


Channellock 460- 4.25" jaw capacity - $30
Irwin Groovelock 16" - 4.50" jaw capacity - $40
Knipex Cobra 400- 3.75" jaw capacity - $60
Channellock 480- 5.50" jaw capacity - $50
Irwin Groovelock 20" - 6.00" jaw capacity - $50
Knipex Cobra 560- 4.75" jaw capacity - $100


The Knipex Cobras have a superior jaw design - they grip better than a pipe wrench and grip round pipe a lot better than the Channellocks, but the Channellocks are very good pliers as well, very durable and like you've noticed, probably the most popular choice. And the Knipex are obviously about exactly double the price and slightly less jaw capacity. The Irwin Groovelocks are another good choice - they function and have a jaw design very similar to the Knipex at a cheaper price. They are made in Taiwan however.

Not necessarily an anvil, but yeah a solid metal table would be pretty useful. You could use stone or hardwood though, if it was a worktable you didn't mind getting scorched. EDIT- this guy is just using a workbench vise with a small flat area for working on stuff like this. A quick google shows a decent one for $50. Leather welding gloves (last I checked, haven't had to buy new ones in nearly 10 years,) were $10 for good ones, $6 for cheap ones. Shipping is expensive on these but you should be able to find a local welding store or even someplace like Home Depot. Needlenose pliers aren't very expensive either.

If you want some of the absolutely highest quality bike tools without taking into account budget then look at Abbey Bike Tools and Silca. For non-bike-specific tools, then brands like PB Swiss, Beta, and Snap-On are all super high quality.

I would only recommend getting tools from these brands if you are a professional mechanic and have worked long enough to know what you want in a tool and are willing to spend a premium to have the best of the best. If you're just a home mechanic then you won't put enough use on a midrange set of tools to ever wear it out. This set of Hex Keys is great (Bondhus makes Park Tool's hex key sets) and should last you a lifetime as a home mechanic. For a screwdriver, just make sure you're getting one with a JIS tip instead of Phillips. Derailer Limit screws are JIS, not Phillips and using the wrong screwdriver on them can easily strip them. The Park Tool or Pedros sets are fine, as is any #2 JIS Screwdriver you find on Amazon. Personally, my favorite is the Vessel #2 JIS which isn't terribly pricey.

For bike specific tools just look at Park, Pedros, Birzman, Lezyne, and Unior. They all make quality stuff, so just go with whatever is cheapest. You may be able to find some no-name bike tools for cheap on Amazon, but then you're rolling the dice on quality.

Edit: Also, a Knipex plier wrench, while a bit pricey, is super high quality and can replace an entire set of metric wrenches.

Every shop is an extension of the philosophy of the person using it. As for tools, everyone finds their own level. A friend of mine uses a jigsaw multiple times per day, where I only pull mine out once a week. We make much the same kind of things. I advocate buying inexpensive versions of tools you think might be useful to you. When they prove useful, go ahead and invest in the best version you can afford- it will last for years, if not decades. I'm amazed at how often I use my hardened jaw Knipex nippers:
https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1466548721&sr=1-2&keywords=knipex

Cuts through piano wire all day long and don't dent. Cuts through coat hangar wire (one of my favorite materials on the planet) like it's butter.

Good luck!

I know tools so here we go. Focusing on the extras, luxuries, and conveniences. If I don't specifically note a manufacturer/model I probably just grabbed the first Amazon link to make it clear what I'm talking about.

• 12v impact gun/electric ratchet. These are an awesome luxury for working on cars, much time spent turning ratchets will be saved. Also useful around the house for driving sheetrock screws. I like the Bosch PS41 for bang for the buck and Milwaukee M12 for the full 12v set (they have a ratchet, Bosch doesn't).
  
• Fucking magnet trays, how do they work?!
  
• Amazeballs stocking stuffers: finger bit adapters.
  
• Timing light
  
• Torque wrench
  
• Dremel. I have the cordless one because every Dremel I've ever broke has failed at the brushes and it has a BLDC but that's actually been a really useful feature for working on cars. Grab and go.
  
• 4.5" grinder. Pick your favorite color but you usually can't go wrong with yellow or red.
  
• Wobble extensions
  
• Hex and/or Torx bit set
  
• TS8000 MAP gas torch and bottle. I should've put this higher cause this is crazy useful and everyone needs one.
  
• Decent wire strippers
  
• Multimeter/DMM. There are various guides out there but I think there's an Extech that's a commonly recommended entry level DMM.
  
• If they're into old shit aka carburetors grab an ultrasonic cleaner.
  
• Flex head ratchet in your favorite size.
  
• Snap ring pliers

I dunno. Aero doesn't really offer anything that you can't DIY pretty easily other than finish and I do like to rattlecan guns. As soon as we replace the oven in the kitchen, that might be migrating out to the garage to see if I want to get into Cerakote.

> The intergrated trigger guard is really nice

I like the ability to pick and choose, but I usually default to MagPul plastics.

> threaded bolt catch is a god send of making the hardest part of the lower build the easiest

Knipex flat jaw pliers for all the roll pins makes it super simple.

> I like the set screw in the back

4-40 tap and tap wrench along with a phat sack of these. If you chop a couple coils off the safety detent you can tap and thread that for the same screws as well.

Klein Tools 92906 ProPack 6 Apprentice Tool Set for Trade Professionals (6-Piece) https://www.amazon.com/dp/B004EKONLY/ref=cm_sw_r_cp_api_Qm5EAbQVA3JFH

That’s a good deal. It has lineman pliers, diagonal cutters, needle nose, wire strippers, and flat/ Phillips screwdrivers.

Screwdriver and Nut Driver 11-in-1 Multi Tool, Cushion Grip Handle, Industrial Strength Bits Klein Tools 32500 https://www.amazon.com/dp/B0015SBILG/ref=cm_sw_r_cp_api_yp5EAbSKE4D2A

This is a good all purpose screwdriver to carry around

Klein Tools NCVT-2 Dual Range Non-Contact Voltage Tester https://www.amazon.com/dp/B004FXJOQO/ref=cm_sw_r_cp_api_qq5EAbTTZ8GYW

This is a non contact voltage tester and it might just save you some pain/your life

Channellock 440 12-Inch Tongue and Groove Plier https://www.amazon.com/dp/B00004SBCU/ref=cm_sw_r_cp_api_xr5EAbWNKDP5C

You should probably get 2 pairs of these. It’ll help you twist on couplings and stuff

Stanley 33-725 25-Feet FatMax Tape Measure https://www.amazon.com/dp/B00002PV66/ref=cm_sw_r_cp_api_Xs5EAbGVWXZDV

A lot of people like these tape measures for their larger claws

Klein Tools 98002BT Bottle Opener https://www.amazon.com/dp/B00093GENU/ref=cm_sw_r_cp_api_4u5EAb52FZ742

This will help for when you go home

A gasket removal tool (OE has a good set here: http://www.orphanespresso.com/O-ring-Installation-Removal-Pick-Tool-Set_p_4667.html) and C clip pliers (get the channellock ones here: https://www.amazon.com/Channellock-927-8-Inch-Retaining-Plier/dp/B000TG80SY/, the generic ones are awful). Outside that, only generic tools like wrenches and screwdrivers. An E clip tool is also really useful to keep the E clips from flying across the room, but not strictly necessary. https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W

You'll need gaskets of course, for a gasket kit, OE offers a good inexpensive one: http://www.orphanespresso.com/La-Pavoni-Rebuild-Kit--PRE-Millenium-Models--Full-Kit_p_4749.html

But you'll want a few other things too.

Base gasket: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-europiccola-tank-to-base-gasket

Relief valve stopper: https://www.espressoparts.com/la-pavoni-relief-valve-spring-stopper

If it's really old (like, very earliest models), you might have to add this on too: http://www.orphanespresso.com/Brass-Sleeve-Machine-Portafilter-Gasket_p_1608.html

You should probably also upgrade the thermofuse to one of these: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-high-limit-reset-thermostat

You may or may not end up needing more, but this should suffice for a standard rebuild as long as any parts that aren't supposed to be consumable aren't broken.

As a further option, you can also upgrade to stainless steel hardware pretty cheap: http://www.orphanespresso.com/Pavoni-Cremina-Group-Rebuild-Stainless-Steel-Hardware-Kit_p_2005.html

Aaaaaand last of all, you can upgrade to an actually decent steam tip too: http://www.orphanespresso.com/OE-SLIM-Single-Hole-Steam-Wand-Tip--Stainless-Steel_p_2175.html

I looked at these for awhile but decided to take a chance and spend the money on what people claimed to be the superior tool, and having used it for awhile now I can agree it is awesome.

Behold, the Knipex 10" Pliers Wrench

It works like a combination crescent wrench / channel lock but has a lever mechanism (like vise grips) that bites down hard when you squeeze the handles together. Basically the harder you push/pull, the tighter the grip gets. The jaws always stay parallel so you can even use it on small nuts/bolts. Superb German design and construction. I am not a pro mechanic (or really a pro anything) but this is one of the coolest tools I've ever bought and is totally worth the $50 (at least if you like to buy awesome/$$$ tools). Oh and no more messing with that dumb thumbwheel on the crescent wrench. Fuck those things.

A hammer crimper will do the trick. They aren’t exactly pretty but the most expensive one is still cheaper than a off shore hydraulic crimper. I personally have a hydraulic crimper but I work as an installer part time. As for stripping/cutting I use a channellock cable cutter, it goes through 0 AWG like a hot knife through butter. For stripping I close the cutter on the wire sheath and spin it around the wire. Not enough to actually cut through the entirety of the insulation but enough to score it 2/3rds to 3/4ths of the way trough and then pull. It takes a little practice to not cut to far in and cut a bunch of the strands of copper. A razor blade and a steady hand can also be used with great success.

I followed this video: https://www.youtube.com/watch?v=zEQbQPAU9Ss

I bought this battery but it appears to be sold out: http://www.ebay.com/itm/261716925855. Just search eBay for an OEM Nexus 6P battery. I could not find any on Amazon.

I would STRONGLY advise you do not do this if you do not have the right tools. The other advice I'd give is that you need to ensure that you do not touch any of the glue on any of the pieces you remove or in the battery bay -- it will reduce the strength of the glue. The only big issue was getting the screen off. Be VERY careful as it is apparently easy to crack screens while taking them off this way. Do not put too much emphasis on one side of the screen -- slowly work your way around so that it pops off evenly. If you have a suction cup pliers or have access to them (https://www.amazon.com/AGPtEK%C2%AE-Opening-Suction-Platform-Smartphone/dp/B00VHOE3RE) I'd advise that you use those instead of trying to remove the screen with guitar picks and spudgers. It took two of us working together to get the screen off because of the lack of suction cup pliers.

Overall, it was not too bad. The scariest part is just the idea that you might screw something up and be out of a phone. I was at my wits end with my phone (under 1hr SoT and shut off anywhere from 15-30% of battery left) so I didn't really care. It was basically already unusable.

Probably because it's bulky as hell and near impossible to fit into any sort of remotely confined space. Other factors to consider- a lot of moving parts which are almost guaranteed to get gunked up and stick and/or break after any appreciable amount of torque.

It's a cool idea, but it's an impractical solution in search of a problem that's better solved by things like nut lathes and the objectively superior Kipex Pliers Wrench.

Edit- ideally you should own actual tools, particularly if you own a home or vehicle (shit, even if you rent a shitty apartment and only have a bicycle) Seriously though, a small investment in a basic tool kit can save you hundreds if not thousands of dollars performing basic repairs and maintenance on your home and vehicle. Chances are there's a YouTube video of what you're trying to do.

Typical home owners and typical car diy people don't need snap on tools. Yes they're much much better than Craftsman and 10000x better than harbor freight, but they are over kill for home use. I would definitely go buy decent tools over the cheap harbor freight kits. I had a few of the wrenches snap, and sockets chip far too easily. I have a decent 100 something piece set of Craftsman I bought during black Friday for about 35 dollars. One of the best investments I made in tools.

The only thing I actually bought that was top of the line are knipex locking pliers. My God. They are... I can't even explain how amazing they are. They have never slipped, ever. Even on wet nuts, total lockage. http://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

Well, I think I can shed a little light on what you're in for.

Years ago, a good friend of mine was still living at home with his father. We were both around 20 years old and my friend had just met his future wife. Finding time to be intimate in his father's small house was difficult at best.

One fortunate afternoon, his dad was out and about... my friend took full advantage, purchasing a 3-pack of Trojans and a rose to woo his beautiful lady. Sexy times ensue...

Afterwards, my friend tossed the condom in the bathroom trash (a notoriously short, easily accessible trash barrel). He then left to take his lady for a bout of laser tag or whatever us kids did at the time for amusement.

Cut to later that day, my friend returns home to find his dad crouched behind the family dog on the kitchen floor. Armed only with a pair of pliers and limited veterinary skills, he was pulling the used condom from the dog's rear end. The condom stretched about a foot before snapping free in a miasmic haze of Alpo and regret.

His father turned to my friend with a look of utter disappointment on his face and said, "I have no idea what you're up to when I'm not around but this will never happen again."

We all know the dog ate the condom... but on those nights when he's alone in bed, dark and cold, he wonders what his dad thinks.

TL;DR buy yourself a set of these: http://www.amazon.com/Stanley-84-114-Piece-6-Inch-Diagonal/dp/B0006HVU4W/ref=sr_1_1?ie=UTF8&qid=1335527522&sr=8-1

I can't speak highly enough of knipex's slip joints and especially their pliers wrench. Holy hell do I love their pliers wrench. This Raptor is also exceptional, and all the Raptor branded hand tools are are a very good quality for a very fair price.

Makita, Milwaukee and Dewalt all make very serviceable cordless tools. My brother runs Makita and likes them a lot. I'm in DeWalt, and some of the new 60v stuff is really cool. Also Dewalt has this impact driver which has a push button bit release instead of a collet and a three speed torque selector. Probably my favorite tool of all time.

will yours pop right thru 1/4" all thread?

because these will all day https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ/ref=sr_1_2?ie=UTF8&qid=1478499990&sr=8-2&keywords=knipex+diagonal+cutters

trust me

edit:wow that sounded dickish

but its true and super useful

"Dikes". Believe it or not, those are diagonal cutters.

https://en.m.wikipedia.org/wiki/Diagonal_pliers

Look under "jargon".

Also, as an aside, if you want high quality "channel locks" look no further than a German brand called Knipex (pronounced Kinnepex). I'm partial to the push button Cobra plier, but the more traditional "water pump plier" is also excellent. They cost a lot more than Channel Lock, but they have excellent leverage and really tough jaws that are narrow enough to fit into spaces other brands can't reach.

They also make a tool called the Pliers Wrench that replaces your adjustable crescent wrench and doesn't slip, need constant adjustment or round off corners.

Finally, their high leverage "dikes" get extremely high ratings.

Sorry to sidetrack you with a sales pitch, but I got excited when I read that you were starting to shop for better tools. If I had known about this brand ten years ago, I would have bought them first instead of wasting my money on cheaper tools.

https://www.amazon.com/gp/product/B00XZB3WKQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and
https://www.amazon.com/gp/product/B013L54JXY/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
and
https://www.amazon.com/AGPtEK-Opening-Suction-Platform-Smartphone/dp/B00VHOE3RE/ref=pd_sbs_469_1?_encoding=UTF8&pd_rd_i=B00VHOE3RE&pd_rd_r=V8A9V2GQ1XB65Y4M6KJG&pd_rd_w=Eifob&pd_rd_wg=HuH48&psc=1&refRID=V8A9V2GQ1XB65Y4M6KJG
and get some clear packing tape to use with suction cups as they don't stick to cracked screens without the tape over the cracks. These are the only tools you need for the type of work I do.

edit: I am not affiliated with jerryrigeverything but really enjoy his channel so thought I would support him by buying some of his spudgers. They are better quality than one's I have used in the past.

The cobras are amazing. The smooth jaw pliers are some of the best tools I've ever used. The small ones are really flipping handy.

Knipex Tools 86 03 125 5-Inch Mini Pliers Wrench https://www.amazon.com/dp/B00I8N282O/ref=cm_sw_r_cp_api_PA.FybHEQFVV3

The cobra 125mm small ones are killer too.

Also the little bolt cutters are amazing and have a great puller on them too.

Knipex 7101200 8-Inch Lever Action Mini-Bolt Cutter https://www.amazon.com/dp/B000SOSC4Y/ref=cm_sw_r_cp_api_0B.Fyb2HKFKMJ

It's all expensive and I have a lot of their stuff. I'm happy every time I pull one of them out of my bag. Highly recommended

I highly recommend the Hakko 936 soldering iron Hakko 888 soldering iron, which is still actually available. It's hard to fathom how a $100 soldering iron could be that much better than a $20 one, but once you start doing anything more serious than just sticking some wires together, it's worth it.

As for other tools,

• Standard needle nose, dikes, and pliers set
  
• Tweezers - Additionally plastic ones if you're going to do PCB etching.
  
• Dental Picks - for positioning surface mount parts and pushing wires into molten solder.
  
• Wire strippers - You'll often see people using the combo wire stripper / crimpers. They're not as nice as a real pair of strippers.
  
• +/-12V power supply for basic analog electronics, 5V for digital work
  
• Breadboard
  
• Solder sucker - Copper braid is useful for the same thing, but given the choice of the two, I prefer the sucker to undo soldered joints.
  
• 30x Jewelers Loupe - Mostly useful for surface mount work, but pretty much all soldering is easier when you're able to look at it.
  
  As for components, I've been buying them piece-meal for years, so other's will probably be able to yield you a better recommendation for kits than anything I can find just from a quick search. I do mostly digital work, so as far as passives, my main stock is:
  
  
• 0.1uF and 100uF capacitors, 25V
  
• 100, 330, 1k, 4.7k, 10k, 100k, 1M resistors
  
  If I need any other resistor for a specific project, I'll tend to just buy an extra 10 and keep them in labeled coin envelopes.
  
  Random other pieces:
  
  
• Precut Breadboard jumper wires
  
• 7805 - 1A 5V linear regulators
  
• 1N4007 diodes
  
• 1N4148 small signal diodes
  
• 3V linear regulators if you do low power work (MSP430, etc)
  
• An Arduino - If not for real projects, I use this a lot to hack together crude digital signal generators to test other chips.
  
• LEDs - I found a good deal on bright red ones, but any will do
  
• push buttons, power switches, DIP switches (4 in a tiny package that fits in breadboards)
  
• Copper clad perf board - To make through-hole projects permanent. Be careful because this also comes without the copper pads, which is just more of a pain in the ass to use.
  
• Copper Solder braid
  
  Edit: Fixed the soldering iron model.
  
  Disclaimer: I'm using my Amazon Associate links for all of these, which always feel a little amoral and a conflict of interest, but really, if my apartment were to go up in flames and I could afford it, I'd buy every link on this list right now. Does anyone have strong opinions one way or the other on using them?

S3D also cakes the models in supports, and I wouldn't be able to remove them by hand, so I got myself these things. They're cheap, and make removing supports of any kind significantly easier.

Also, have you tried using mesh mixer? Their supports are much easier to remove.

Answers:

1. A cable cutter https://www.amazon.com/Channellock-911-Cable-Cutting-9-5-Inch/dp/B00004SBDG/ref=sr_1_3?keywords=cable+cutter&qid=1556237766&s=hi&sr=1-3 makes a nice clean cut; electrician's side cutters squishes the cable https://www.amazon.com/Klein-Tools-J2000-48-Diagonal-Cutters/dp/B0006M6Y8O/ref=sr_1_1_sspa?crid=1YQ9ZDYTGHD0N&keywords=side+cutters+klein&qid=1556237820&s=hi&sprefix=side+cutter%2Ctools%2C182&sr=1-1-spons&psc=1 (I use side cutters as my next move is to put an end on it anyways)
   
   
2. Solder, Crimp or Compression connectors plus appropriate tools. Everyone has their favourite and it can become a religious war so I'll say no more. If crimping or compressing, use a ratcheting tool https://www.amazon.com/Hilitchi-Professional-Insulated-Connectors-Ratcheting/dp/B01IQIALJC/ref=sr_1_4?keywords=ratchet+crimp+tool&qid=1556237927&s=hi&sr=1-4 they usually look something like this but note the good handles cost upwards to $100 and the cheap ones (as pictured) aren't worth it as they wear out quickly. You'll also need a set of dies https://www.amazon.com/Greenlee-2656-CrimpALL-8000-Crimper/dp/B000JJGR1S/ref=sr_1_5?keywords=lmr+400+crimp+dies&qid=1556238008&s=hi&sr=1-5-spell for the appropriate size and type of coax. Some websites (DXE, Powerwerx) sell kits of this stuff for Ham use and the value is good.
   
   
3. No rip-off when you consider the value of the tools . . .
   
   
4. You always need a RF connector to attach a cable to anything; you can't splice the stuff and have the impedance remain intact.
   
   
5. Loss is additive in RF and your goal should be to minimize it everywhere and match impedance everywhere. Cheap coax will last a little while, better coax lasts decades - make the investment and you won't be sorry.
   
   73

This is the best roll pin starter I've used. If the pin is lined up with the hole, it will press in pretty easily. Then just use any pin punch to set the pin flush or just below the surface. I used to struggle holding a hammer in one hand and the punch and the part with the other. Now it's pliers in one hand, and the part in the other.

A lot of great suggestions on this list. What I haven't see is a decent set of pliers. I've used tons of crappy pliers in the past for a number of things, figuring that 'pliers are pliers.' Then I bought the Knipex Cobras through a Slickdeal for about $20. These things are unreal. Everything I throw at them they do great with - the hardened teeth are still looking new, and I don't baby these by any means. Can be used for pipe, but also relatively delicate work as well. They are shockingly lightweight, and the push-button adjustment is, just, amazing. I keep these and a Leatherman (also a good suggestion for this list) in my toolbox and they cover all my plier needs. Maybe also add a decent set of diagonal cutters to this list, I use those all the time too.

Got any good size channel locks you can get on it?

I had to put a screwdriver in the side and eventually went all the way through one time then turned. (This was on my ‘99.)

I bought this one not long after.

TEKTON 5866 12-Inch Oil Filter Pliers https://www.amazon.com/dp/B000NPR33O/ref=cm_sw_r_sms_c_api_BJtMAb2G01VJ8

When you got a put one back on, just do it snug with anti-seize. Pretty hand tight is good. The heat will expand it and cause it to seize up.

Agree with Phishmcz, your muscles will grow. I just started my apprenticeship a month ago and I can already see a difference in my upper body strength.

I am working through a training/apprenticeship program so I started two weeks after getting accepted into the program.

I work in commercial construction so my recommendations are based on the commercial side of things.

Invest in some really good channel locks. I currently have two pairs of these.

https://www.amazon.com/Channellock-440-12-Inch-Tongue-Groove/dp/B00004SBCU

I had originally bought a cheap brand and immediately regretted it. You will also need two pairs of the same size, not just one.

Invest in a good tape measure with a wide tape. This one is really good.

https://www.amazon.com/Stanley-FMHT33865S-FATMAX-Magnetic-Tape/dp/B00AGYYQW8/ref=sr_1_3?s=hi&ie=UTF8&qid=1518750296&sr=1-3&keywords=fatmax+tape+measure

The wider the tape the less likely it will twist and bend when it's extended.

Carry a pencil and sharpie with you at all times.

Work hard, be on time, watch and learn, and ask questions.

Don't forget to take water and lunch.

get a dedicated pair of flush side cutters like this
NEVER use them on metal, make this pair only for plastic. you will always have a nice clean cutting edge for everything from removing supports to snipping filament

also get a long thin needle nose pliers, again plastic only

then maybe a pin vise and a cheap set of drill bits if you do a lot of functional prints for cleaning out bolt/pin holes quicker.

Much better than channel locks: https://www.amazon.com/Knipex-8603180-7-Inch-Pliers-Wrench/dp/B000X4KP1C

I got a set of these after seeing all the mechanics at work using them. They are of course a bit more awkward than having the correct wrench due to their size, but they will never ever round a bolt head which makes them superior to other adjustable wrenches or pliers. Perfect for an on board toolkit

I use a pair of these as my main set of oil filter pliers, and something similar to this if a filter really wants to start some drama. Something like this socket type strap wrench pretty much always works as well, is cheap, and is easier to fit than the strap wrenches with the big plastic handles built in.

We had an epic clog in the bathroom sink once. The prior owners liked to cram hair down there or something. We ended up having to shut off the water to the bathroom, removed the piping, and manually scraping out all the goop and hair in the pipes. Then put it all back together and water test it. Took about 90 minutes and it has worked well ever since.

If you have to go that route get a pair of disposable gloves, one of those plastic drain snakes (about $2-$4 at HD), and a hook and pick set (saw one at autozone for $1.79). Don't forget some plumber's tape(just got some for $0.52 at walmart).

You can use either a big channel-lock pliers or an actual plumber's wrench (usually more expensive) to take apart the pipes, if you need to buy some measure your pipe sizes ahead of time. You will either need 2 of them, one to counterbalance your wrenching, or some other way to hold the other end in-place while you unscrew stuff.

Good luck!

As an aside: the amazon stuff I linked is waay over priced, but it lets you know what I am talking about, and I'm too lazy to find the best prices for stuff in your area.

Actually I didn't buy a set, but you can get a better deal on them if you do get one.

First I bought the 7 inch after using a coworkers' and thought it was nifty, but still thought it was ridiculous spending $45 on a set of pliers. Then I realized how amazing they are and about a month later got the 12 inchers and had no problem paying the $60 for them. Honest to fuck, even if they were $200 today I would buy them again.

Anyway. The set I've seen has 7, 10, and 12 inchers, and I can't see myself using the 10. Maybe on the rare occasion I need it to fit somewhere ridiculous. So, my next purchase is actually going to be this set which has the CUTEST little 6" model that I want for fitting in small places. Then maybe some day the 16 inch but I really have no use for that at the moment. Maybe just to match my 1.5 inch ratcheting wrench which also gets used about twice a year.

Don't listen to the guys saying you need to buy truck brands like Snap-on or MAC, they are overpriced and while they are very good quality the biggest reason mechanics use them is because they are frequently visited by the tool trucks meaning exchanging broken tools is easy. For the home mechanic they are extreme overkill.

Craftsman is OKAY, despite the detractor whining they are chinese-made (and lets be honest, unless you willing to pony up most tools you will buy will be Chinese anyways). I put them at the same level as Harbor Freight (at least the Harbor Freight Pro line, it will say on the label) mostly because they both have the same return policy on hand tools, if it breaks take it to the store and get it replaced.

I would put the box store brands (Husky for Home Depot and Kobalt for Lowes) in the same category as Craftsman and Harbor Freight but don't because while they have the same life time warranty on paper as HF and Sears (at least until it goes bankrupt like people have been predicting for a decade) I have heard stories of them making it either very difficult or impossible to return and exchange broken tools.

Either way unless you need high precision tools like torque wrenches, tractor wrenches, or high strength impacts you really can't go wrong with anything above discount bin or dollar store tool sets. The important thing is having the proper tool for the job, no using 3/8 ratchets to break rusted lug nuts business. I will also stress don't buy gimmick tools like spline sockets or ratcheting wrenches.

If what you are really looking for it tools off the beaten path I would recommend SK, Williams, Bahco, Craftsman Professional, and Proto for hand tools. The first 3 are OEMs for the truck brands and can usually be bought cheaper then them except for being a little harder to find, the Craftsman Professional line is still made in the US (with the price tag to match), and Proto is the pro line for Stanley.

Wera, Wiha, Kline, Knipex are all good brands for screwdrivers and pliers. I wouldn't know to much about them except for the decade old Kline crimper I have that's still chugging along after all the abuse I've heaped on it, and electricians swear by them. Knipex also makes one of the greatest tools known to man, probably the only gimmick tool worth it's salt.

This thread can give you a good starting point if you would like the truck brand quality without the truck brand price.

You also can't go wrong browsing craigslist for people who are upsizing/upgrading/retiring/downsizing and looking to dump their old stuff.

I'd suggest a Knipex Pliers Wrench (expensive, but very nice to use for a lot of projects) and some spring punches and a head lamp to keep both hands free to use all your other tools.

My buddy has the Knipex lineman's pliers and I have to say they aren't anything special. He still uses his Kleins because they are just more comfortable to use.

I also prefer the Klein lineman's pliers but I like the Knipex for their channel locks and I REALLY like their pliers wrenches

Multi-grip (as we call them in Australia) or Channelock pliers like these, the harder you turn the harder they grip. You’re really going to fuck the finish up on the chrome but it looks like that’s already happened.

I’ve dealt with plenty of these and I’ve never needed anything more than my multi grips.

edit: probably better with V-grip jaws like these, actually.

The oven pan, the frying pan, etc. Mittens breack. The tail of the frying pan melted.

The idea of grabbing anything hot, and securely move it from one place to the next. Key word is secure.

For example I love to cook potatoes on a metal plate. I cut them into round wheels nd place them on the heated steel plate. Let them cook then serve hot or cold with onions and sunflower oil.

Use knife to turn them bad boys while holding the plate with the other hand, using pliers.

Sorry, english is not my native tongue

This things https://www.amazon.com/Stanley-84-114-Piece-6-Inch-Diagonal/dp/B0006HVU4W/ref=sr_1_4?s=power-hand-tools&ie=UTF8&qid=1541369010&sr=1-4&keywords=pliers.


Steel plate: https://www.amazon.com/Hot-Rolled-Steel-Plate-10/dp/B00YWBQ5AW/ref=sr_1_3?ie=UTF8&qid=1541369144&sr=8-3&keywords=steel+plate

I cut out mine from a big sheet of steel using a grinder. Not sure about thickness tho.

Honestly, I learned the importance of pliers in the kitchen back in highschool and my burned fingers/ year dropped to 0. But, to each his oun.

Here's what I would personally recommend for a decent minimum starter set, assuming you're just looking for general homeowner/handywork tools:

• 5-in-1 screwdriver
  
• 16 oz. claw hammer
  
• 6 in. adjustable wrench
  
• Measuring tape
  
• Allen wrenches
  
• Pliers
  
  Those are all solid quality tools that I've personally used in the past. There's obviously tons of other stuff you'll need along the way if you're into fixing things but that's a great starting point.

Never a fan of knives as I can never use them with gloves on. Some guys carry a gerber or leatherman but that is more for convenience.I carry channellock cable cutters for getting myself out of an entanglement.

As for lights, I have a streamlight survivor LED that I love. I got the battery one and just leave it on my coat.

scalpel, playing cards, guitar picks, hair dryer, screen opener.

I had purchased a new back when I got the battery, but the screen opener tool made removal pretty easy and I ended up not needing to replace the rear housing.

I have stripped my fair share of screws, mainly because I'm impatient, and not because my tools suck- I use a nice set of Torx screws that are proper metric sized.

What I've found very helpful, and recommend to anyone having trouble stripping screws, is to get a pair of VamPLIERS - which allow you to grip a stripped screw and remove it pretty easily. I've used these more times than I'd like to admit. So far there isn't a stripped screw that I haven't been able to remove with these.

It can work as a "pass-through" socket in a pinch, on the smaller sizes where the bolts will fit through the square-drive hole.

Their site shows it pictures with an adjustable wrench, which seems less tedious than always trying to find the exact wrench to use with 'em - Milwaukee should hurry up and include a knock-off 6" Knipex Pliers-Wrench with these sets.

I often find myself spinning a nut on grasping the outside of a round deep socket, these squared bottoms will help with hand-spinning like that.

A 6-point design (like a spark plug socket) would've allowed you to use the box-end side of a wrench, for more indexing options and more positive holding - if they wanted you to use real wrenches... that is why I think these sockets should be used with a Pliers-Wrench (Knipex) instead. And to be different, but I have a Stahlwille deep that has a square bottom, so it's not like they invented this concept or anything, but I still appreciate it.

Some things that I'd consider missing but important would be: a bottom bracket tool, crank puller, cone wrenches (for those who have cup and cone bearings), torx drivers (for disc brakes). I'm not sure about the cable puller (it's a nice to have). I'd put a small grease gun and some nitrile gloves above a cable puller. I'd replace the spanner set with an adjustable crescent wrench (or better yet, a Knipex plier wrench - they're amazing). I also keep scissors in my kit for silly things (cutting handlebar tape, opening packages, etc.).

I wholeheartedly agree with omitting a spoke wrench ; )

Okay, this one is not exactly beginner, but for me no tool set is really complete without Knipex pliers. The parallel jaw design gives them an amazing combination of adjustment range and gripping power, all without marring the surface of bicycle components. They are expensive, but well worth it.

Knipex are amazing. I borrowed them constantly for like a week and bought this set and recommend them to everyone.

Knipex 002006S1 3-Piece Cobra Pliers Set (7-Inch, 10-Inch, & 12-Inch) https://www.amazon.com/dp/B000X4KNTG/ref=cm_sw_r_cp_apap_O5HerMerjQW2o

Tools are good. Don't know what he needs but these are the best pliers out there.

Pliers are super useful.

I think these days most homeowners could get by with one good locking pliers (e.g Vise Grips) and one good water-pump/tongue-and-groove pliers (e.g. Channellocks) and an adjuststable wrench (e.g. Crescent).

I also think that some of the newfangled versions like these at Lowes or this much more expensive Knipex original perform most of the functions of channellocks AND crescent wrenches (and, to some degree, Vise-grips). So maybe think about those.

That or a worthwhile Vise-grips type pliers, as those are very versatile.

The "sets" of pliers are, imo, not that worthwhile. e.g. needlenose pliers: some people might use them all the time. I don't own any and never miss them. I have linesman pliers, but almost never use them. I would venture to guarantee that out of that set you posted, the channel locks and slip joints would get 95% of the use combined and the others would hardly be touched.

It looks like people have mostly got you started here in terms of supplies. In terms of tools though, this is what I keep in my rebuilding stuff (linking to Amazon just because its easier):

• Small screwdriver set OR Hex set OR a combo set. Which one will depend on the RBA you get, but eventually you'll probably find yourself with ones that have Phillips and Hex screws.
  
• Butane Torch. You can get this same one on Fasttech for $4 if you don't mind the shipping time.
  
• Wire cutters, either full size or micros
  
• Pliers, I also have a set of channel locks accessible, but not in my normal kit, mainly to try and get my Bombshell Stinger apart
  
• A generic desk light or something like helping hands can save a lot of headaches.
  
• Cheap multimeters can be found from $5 - $20
  
• Exacto knife because knives always come in handy at some point (rule #9)
  
  Other generic stuff:
  
  
• Toothpicks (great for wrapping coils around)
  
• Cotton swabs, cotton balls and paper towels
  
• Bic lighter
  
• Scissors for cutting wick (I use the wire cutters, but if you have micros, 3mm wick might get messy/frayed)

I just grabbed one of these and it is great, I hope https://www.amazon.co.uk/gp/product/B00I8N282O/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/Milwaukee-48-22-3079-Combination-Stripping-Electricians/dp/B005G111FQ/ref=mp_s_a_1_1?ie=UTF8&qid=1538326259&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=milwaukee+stripers&dpPl=1&dpID=41mK6dmyUiL&ref=plSrch

Those strippers are pretty awesome. I also have a pair of catapults for panel work or Big JBs etc.

These vampire pliers are pretty handy, though a bit expensive.

You can also get a set of screw extractors at Harbour Freight, but that screw might be too small.

The dremel slot method might be the best suggestion in this situation.

I would get him a these, seriously the best I've ever used and totally worth the money. A few companies have copied the push button design, but there is no comparison. Traditional toungue and groove pliers are so clumsy after using knipex.

Knipex get pretty rave reviews from people on YouTube if you want to see why it's worth paying 2x there price of channel locks.

Knipex 002006S1 3-Piece Cobra Pliers Set (7-Inch, 10-Inch, & 12-Inch) https://www.amazon.com/dp/B000X4KNTG/ref=cm_sw_r_cp_apa_mG5mybQPZEYZ4

Vice grips work better than punches in my opinion. Just make sure to electrical tape up the jaws. For about $50 you can get these which have flat jaws that stay parallel to each other and make roll pin installation the easiest part of an AR build.

The Pliers-Wrench is a truly new tool, which is just beginning to get picked up on by the el cheapo tool companies. They're great for someone who does a lot of everything.

Obviously the motherload of tools is back in the shop, but this is what I have on me at all times while I'm out and about on property.

Knipex 10-Inch cobra pliers

Fenix PD35

Leatherman Bitkit

Leatherman Extender

Leatherman Wave+

Work issued radio

Belt with standard sheaths for Leatherman and Fenix, and an RAE Gear Bitkit/Extender sheath and a Stanley 16' tape

Work keys: Keysmart on a Handgrey H3 Carabiner with a Kershaw Keytool.

Car/house keys on a Leatherman Style CS

Ridge Wallet

Benchmade Griptilian with [AWT Hive scales](https://appliedweaponstech.com/products/special-knife-grip-kits] on a Beard and Owl Hank

Yall better appreciate all these goddamn links lol

https://www.amazon.com/Williams-50673-8-Inch-Socket-15-Piece/dp/B005VMVEV6/ref=mp_s_a_1_7?keywords=jh+Williams+set&qid=1565396842&s=gateway&sr=8-7

https://www.amazon.com/Williams-100P-8MD-8-Piece-Premium-Screwdriver/dp/B002NH5F30/ref=mp_s_a_1_2?keywords=jh+Williams+set&qid=1565396884&s=gateway&sr=8-2

https://www.amazon.com/Williams-50661-4-Inch-Socket-27-Piece/dp/B002O18PLO/ref=mp_s_a_1_5?keywords=jh%2BWilliams%2Bset&qid=1565396884&s=gateway&sr=8-5&th=1&psc=1

https://www.amazon.com/KNIPEX-Tools-9K-00-Combination/dp/B00KBCM456/ref=mp_s_a_1_6?keywords=knipex+pliers+set&qid=1565396944&s=gateway&sprefix=knipex+plier&sr=8-6

https://www.amazon.com/Sunex-2569-Master-Impact-43Piece/dp/B00MPQ88RY/ref=mp_s_a_1_3?keywords=sunex+1%2F2+impact+socket+set&qid=1565396983&s=gateway&sprefix=sunex+&sr=8-3

https://www.amazon.com/Ingersoll-231C-Super-Duty-Impact-Wrench/dp/B0002SRM3I/ref=mp_s_a_1_6?keywords=ingersoll+rand+1%2F2+impact&qid=1565397014&s=gateway&sprefix=inger&sr=8-6

https://www.strictlytoolboxes.com/tool-vault-56-11-drawer-tool-cabinet.html

https://www.amazon.com/Streamlight-Stinger-Flashlight-Steady-Charger/dp/B0015ZO8VG/ref=mp_s_a_1_9?keywords=streamlight+flashlight&qid=1565397140&s=gateway&sprefix=streamli&sr=8-9

https://www.amazon.com/Sunluway-Filter-Socket-Adjustable-Removal/dp/B07MGR24BP/ref=mp_s_a_1_17?keywords=oil+filter+socket+set&qid=1565397258&s=gateway&sprefix=oil+filter&sr=8-17


https://www.amazon.com/Industrial-CDI-2503MFRPH-Adjustable-Micrometer/dp/B000KL4H80/ref=sxin_3_sxwds-bovbs?keywords=cdi+torque+wrench&pd_rd_i=B000KL4H80&pd_rd_r=cb4b628e-131d-4fcc-b250-1d9ff8c30f7a&pd_rd_w=dmdpJ&pd_rd_wg=pkYb4&pf_rd_p=eba0c0ae-19a3-4eb8-a600-1bc2a745bcd0&pf_rd_r=DDV7A2667PM9STRGS9T6&qid=1565397296&s=gateway&sprefix=cdi



Buy this list and stay away from tool trucks. Good luck

I don't know what kind of work you do, I do everything, and once in awhile these save the day. They aren't tools I use often but they make life easier sometimes

Screw Extractor set

Knipex Plier Wrench

Klein tube cutter

Deep sockets in small case with an Impact Adaptor

Klein cct finder

Here's some essentials that I recommend picking up. They're all a bit pricey, but it's better to buy one pricey set and never buy another than buy ten cheap sets.

Screwdrivers: https://www.amazon.com/Wera-Kraftform-Screwdriver-Lasertip-6-Pieces/dp/B007NLPJN2/ref=sr_1_1?ie=UTF8&qid=1501608941&sr=8-1&keywords=wera+6-piece+screwdriver+set

Pliers: https://www.amazon.com/Tools-9K-00-80-Combination/dp/B00KBCM456/ref=sr_1_9?s=power-hand-tools&ie=UTF8&qid=1501609025&sr=1-9&keywords=knipex

Drill/Driver: https://www.amazon.com/Makita-XPH102-Lithium-Ion-Cordless-Driver-Drill/dp/B01L84A470/ref=sr_1_2?s=hi&ie=UTF8&qid=1501609078&sr=1-2&keywords=makita+drill or https://www.amazon.com/Dewalt-DCD771C2-Cordless-Lithium-Ion-Compact/dp/B00ET5VMTU/ref=sr_1_1?s=hi&ie=UTF8&qid=1501609100&sr=1-1&keywords=dewalt+drill

Snap on sells knipex pliers, dykes, etc. If you don't own any knipex stuff, it's great.

My person favorites are these:


https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ


https://www.amazon.com/KNIPEX-Tools-00-20-US1/dp/B000X4KNTG/ref=sr_1_5?s=hi&ie=UTF8&qid=1526243314&sr=1-5&keywords=knipex+plier+set


Snapon sells these with their logo on them, I've worn a few sets of the pliers out, the dykes I generally lose before I wear them out.... They are great for cutting through shift cables and doing drum brake work.

Here's the cheapest alternative I can find.

Stanley 84-096 5-Inch Needle Nose Plier https://www.amazon.com/dp/B0001IW50Y/ref=cm_sw_r_awd_RsRevb061Q26J
https://www.amazon.com/dp/B0001IW50Y/ref=cm_sw_r_awd_RsRevb061Q26J

SE - Hip Flask & Funnel Set - Stainless Steel, 8 oz, 2 Pc https://www.amazon.com/dp/B002SB5MYS/ref=cm_sw_r_awd_txRevb0Y2W1S5
https://www.amazon.com/dp/B002SB5MYS/ref=cm_sw_r_awd_txRevb0Y2W1S5

(sorry for being a smart ass, best of luck to ya)

Batteries on the 5S are super easy to replace. Get a weird suction cup pliers thing and a new battery kit. If you know how to use a screwdriver, you can have like-new battery life in about half an hour.

You don't actually need 'chainmail' pliers. Some basic pliers from your local home center will be just fine. Like this set will be fine I think:
https://smile.amazon.com/Stanley-84-114-Piece-6-Inch-Diagonal/dp/B0006HVU4W/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1481595883&sr=1-2&keywords=pliers

Bonus crappy cutters as well!

https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

These things are life savers, they are like a crescent wrench in that they close parallel but you can let up and reset them much easier than a crescent wrench, basically a ratcheting action. they are expensive but you get what you pay for for and these are top notch.

maybe those knipex things? i don't own a pair, but i've seen people praising them and am keeping my eyes open... (hopefully at a more reasonable price!)

https://www.amazon.com/KNIPEX-Tools-86-03-125/dp/B00I8N282O

I've had no luck with extractors. However, I love my Vampire plier.

Pretty good for a first go!

As far as improving from here, there are definitely some low hanging fruit.

• I see some fingerprints (far left shoulder pad for example). You could get a fancy paint handle from GW or just buy some large corks and stick it the base with blue tac so you can handle your models without touching any of the painted areas. If it happened during glueing then it’s just a matter of using less glue and keeping your hands clean or maybe using tweezers or pliers (I use these).
  
• You could dry brush a medium grey (GW Dawnstone for example) onto the base to bring out the texture there.
  
• Consider painting the orange on top of a base colour with better coverage to avoid the black showing through (GW Mournfang Brown, Mephiston Red or Jokearo Orange)
  
• A black or dark brown wash over the metals areas would be a very simple way to improve those areas (GW Nuln Oil or Agrax Earthshade for example).
  
• A matt varnish would knock down the glossiness a lot. Most people prefer a matt finish for their miniatures but if the glossy look is what you were going for ignore this one.

I just bought this utility knife last week and i [explitive] love the thing.

I bought these knippers and this rivet setter for rivets.

No problem, in no particular order of relevance, a few other great ones to consider are:

Knipex Pliers Wrench - My single favorite tool ever

Felco C7 Cable Cutters - You can usually find these used and sharpened for $20 on eBay

Dualco Grease Gun - Your bike needs grease, this makes it easy

Motorex 2000 Waterproof Grease - Can grease be beautiful? I think so. Exactly like the Dura Ace grease

Wera Hex+ Keys - I know you have some already, but the slightly scalloped faces of these "hex plus" keys really do allow you to remove very stuck fasteners without stripping, and I have even removed bolts stripped with standard keys

I've always used these Channel Locks open them a bit and put in the channel, then turn. also good for opening other clean outs

Tools to buy today

Knipex 8701250 10-Inch Cobra Pliers

[Stanley Proto J1316AVP Antivibe Ball Pein Hammer, 16-Ounce] (https://www.amazon.com/dp/B00H1LLFFA/ref=cm_sw_r_cp_apa_i_RJnQCb4SE5G75)

[Mayhew 61355 Dominator Screwdriver Pry Bar Set, Curved, 3-Piece] (https://www.amazon.com/dp/B0000T4URU/ref=cm_sw_r_cp_apa_i_CSnQCbKKNE6HK) you'll carry the small one in your pouch, you'll keep the other 2 in your toolbox. You'll learn to love prybars on this job.

It's not too difficult so long as you can do some basic soldering to connect the wires and possibly to secure the driver to the pill (drivers with components facing the battery side may prevent the driver ring from screwing in; these drivers may need to be soldered in place instead).

The MTN page for S2+ hosts has a list of what you need for a triple setup.

If you don't already have one, I recommend picking up some snap ring pliers that include smaller bit sizes, such as this channellock. This will make screwing the pill and retaining rings easier than using regular pliers or tweezers.

You mean these?

http://imgur.com/gallery/Jmu5C

Those are some binding/terminal blocks I made awhile back for testing speakers/drivers, etc. I can plug in cables with banana plugs on them, and clip on to the terminals to test different drivers, etc.

There's some led tape/strip lighting under the top most shelf, and a clamp on adjustable led light with magnifying glass built in. I can swing it in when I need, and out of the way otherwise.

I think the magnifying lamp is this one: https://amzn.com/B00UW2IRJ2

The diagonal flush cutters are:
https://amzn.com/B000IBSFAI

and the small nose pliers are:
https://amzn.com/B0006N73BU

The little parts boxes are from a Bosch organizer:
https://amzn.com/B00BD5G6X6

There's cheaper options, but I had the organizer and extra bins so I used those.

Fire extinguisher is a Kidde ~3lb standard fire extinguisher. An absolute must imo.

The drawers are great, when I'm properly using them I can keep the desk clutter free.

Generally when I'm working on a project, if it's going to take longer than an hour or so, I put all the parts needed into bins, organize/label all the components. Then get started on the build. I have a small whiteboard to the left of the desk that I can pin up schematics, and take any quick notes while I'm cussing myself for forgetting something obvious.

I've used an oil filter wrench before, it works pretty well

Tools would be a great start. Build a toolbox with your standard everyday tools in it. A hammer, phillips head and standard screwdrivers, pliers, needle nose pliers, Channel Locks, a small prybar, A small socket set (I got This One and it has been all I have ever needed!). You can expand to a multi-tool, mallet, crowbar, and similar things later. In my view, every person should have a tool box containing at least those basics. It should be your 18th birthday present if you did not get it before. I like Craftsman, because if I break them I can get new ones, but any brand will do. You can find stuff at flea markets and yard sales for a dollar sometimes or less. And if you find craftsman ones, you can take them into a Sears, even if they are old and rusty, and get brand new ones.

Best $12 I ever spent.

https://www.amazon.com/dp/B000NPR33O/ref=cm_sw_r_taa_ZtsOybJ1G5QCR

It's time you guys upgraded to the best tool ever made. http://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

I love these 6 & 1 combo pliers from Milwaukee

Depends, I just yesterday bought a set of 3 channel lock tongue and groove pliers on sale for under $50CAD new (https://www.amazon.com/Channellock-GS-3A-Tongue-Groove-Acetate/dp/B01HZHASN4)

And looked online at the equivalent of it for knipex and its 3 times the price (https://www.amazon.ca/Knipex-002006S1-3-Piece-10-Inch-12-Inch/dp/B000X4KNTG/ref=mp_s_a_1_3?keywords=knipex+cobra&qid=1570395546&sr=8-3)


I will probably still pick up the knipex ones later because they work great. But the big factor here is price difference

Everyone making an AR should get this wrench. Perfect for pushing in roll pins and great for thousands of other tasks around the house/car etc.

https://www.amazon.com/gp/product/B000X4OG94/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

my favorite oil filter wrench is decent grip sandpaper. currently using a strip of 150 grit for drywall sanding. grips oil filters like a mofo.

edit: you mentioned amazon. I've bought some Tekton branded items off of there and it feels in line with harbor freight, maybe up in their pro line as to quality. however if I ever had a issue they hooked me up even years later. I bought a hose reel from them 3 years ago and the locking arm started to wear out. they shipped me a new part for it free of cost. even gave me a maintenance pointer on it. gear wrench is on there and they got good enough tools (never dealt with something broken) I'm eyeballing these Knipex non nut fuckers right now https://www.amazon.com/KNIPEX-00-20-06-US2/dp/B005EXNT2Y/ref=sr_1_8?s=power-hand-tools&ie=UTF8&qid=1496376559&sr=1-8&keywords=knipex

You can't go wrong with Knipex pliers! They are some of the highest quality, most useful pliers ever made.

I'd change the oil and filter again ASAP. It most likely won't blow up in a few hundred km, but it really should be done. What kind of filter wrench are you using? If it's really stuck I'd recommend getting the appropriate sized end cap wrench like these: https://www.harborfreight.com/End-Cap-Oil-Filter-Wrench-Set-4-Piece-63707.html

With one of those and a long ratchet or breaker bar you could probably remove a filter installed by The Hulk.

Edit: if you can't find the right size or you'd rather have an adjustable tool, you could also try this type of pliers: https://www.amazon.com/TEKTON-5866-12-Inch-Filter-Pliers/dp/B000NPR33O

A pair of these serve the purpose of an adjustable wrench better than any crescent wrench or ford wrench and I can't imagine water or rust would seize the adjusting mechanism like it would the roller screw on a normal adjusting wrench.

I was just trying to remove some one way screws myself, but many of the solutions listed here were out of the question.

Ended up getting these: Vampliers

Silly name, but worked like magic, even on the tightest ones. The grip is phenomenal.

knipex (one of the really good tool/plier brands), 66€ on Amazon germany https://www.amazon.de/Knipex-87-560-Cobra-XXL-Wasserpumpenzange/dp/B000SOVRNC

• Laptop
  
  
• Logitech MX Rechargeable Bluetooth Mouse
  
• Communication Cables (USB Serial Converter, DB9 Gender Changers, AB Cables, Ethernet of various sizes, RJ45 Coupler, etc.)
  
• Wiha SlimLine Kit
  
• Fluke 789 Processmeter
  
• Test lead Kit
  
• Voltage Sniffer
  
• 5-Port Switch
  
• Wire Stripers
  
• Wiha Dikes
  
• Needle Nose
  
• Fold-up Allen Wrench
  
• Klein Tool Bag
  
• Swiss Army Backback
  
• Electrical Tape, Fuses for Field Install and Multimeter Spares, Surge Protector, USB Drives with Automation Software, Fold-up TV Dinner Table, Fold-up Chair with Cushion, Notebook, Business Cards, Pens, Sharpies, Phone, Hardhat w/ Headlamp, Safety Glasses, Electrically Insulated Steel Toed Boots.
  
  
  
  This is setup is mainly for project startups and it would probably change if I was in more of a service engineer role.

Pliers with parallel jaws and mechanical advantage. They aren't cheap, but the Knipex 86-03-125 are the only way I can work 14ga anodized titanium without marring up the anodizing. TRL has some nylon jaw pads that can be cut down to fit them as well.

https://www.amazon.com/Knipex-Tools-86-03-125/dp/B00I8N282O/ref=sr_1_1?ie=UTF8&qid=1517893706&sr=8-1&keywords=86+03+125

You can buy oil filter wrenches that look like this or this. Both work really well and most auto parts stores or Harbor Freight carry them. A large pair of channel locks work as well. The filter is already fucked, so don't be afraid to squeeze it into an oval shape to get a good bite on it.

The coolant line looks like a pre-heater for the intake manifold, where it runs coolant through the intake to make it heat up faster so that the engine can lean out (fuel injection doesn't have a choke, but does essentially the same thing when the engine is cold and that is richen the fuel mixture). Again, a foot or so of 3/8 or whatever size heater hose is only a few dollars at an auto parts store.

I spent ~$32 total repairing it, all I needed was a youtube video, this toolkit, this opening tool, and this new glass. That first tool kit was not totally necessary because all the tools I really needed were included with that glass, but it was nice to have nonetheless.

You do need a hairdryer also, I already had that.

Edit: Not sure what to say about the motor, I didn't touch that. Maybe you need a whole new camera unit.

Are you unscrewing the knurled part?

That's the part with the texture. It's called knurling.

Use a pipe wrench or channel lock pliers to loosen it enough to unscrew by hand.

> I used a screw driver for the pins on my first one. A punch set isn't needed

like a phillip head screwdriver? geez wouldn't that just open up the pin when you hammer it in? Seems like a terrible method for doing that. If you don't have punch, something like this would be a much better alternative to get those pins in

As far as time and knowledge goes, it takes a considerably less amount to buy a whole rifle comparing to DIY and that's what the OP is alluding to. It's like getting an oil change, most people can probably do it themselves but a lot of ppl choose not to.

Be sure to wiggle the trigger guard a little bit as you're pushing the pin in so the pin doesn't bottom out.

Honestly, all the roll pins on an AR convinced me to buy Knipex pliers.

https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

Although it's kinda expensive, I've come to love using a Knipex wrench for lowers in place of punches, just need some masking tape covering the parts of the lower it makes contact with and its effortless to get those pins in (several layers of tape for the bolt catch install).

https://www.amazon.com/Knipex-8603180-7-Inch-Pliers-Wrench/dp/B000X4KP1C

Since it clamps down straight rather than at an angle it hasn't marred any of my powers finish with some tape.

I have to mention this. If you're down for picking up an heirloom quality tool that will do this job like a fucking champ (and also do so much more), check these little guys out.

Have you heard of knipex?

This is my favorite tool

Those look like the alligators, I think he's referring to these which I've heard great things about but I don't quite do enough work where they'd be needed to justify them for myself.

Incredibley expensive, but the best damn one handed wrenches I've ever used: KNIPEX 00 20 06 US2 3-Piece 7, 10 and 12 Pliers Wrench Set https://www.amazon.com/dp/B005EXNT2Y/ref=cm_sw_r_cp_apa_FJOkybNPVQC6W

Best tool ever for the job? Knipex plier-wrenches. Linear movement, just like installing pins or bearings with an arbor press.

Probably not worth the monies for just installing pins in an AR here and there, but I have a couple of pairs from my days of traveling around installing robotics and other machinery.

these are pliers you seek my friend

For next time, these can save some hassle

http://www.amazon.com/Vampire-Professional-Tools-International-VT-001/dp/B006YJKAPQ

Anytime. The adhesive strips under the battery can be tricky, just make sure to take your time with them. I use the suction cup tool like the one here to remove the screen from the case.

https://smile.amazon.com/AGPTEK-Opening-Suction-Platform-Smartphone/dp/B00VHOE3RE/ref=smi_www_rco2_go_smi_8217842112?_encoding=UTF8&hvadid=309807921328&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031529&hvnetw=g&hvpone=&hvpos=1o2&hvptwo=&hvqmt=&hvrand=789105963320585715&hvtargid=pla-492427137091&ie=UTF8&linkCode=df0&psc=1&tag=hyprod-20

from left to right mini bolt cutters , cable sheers , pliers wrench , cobra pliers , electricians pliers $80 is a good deal. and you can probably get more re-selling since they are brand new. I would also bet good money they are stolen.

"Knipex is probably overkill"

that said:

https://www.amazon.com/Tools-9K-00-80-Combination/dp/B00KBCM456/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1478819393&sr=1-1&keywords=knipex+set

)

I've found these work better than anything I've ever tried.

TEKTON 5866 12-Inch Oil Filter Pliers https://www.amazon.com/dp/B000NPR33O/ref=cm_sw_r_awd_6OzAub010K5RS

Someone better tell them that, then.

https://www.amazon.com/Knipex-002006S1-3-Piece-10-Inch-12-Inch/dp/B000X4KNTG/ref=sr_1_2?ie=UTF8&qid=1521552216&sr=8-2&keywords=knipex+slip+joint+pliers

Allow me to change your world... these are the smooth jaw versions which have a camming action such that the two faces are always parallel and there’s a high mechanical advantage on the grip. I own the 10 and 7” size... never go without them.

https://www.amazon.com/gp/aw/d/B000X4OG94/ref=mp_s_a_1_sc_5?ie=UTF8&qid=1525621589&sr=8-5-spell&pi=AC_SX236_SY340_QL65&keywords=kinpex+pliers

these

https://www.amazon.com/KNIPEX-87-01-125-SBA/dp/B005EXOL08

or these

https://www.amazon.com/gp/product/B00I8N282O/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

would be much better.

Always wear a mask. Even if it does not have asbestos, gypsum dust in not good for the lungs.

I know that diagonal cutters do not cut perfectly flush. Get a good pair of high leverage pliers, and cut as close as possible. Once the sheetrock goes up on the wall, the little pieces of wire will be hidden forever:

https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ

Tell brother to take a mega boatload of pictures, please. This is an important time in your family's life, and deserves to be documented.

https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94/ref=sr_1_6?qid=1549846144&refinements=p_89%3AKNIPEX+Tools&s=power-hand-tools&sr=1-6

Might be an easier to purchase from link, but /u/RainBoxRed got it right. I'm not sure if they're worth it but if you don't own a crescent wrench and think you need one, I'd but that instead. They stay tight on the fastener and when you use them in the right direction, they tighten as you pull or push on them.

Mike Pekovich (of Fine Woodworking Fame) recommends these: https://tltools.com/collections/unscrew-ums/products/the-handy-one-s-set it is a set that includes 1/8", 5/32", 3/16", 7/32" and 1/4" cost is around $45 shipped. There are also screw extractor pliers: https://www.amazon.com/Vampire-Professional-Tools-International-Extraction/dp/B006YJKAPQ/ref=pd_bxgy_469_img_3/137-6896628-8687019?_encoding=UTF8&pd_rd_i=B006YJKAPQ&pd_rd_r=a79551ea-8192-11e9-a9ce-814cf5dd9e62&pd_rd_w=WXdu0&pd_rd_wg=IPjbd&pf_rd_p=a2006322-0bc0-4db9-a08e-d168c18ce6f0&pf_rd_r=ZPHHEVMHF3DGR8B47NQZ&psc=1&refRID=ZPHHEVMHF3DGR8B47NQZ (regular) or https://www.amazon.com/VMPVT-001-5-Mini-Screw-Extraction-Pliers/dp/B00LMMU2HG/ref=sr_1_3?keywords=screw+extractor+pliers&qid=1559080243&s=hi&sr=1-3 (mini)

Maybe he’s talking about channel locks?

I have a set from Irwin, and absolutely love them. A little over 3 years abusing them and the button has no issues. I’ve tried the V jaw ones but I’m not a fan, the straight jaw is my preference.

Edit: maybe this is what the above comment is talking about. The idea looks the same as Irwin’s plier. Not sure who was first or which one is better.

As a DIY'er who does electrical work about half a dozen times a year, I'd agree with this. That said, I prefer the multi-tools that are a good set of pliers above all other functions (like these guys). You might give up on some other function, but you don't want to chimp on the plier aspect. IMHO

I've used those, and they do work fairly well if you can get them to grip. It's a specialty tool though, and everyone has a screwdriver.

Mine has a 3/8 square hole in it and requires a short extension. I still grab the screwdriver when it's really stuck though, mostly out of habit.

These usually work fairly well too: http://www.amazon.com/TEKTON-5866-12-Inch-Filter-Pliers/dp/B000NPR33O/ref=pd_sxp_grid_pt_1_2

I actually don't own one and I most likely never will. I got a couple of Knipex Cobra pliers as well as a Knipex Pliers Wrench instead and it's way faster and more comfortable to work with.

They grip so tight you can literally put one on a pipe and stand on it. Every mechanic where I work use them and I´ve never seen a single one with chipping, bad teeth or which has been bent.

I've found their "plier wrench" does a much better job than a regular adjustable wrench and can replace the open ended wrench in many cases, though I'm not sure how much you use your box end.

https://www.amazon.com/KNIPEX-Tools-00-20-US2/dp/B005EXNT2Y

that's the set I have.

Something like this should work: interchangeable tips even.
https://www.amazon.ca/dp/B000TG80SY/ref=cm_sw_r_cp_apa_2SXPAb9SJVAZ4

Well, 100 ft of wire runs about $8, a simple plier set runs $9,and then all you have left is to find something to use as a base.

All you need is $16 and some time. And maybe practice.

+1 for knipex pliers. I bought this three pack and they're easily my most used pliers.


KNIPEX Tools 00 20 06 US1, Cobra Pliers 7, 10, and 12-Inch Set, 3-Piece https://www.amazon.com/dp/B000X4KNTG/ref=cm_sw_r_cp_api_i_dyOQCbTNQCQSZ

I use these for a lot of stuff. They now have a coated pair that is in my cart as well.

https://www.amazon.com/Vampire-Professional-Tools-International-Extraction/dp/B006YJKAPQ

They have 7, 10, 12 on amazon.
https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94/ref=cm_wl_huc_item

As u/nails80 says, PPE and tools should be provided.
Having a pliers wrench ( https://www.amazon.co.uk/KNIPEX-pliers-wrench-chrome-plated-plastic-coated/dp/B000X4KP1C ) in your pocket is nice. With that, a pair of disposable gloves, a few rags and a foot of electrical wire you will be able to avoid a lot of trips to the toolbag ...

Here's a how-to video:

https://www.youtube.com/watch?v=DwLkxOpXSOg

Spoiler: it's not that hard, but you will need one of these to remove one of the gaskets.

The gasket I have had to change the most often is the one between the group head and the boiler. That one only requires removing a couple bolts.

The 10inch without a doubt.

http://www.amazon.com/gp/aw/d/B000X4OG94?pc_redir=1405352048&robot_redir=1

Channel locks. http://www.amazon.com/Channellock-440-12-Inch-Tongue-Groove/dp/B00004SBCU

Channellock wrench or pliers

https://www.amazon.com/Channellock-440-12-Inch-Tongue-Groove/dp/B00004SBCU

This one?
Channellock 440 12-Inch Tongue and Groove Plier https://www.amazon.com/dp/B00004SBCU/ref=cm_sw_r_cp_api_0A0Hzb0VTH9B9

https://www.amazon.com/TEKTON-5866-12-Inch-Filter-Pliers/dp/B000NPR33O

These are what I use.

TEKTON 5866 12-Inch Oil Filter Pliers https://www.amazon.com/dp/B000NPR33O

I don't have this exact model, but I have one in this style. https://www.amazon.com/TEKTON-5866-12-Inch-Filter-Pliers/dp/B000NPR33O/ref=sr_1_3?ie=UTF8&qid=1501010937&sr=8-3&keywords=oil+filter+wrench

It is my "go to" if the filter is tight and I don't have a model specific tool.

http://www.amazon.com/gp/product/B000NPR33O/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Knipex 22" Cobra Pliers - Amazon

I've had these a year now. Once thought of as a novelty has turned into a shop necessity.

I have a full set of matco... Then I found these. Life changed. They reverse and have different tips.

http://www.amazon.com/Channellock-927-8-Inch-Retaining-Plier/dp/B000TG80SY

You probably need some Ring pliers to really get in there and tighten things. I went overkill when I bought mine but they will last me a lifetime. https://www.amazon.com/Channellock-927-8-Inch-Retaining-Plier/dp/B000TG80SY/ref=sr_1_4?s=power-hand-tools&ie=UTF8&qid=1503412200&sr=1-4&keywords=snap+ring+pliers

Or get these. Best "fuckit, I'm gettin this damn thing off" adjustable wrenches ever.

https://www.amazon.com/Knipex-8701250-10-Inch-Cobra-Pliers/dp/B000X4J2H0/ref=sr_1_2?keywords=knipex+cobra&qid=1554680131&s=gateway&sr=8-2

They're pricey, but not that pricey

http://www.amazon.com/gp/aw/d/B000X4J2H0?pc_redir=1411096162&robot_redir=1

Because few people here will know what water pump pliers are, get these:

https://www.amazon.com/Knipex-002006S1-3-Piece-10-Inch-12-Inch/dp/B000X4KNTG

KNIPEX Tools 00 20 06 US1, Cobra Pliers 7, 10, and 12-Inch Set, 3-Piece
https://www.amazon.com/dp/B000X4KNTG/ref=cm_sw_r_cp_apa_aRnXBbWFRBW74

These are phenomenal as much as I've used them so far

I own this set. Pretty much covers everything so need to do.


https://www.amazon.com/KNIPEX-Tools-00-20-US1/dp/B000X4KNTG

You could use these. They are pliers that move the jaws parallel.
https://www.amazon.com/dp/B000X4KP1C/ref=cm_sw_r_cp_awdb_t1_V2n0AbZ400141

You'll mar the head. Just invest in a Knipex.

These are even better. If you have that much to spend on a niche tool.

https://www.amazon.com/7401250SBA-10-Inch-Leverage-Diagonal-Cutters/dp/B000X4MPAQ

I think these are the same.

Here is the desktop version of your link

The modern replacement is the plier wrench. Knipex is the go to but there are a few other copies:

https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

$58.99 USD

Knipex Pliers Wrench

Seems similar to the Knipex Pliers Wrench.

https://www.amazon.com/Knipex-8603250-10-Inch-Pliers-Wrench/dp/B000X4OG94

These ones won't

Saving up for this set
https://www.amazon.com/dp/B005EXNT2Y/ref=cm_sw_r_udp_awd_lEe8tb1V3C6BJ

My Knipex plier set.

r/DidntKnowIWantedThat

https://www.amazon.com/Professional-International-Vampliers-Portable-Extraction/dp/B006YJKAPQ?SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-d-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B006YJKAPQ

Try $29.97 with prime shipping.

Hakko's Long Nose Pliers!

Knipex Tools 9K 00 80 94 US Cobra Combination Cutter and Needle Nose Pliers Set (4 Piece) https://www.amazon.com/dp/B00KBCM456/ref=cm_sw_r_cp_apa_fe8KAbMFWEJRA

This would meet my needs, what do you think?

EDIT: what do you guys think of gearwrench pliers?

GearWrench 82108 7 Piece Standard Pliers Master set https://www.amazon.com/dp/B0014ZXY80/ref=cm_sw_r_cp_apa_th8KAbG67W1CQ

https://www.amazon.com/gp/aw/d/B00KBCM456/ref=mp_s_a_1_8?ie=UTF8&qid=1493770245&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=knipex+4+piece&dpPl=1&dpID=51Vw2OygVXL&ref=plSrch

The knipex was actually a 4 pc set. For the price, maybe give it a shot

Well look at that

I think this would do the trick (for the little disc, inside the rear switch). I saw it posted, by another user, on another thread, but here on Reddit, if I recall correctly.

On the website, they're referred to as retaining ring pliers, and they come with interchangeable tips.

Below are links to everything on Amazon:

Crazy Ants Reel Rolling Tool Bag Pouch Professional Electricians Organizer https://www.amazon.com/dp/B00O0FN832/ref=cm_sw_r_cp_api_OtgGzb838Y9H5

BXQINLENX 8 PCS Gundam Modeler Basic Tools Craft Set For Car Model Assemble Building(A) https://www.amazon.com/dp/B01GH6B3Z6/ref=cm_sw_r_cp_api_grgGzbFBB475F

Stanley 84-096 5-Inch Needle Nose Plier https://www.amazon.com/dp/B0001IW50Y/ref=cm_sw_r_cp_api_gtgGzb2XFXKT9

StarTech.com 7-Piece Precision Screwdriver Computer Tool Kit (CTK100P) https://www.amazon.com/dp/B0001NYK16/ref=cm_sw_r_cp_api_0ugGzbMGHA2NQ

Dynamite 5 pc Metric Nut Driver Assortment https://www.amazon.com/dp/B000BQ4XPQ/ref=cm_sw_r_cp_api_rvgGzb3V9N7CK

NEEWER® Titanium Nitride TiNi Hex Driver Wrench 4 Piece Set 1.5mm/2mm/2.5mm/3.0mm https://www.amazon.com/dp/B00CP2GGBI/ref=cm_sw_r_cp_api_7WgGzb3WEWHC0

Bondhus 12592 GorillaGrip Hex Tip Fold Up Tool with ProGuard Finish, 7 Piece https://www.amazon.com/dp/B00269YAIQ/ref=cm_sw_r_cp_api_zXgGzbJZRSBR6

There are also a few assorted items in there as well, standard scissors, small little brush(for getting dirt out of the quad in a crash), extra 12v power chord for my balance charger, small wrench(for propeller nuts), a couple extra small screw drivers. In the pouches: micro fiber cloth for fpv camera lens, zip ties and Velcro tape.

This Filter wrench has taken off every filter I've ever had with no issue. might be worth a shot.

Get yourself a pair of Vampliers. It's a set of pliers that has a bite designed to remove stripped heads. They are expensive, but they do pay themselves back in the amount of time and sanity.

No need to call a plumber. Go to Amazon and get a couple of braided stainless steel washing machine hoses and a pair of Channel locks.

Get these hoses

They will outlast the washing machine you now have and the next machine too. Use Channelocks to tighten the hoses and you're all set. For less than $40.00 you're all set and a plumber will charge you at least $75.00 to do the exact same thing and this way you get to keep the Channelock pliers for the future.

Check this stuff out. You will use this stuff a lot.

• Cannon plug pliers
  
  
• 1/4" air drill
  
  
• 90 degree die grinder
  
  
• Hand rivet squeeze kit
  
  
• Pneumatic sealant gun
  
  
• Manual sealant gun
  
  
• Nylon roller. works well for putting boots on
  
  
• Snap ring tool.
  
  
• Skin wedges
  
  
• Flexible ruler
  
  
• Dzus screwdriver
  
  
• Wera
  
  
• Knipex 5"
  
  
• Knipex 7", 10", 12"
  
  
• Retractable test leads. 30ft
  
  
• 1/4" ratchet tool. Don't forget to buy the batteries and charger.
  
  I'd also recommend looking into Snap-on's extra long wrenches in the 7/32-1/4", 5/16-3/8", and 7/16-1/2" sizes.